• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.4-4
• /
• 2009

Paper factories use a large amount of water and same amount of wastewater is generated. It is important to recycle the wastewater because of water shortages and water pollution. The existing water treatment facilities like precipitation process need large-scale equipment and wide space to purify the wastewater of paper factory. High gradient magnetic separation (HGMS) system has the merits to purify rapidly because of large voids at filter and to occupy small space. In this paper, two types of superconducting magnets were used for HGMS systems. Cryo-cooled Bi-2223 superconducting magnet system with 70 mm room temperature bore and 200 mm of height was prepared. Cryo-cooled Nb-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets. The various magnetic seeding reactions were investigated to increase the reactivity of coagulation. The effects of magnetic separation of wastewater were investigated as variation of magnetic field strength and flow rate of wastewater.

• 한국전자통신학회논문지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2021

본 논문에서는 원자력 발전소에서 사용되는 디지털 모듈을 포함하는 캐비닛의 전자파 차폐효과를 외부 전파원과 내부 디지털 모듈의 배치 변화에 따라 분석하였다. 차폐효과를 분석하기 위해서 FEKO EM 시뮬레이션 툴을 사용하여 캐비닛과 모듈을 모델링하였으며, 캐비닛의 유무에 따른 전계값을 통해서 차폐효과 분포를 도출하였다. 차폐효과는 2.4 GHz 주파수에서 캐비닛에 대한 입사각, 편파 그리고 모듈의 간격에 따라 관찰하였다. 결과 검증을 위해 차폐효과 측정용 다이폴안테나를 설계 및 제작하고 이를 활용해 캐비닛의 차폐효과를 측정하였다. 결과에 따르면 캐비닛 구조는 입사되는 전파의 편파가 지면에 수평하고, 디지털 모듈간의 간격이 넓을 때 더 높은 차폐효과를 기대 할 수 있는 것으로 분석되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1865-1869
• /
• 2004

A new model for the propagation prediction for mobile communication network inside building is presented in this paper. The model is based on the determination of the dominant paths between the transmitter and the receiver. The field strength is predicted with adaptive neuro - fuzzy inference systems (ANFIS), trained with measurements. The advantage of the ANFIS with hybrid least squares and gradient descent algorithms is fast convergence compared with original neural network. The K-means algorithm for selection of training patterns is also used. Comparison of our predicted results to measurements indicate that improvements in accuracy over conventional empirical model are achieved.

• 소성∙가공
• /
• 제14권2호
• /
• pp.147-152
• /
• 2005

The objective of this study is to develop an optimal drawing die for the clad wire drawing process. Cu-clad wire, which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used in the field of the telecommunications, electric-electronic and military technology industries. It is important to obtain uniformly coated rate when producing clad wires. Drawing process of clad wire will be influenced on damage and coated rate of core and sleeve for process variables such as semi-die angle and reduction in area. Therefore, in this study, the finite-element result obtained in this study was analyzed to the effect of the various forming parameters, which included the semi-die angle and reduction in area. The coated rate will be predicted with observation of copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.67.2-67.2
• /
• 2012

Graphene is expected to have a significant impact in various fields in the foreseeable future. For example, graphene is considered to be a promising candidate to replace indium tin oxide (ITO) as transparent conductive electrodes in optoelectronics applications. We report the tunability of the wavelength of localized surface plasmon resonance by varying the distance between graphene and Au nanoparticles [1]. It is estimated that every nanometer of change in the distance between graphene and the nanoparticles corresponds to a resonance wavelength shift of ~12 nm. The nanoparticle-graphene separation changes the coupling strength of the electromagnetic field of the excited plasmons in the nanoparticles and the antiparallel image dipoles in graphene. We also show a hysteresis in the conductance and capacitance can serve as a platform for graphene memory devices. We report the hysteresis in capacitance-voltage measurements on top gated bilayer graphene which provide a direct experimental evidence of the existence of charge traps as the cause for the hysteresis [2]. By applying a back gate bias to tune the Fermi level, an opposite sequence of switching with the different charge carriers, holes and electrons, is found [3]. The charging and discharging effect is proposed to explain this ambipolar bistable hysteretic switching.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1039-1040
• /
• 2006

