• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.451-458
• /
• 2002

Absorptive type SP3T(Single Pole Three Throw) and SP8T switch modules over the 6-18 GHz are designed and fabricated. The epitaxial structure of GaAs PIN diode for switch modules are designed for low loss and high power capability. The maximum input power of SP3T and SP8T switch modules are 2 W and 1 W, respectively. The switching time with driver circuit is less than 130 nsec. The maximum insertion loss of SP3T switch module and SP8T module shows 2.8 dB and 4.2 dB, respectively. The isolation between input port and output port is more than 55 dB. Two switch modules for electronic warfare system have passed the environment tests of the related test items.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.3-4
• /
• 2006

${Li_2}{CO_3}$ and MgO doped paraelectric ${Ba_{0.5}}{Sr_{0.5}}{TiO_3}$, materials were prepared and compared for LTCC applications. In these days LTCC (Low Temperature Co-fired Ceramics) technology has been widely employed for electronic modules for the communication systems such as front-end modules, antenna modules, and switching modules. In this paper, 1 ${\sim}$ 5 wt % of ${Li_2}{CO_3}$, and 30 wt % of MgO were added to ${Ba_{0.5}}{Sr_{0.5}}{TiO_3}$, respectively. The crystalline properties and electrical properties will be compared and discussed.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.252-257
• /
• 2021

The application of the principle of trigeneration allows to simultaneously provide electricity to power electronic devices, as well as heat and cold to create the necessary microclimate of the premises and increase efficiency compared to separate cooling and heating systems. The use of Peltier thermoelectric modules (TEM) as part of trigenerative systems allows for smooth and precise control of the temperature regime, high manufacturability and reliability due to the absence of moving parts, resistance to shock and vibration, and small weight and size parameters of the system. One of the promising areas of improvement of trigenerative systems is their modeling and optimization based on the automatic control theory. A block diagram and functional model of an energy-saving trigenerative climate control system based on Peltier modules are developed, and the transfer functions of an open and closed system are obtained. The simulation of the transient characteristics of the system with varying parameters of the components is performed. The directions for improving the quality of transients in the climate control system are determined, as well as the prospects of the proposed methodology for modeling and analyzing control systems operating in substantially nonlinear modes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.253-266
• /
• 1998

A numerical study on the cooling performance for electronic components mounted with heat sink in an electronic system has been performed. The model of electronic system consisted with lower and upper modules in which the electronic components mounted with heat sink were arrayed. To find better configuration under a given fan power for effective cooling, the cases called 'No heat sink','Both heat sinks','Lower heat sinks', and 'Upper heat sinks' were tested. The results showed that the cooling performance in 'Upper heat sinks' was the best among four cases.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.110-115
• /
• 2008

In this paper, we have designated a 42-inch RGB LED BLU, 80 % above illuminance. A desirable brightness performance was attained, by doing anti-parallel configuration, a fitting of LED's strip distance and a height of the top of LED to the back of the LCD. We get the 85.81 % of the brightness uniformity which has 12.8 mm away from LED's top and LCD's back and 51.41 mm of the same spacing between LED's strip in simulation and 82.24 % in experiment.

• Journal of the Optical Society of Korea
• /
• v.2 no.2
• /
• pp.80-82
• /
• 1998

A new fiber coupling scheme using thermally over-expanded core(TOEC) fiber was proposed and demonstrated. In the coupling experiment between 1.3${\mu}{\textrm}{m}$ FP-LD and the proposed TOEC fiber with a tapered hemispherical microlens. superior performances such as a long working distance, a high coupling efficiency, and large misalignment tolerances were verified experimentally.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.210-210
• /
• 2009

This paper describes the analysis results of an generated power with a inclined solar radiation. 2 different types of modules were employed to study the effect of the a inclined solar radiation on the generated power amount. As a result, it was confirmed that the generated power increased with the solar radiation and the mono crystal type cells generated higher power than the thin film type cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.186-188
• /
• 2008

The wireless communication revolution has spawned a revival of interest in the design and optimization of radio transceivers. Radio transmit modules continue to shrink in die size and cost, requiring novel approaches for integration of the numerous passive elements of the radio front-end. A 3 dB Wilkinson power divider based on GaAs substrates, for DCS 1710-1880 MHz band was designed and fabricated showing excellent performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2356-2366
• /
• 1996

High-power electronic chips have been advanced to such an extent that the heat dissipation capability of a system design has become one of the primary limiting factors. Therefore, thermal design must be considered in the early stage of the electronic system development. In present paper, the results of an experimental study on the forced convection cooling are presented to evaluate cooling performance of an electronic cabinet which in generally used for telecommunication system. Temperatures and thermal resistances are applied to compare the heat transfer characteristics for various locations of a fan unit as well as various configuration of non-uniform powering modules. As a result, the optimal configuration of a fan unit and powering configuration is suggested for the effective thermal design of telecommunication system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1327-1331
• /
• 1990

A new dual loop controller using color LCD bar graphs with LED back lights has been developed. An optional memory card is used to load or save the controller configuration, which may be a preprogrammed standard package or a user-programmed configuration, in addition to the built-in functions ready for user selection. The bar-graph display is selectable for single-loop or dual-loop use. A high grade of self-tuning functions using a modeling technique is built-in as standard. The controller can accommodate optional plug-in modules for thermocouples, communication, etc. All the options are fully field upgradable.