• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제37권3호
• /
• pp.55-62
• /
• 2000

This paper presents an analysis of the chaotic behavior in the discrete-time voltage mode chaotic generator fabricated using 0.8${\mu}{\textrm}{m}$ single poly CMOS technology. An approximated empirical equation is extracted from the measurement data of a nonlinear function block. Then the bifurcation diagram is simulated according to input variables and Lyapunov exponent λ which represent a dependence on an initial value is calculated. We show the interrelations among time waveforms, state transition, and power spectra for the state condition of chaotic circuit, such as equilibrium, periodic, and chaotic state. And results of experiments in the chaotic circuit with the $\pm$2.5V power supply and sampling clock frequency of 10KHz are shown and compared with the simulated results.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• 제35S권10호
• /
• pp.175-185
• /
• 1998

In this paper, we studied some design methodologies of typical FIR filters based on the peak-error constrained least square criterion which was first introducedd by Adams in 1991. This method is a mixed type of the classical least squared error method(LSM) and the so-called min-max error method (MMM). And by considering both the least squared error as well as the maximum error, the solution, i.e. the impulse response of the filter, can be found only when the restrictions on maximum gain, transition bandwidth, and the squared error are satisfied simultaneously under some trade-off conditions. We used the multiple exchange algorithms for optimization procedure and applied the design methodology to the cases of the multiband filter, the differentiator, and the Hilbert transformer by taking the balance of two design criteria into account. The results show that the peak-error constrained least weighted square error design method(PLEM) is superior in performance to the existing LSM and MMM from both the squared error and the maximum error standpoints. And it is verified that PLEM can be applied to not only the case of simple low pass filter, but also to various types of FIR filters.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Journal of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.257-264
• /
• 1985

Dioxobis(3-methoxysalicyaldehydato)molybdeum(VI) complex has been synthesized by reactions of 3-methoxysalicylaldehyde and ammonium paramolybdate in methanol solution. With appropriate primary amine, the resulting complex gave schiff-base complexes, MoO$_2$(CH$_3$O-sal-N-R)$_2$ in which C=O oxide ligands had been replaced by nitrogen. The properties and possible molecular structure of these complexes were discussed by elemental analysis, spectroscopic studies and electric conductivities measurements. It was found that the Mo(VI) complexes contain a cis-MoO$_2$ group since their infrared spectra two Mo=O band at about 900cm$^{-1}$ and the combining ratios for MoO$_2$-ligand are 1 : 2. Also, electronic spectra of molybdenyl complexes assigned to ligand-to-metal charge transfer transition. All of these complexes are yellow or orange, depolar compound and slightly soluble in alcohol, dichloromethane, chloroform and N,N-dimethylformamide.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.343-347
• /
• 2006

A novel, blue light-emitting polymer, poly(phenyl-9,9-dioctyl-9',9'dihexanenitrile)fluorene (PPFC6N), containing an alkyl and cyano group in the side chain, was synthesized by Suzuki polymerization and characterized. The polymer structure was confirmed by $^1H-NMR$. The number average molecular weight and the weight average molecular weight of the obtained polymer were 9,725 and 9,943 respectively. The resulting polymer was thermally stable with a glass transition temperature ($T_g$) of $93^{\circ}C$, and was easily soluble in common organic solvents such as THF, toluene, chlorobenzene and chloroform. The HOMO and LUMO energy levels of the polymer were revealed as 5.8 and 2.88 eV by cyclic voltammetry study, respectively. The ITO/PEDOT:PSS (40 nm)/PPFC6N (80 m)/LiF (1 nm)/Al (150 nm) device fabricated from the polymer emitted a PL spectrum at 450 nm and showed a real blue emission for pure PPFC6N in the EL spectrum. When t-butyl PBD was introduced as a hole blocking layer, the device performance was largely improved and the EL spectrum was slightly shifted toward deep blue. The device with PPFC6N containing t-butyl PBD layer showed the maximum luminance of 3,200 $cd/m^2$ at 9.5 V with a turnon voltage of 7 V.