In this study, we have been constructed measuring system for interference for TV broadcasting signals between Korea and Japan. In Busan, we have been measured 14 channel of Japan TV broadcasting signals during 4 days. The quality of image is that 2.5 level is maximum grade, and the quality of sound is that 3 level is maximum grade. And we have been observed Japan TV broadcasting signals, in Busan, Ulsan, and Pohang. There are detected 40 channels. The 19, 24, 29, 36, 39 channels have 3.0 grade image quality and The maximum field strength is $71dB{\mu}V$/m.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.211-214
• /
• 1995

The catalytic activities of palladium(0,Ⅰ,Ⅱ)-diphosphine complexes were investigated in styrene oxidation using H2O2 as terminal oxidant. The rates showed a dependence on the chelate ring patterns of complexes (PdCl2L); 5-membered ring (L=dppe: 1,2-bis(diphenylphosphino)ethane) < 6-membered ring (L=dppp: 1,3-bis(diphenylphosphino)propane) < 4-membered ring (L= dppm: bis(diphenylphosphino)methane). This sequence correlates with the ligand field strength and interactions between metal and phosphine ligands. Pd(Ⅱ,Ⅰ)-diphosphine complexes which are capable of making 4-membered chelate ring showed an enhancement of catalytic activities for styrene oxidation. The catalytic activities of Pd(0,Ⅰ,Ⅱ)-diphosphine complexes are described in terms of electronic and steric factors.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1479-1487
• /
• 2011

모바일 IT기기 등의 전자부품 분야에서 다기능, 고용량 메모리를 가능하게 하는 패키지의 중요성이 점차 증대되고 있다. 이러한 목적으로 여러개의 칩을 하나의 패키지에 실장하여 다기능, 고용량을 구현하는 Multi Chip Package(MCP)가 활용되고 있다. 이러한 MCP에서 칩과 칩간 접합 혹은 칩과 지지부재(substrate)간 접합을 구현하기위해 에폭시계 필름형 접착제가 사용되고 있다. 에폭시, 아민, 머캡탄, 아이소시아네이트 등의 유기 반응기를 가진 실란커플링제를 적용하여 에폭시계 필름형 접착제에 대한 점착성과 신뢰성을 확인하였다. 결과로부터 에폭시계 반응기를 가진 실란커플링제를 적용한 시료의 점착성과 필특성이 가장 뛰어났으며, 내습 테스트에서 계면파괴가 억제되어 가장 좋은 신뢰성을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.108-108
• /
• 2007

Inkjet printing is a non-contact and direct writing associated with a computer. In the industrial field, there have been many efforts to utilize the inkjet printing as a new way of manufacturing, especially for electronic devices. The etching resist used in this process is an organic polymer which becomes solidified when exposed to ultraviolet lights and has high viscosity of 300 cPs at ambient temperature. A piezoelectric-driven ink jet printhead is used to dispense $20-40\;{\mu}m$ diameter droplets onto the copper substrate to prevent subsequent etching. In this study, factors affecting the pattern formation such as printing resolution, jetting property, adhesion strength, etching and strip mechanism, UV pinning energy have been investigated. As a result, microscale Etch resist patterning of printed circuit board with tens of ${\mu}m$ high have been fabricated.

• 비파괴검사학회지
• /
• 제21권5호
• /
• pp.518-525
• /
• 2001

증기발생기 전열관이 노후화 됨에 따라 새롭고 판단이 애매한 결함이 발생되기 시작하고 있다. 대부분의 결함은 전열관 외부에서 발생되어 진전된다. 일반 와전류탐상에서는 외부결함으로부터의 신호가 표피효과로 인해 내부결함으로부터의 신호보다 매우 약하기 때문에, 본 논문에서는 자성체 관 검사에서 내부 및 외부결함에 거의 같은 민감도를 보인 바 있는 원격장와전류 탐상을 비자성체인 전열관의 검사에 적용하기 위한 연구를 수행하였다. 유한요소 모델링을 통한 연구결과는 비자성체인 전열관에서 원격장와전류 효과가 나타나려면 탐상주파수가 수백 kHz가 되어야 하며, 여자코일과 센서코일간의 간격은 자성 관 검사시의 절반인 관 외경의 1.5배 정도가 되어야 함을 보였다. 이렇게 설계된 탐촉자를 사용하여 예측한 결함신호들은 이 검사방법이 내부 및 외부결함에 동일하게 민감하며, 위상신호의 세기와 결함깊이간에는 선형적인 비례관계가 존재함을 보여 주었다. 이러한 결과들은 비자성 증기발생기 전열관이라 할지라도 원격장와전류 탐상이 가능함을 말해 주고 있다.