• Journal of KIISE:Software and Applications
• /
• 제31권2호
• /
• pp.245-254
• /
• 2004

This paper deals with the problem of estimating structure and motion from long continuous image sequences, applying the Expectation Maximization algorithm based on extended Kalman smoother to impose the time-continuity of the motion parameters. By repeatedly estimating the state transition matrix of the dynamic equation and the parameters of noise processes in the dynamic and measurement equations, this optimization gives the maximum likelihood estimates of the motion and structure parameters. Practically, this research is essential for dealing with a long video-rate image sequence with partially unknown system equation and noise. The algorithm is implemented and tested for a real image sequence.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.142.2-142.2
• /
• 2013

The effect of substrate on catalytic activity of CO oxidation with transition metal Platinum nanoparticles on doped and undoped TiO2 was investigated. Titanium dioxide was doped chemically with non-metal anions including nitrogen and fluorine. Undoped TiO2 was synthesized via simple conventional sol-gel route. Thin films of titania were developed by spin coating technique and the characterization techniques SEM, XRD, UV-Vis Absorption Spectroscopy and XPS were carried out to examine the morphology of films, crystal phase, crystallites, optical properties and elemental composition respectively. XPS analysis from doped TiO2 confirmed that the nitrogen site were interstitial whereas fluorine was doped into TiO2 lattice substitutionally. Catalytic activity systems of Pt/doped-TiO2 and Pt/undoped-TiO2 were fabricated to reveal the strong metal-support interaction effect during catalytic activity of CO oxidation reactions. By arc plasma deposition technique, platinum nanoparticles with mean size of 2.7 nm were deposited on the thin films of doped and undoped titanium dioxide. The CO oxidation was performed with 40 Torr CO and 100 Torr O2 with 620 Torr He carrier gas. Turn over frequency was observed two to three folds enhancement in case of Pt/doped TiO2 as compared to Pt/TiO2. The electronic excitation and the oxygen vacancies that were formed with the doping process were the plausible reasons for the enhancement of catalytic activity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제11권3호
• /
• pp.592-599
• /
• 2007

The advancement of wireless technology improves the electronic learning by combining with the mobile function, and promotes the expanded transition to the mobile learning. Basically, the mobile learning provides the usefulness in terms of tile and space to provide learners with the access to the educational contents. However, the small display device and limited memory space of mobile device is limiting the access to the learning contents simply to the text-based transmission. This paper designed and implemented the multimedia mobile learning system that reduces the size of parser by define into MSMIL composed only of needed tag to multimedia contents production in the mobile devices by using the SMIL that supports the multimedia object synchronization reduces the data of multimedia learning data and enhances the transmission efficiency by applying the macro method in creating the contents of learning. The results of implementation indicates that it simplifies the designing language, makes the language learning easy, and saves the CPU resources for the parsing by reducing the size of parser.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1274-1280
• /
• 1997

The photodissociation dynamics of CH2I2 has been studied at 304 nm by state-selective photofragment translational spectroscopy. Velocity distributions, anisotropy parameters, and relative quantum yields are obtained for the ground I(2P3/2) and spin-orbit excited state I*(2P1/2) iodine atoms, which are produced from photodissociation of CH2I2 at this wavelength. These processes are found to occur via B1 ← A1 type electronic transitions. The quantum yield of I*(2P1/2) is determined to be 0.25, indicating that the formation of ground state iodine is clearly the favored dissociation channel in the 304 nm wavelength region. From the angular distribution of dissociation products, the anisotropy parameters are determined to be β(I)=0.4 for the I(2P3/2) and β(I*)=0.55 for the I*(2P1/2) which substantially differ from the limiting value of 1.13. The positive values of anisotropy parameter, however, show that the primary processes for I and I* formation channels proceed dominantly via a transition which is parallel to I-I axis. The above results are interpreted in terms of dual path formation of iodine atoms from two different excited states, i.e., a direct and an indirect dissociation via curve crossing between these states. The translational energy distributions of recoil fragments reveal that a large fraction of the available energy goes into the internal excitation of the CH2I photofragment; < Eint > /Eavl=0.80 and 0.82 for the I and I* formation channels, respectively. The quantitative analysis for the energy partitioning of available energy into the photofragments is used to compare the experimental results with the prediction of direct impulsive model for photodissociation dynamics.

• The Korean Journal of Archival Studies
• /
• 제54호
• /
• pp.289-310
• /
• 2017

This study aims to propose task areas which have to be discussed for reforming of the Public Records and Archives Act in Korea. For drawing the task areas, it analysed the pending issues mainly presented in the policy forums co-hosted by Korean Society of Archival Studies and Korean Association of Records Managers and Archivists, and examined researches providing tasks of revising of the law or rebuilding public records policies related in digital records management. The 4 task areas were identified, which were the exhaustive documentation of the public agencies' activities, the reexamination of the appraisal systems for public records and archives, the transition into the 2nd generation-digital records management, and the redefinition of roles and responsibilities of the records/archival institutions. Then it placed the issues into the 4 areas, and proposed some suggestions for further discussions in each tasks. Reminding that the task areas proposed in this study are not comprehensive, further suggestions and arguments will be expected for reforming the Public Records and Archives Act.