• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.397-402
• /
• 2023

We have developed inverted green phosphorescent organic light emitting diodes (OLEDs) using 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and bis(carbazole-9-yl)biphenyl (CBP) hole transport layers. The driving voltage, current efficiency, power efficiency, and emission characteristics of devices were investigated. While the driving voltage for the same current density was about 1~2 V lower in the devices with the TAPC layer, the maximum luminance was higher in the device with the CBP layer. The maximum current efficiency and power efficiency were 3.2 and 2.7 times higher in the device with the CBP layer, respectively. The higher efficiency in the CBP device resulted from the enhanced hole-electron balance although weak parasitic recombination takes place in the CBP hole transport layer.

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.370-377
• /
• 2023

Soft and stretchable electronics, equipped with diverse functional devices, have recently garnered attention owing to their versatility in applications such as stretchable displays, flexible batteries, and electronic skin (e-skin). A fundamental challenge in realizing stretchable electronics lies in conferring the necessary flexibility to crucial electrical components such as electrodes and devices. However, the prevalent electronic materials, exhibit limited stretchability, presenting a significant obstacle to the advancement of soft and stretchable electronics. To overcome this challenge, various strategies rooted in geometrical engineering have been explored to enhance the adaptability of rigid materials. This study delves into the realm of geometrical engineering by, examining techniques such as serpentine patterns, kirigami-inspired designs, and island structures, with a keen focus on recent progress and future prospects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.451-456
• /
• 2024

Organic photovoltaic (OPV) devices have attracted attention due to their high efficiency and simple manufacturing process. Applying an overlayer to OPV devices is one way to improve their performance because it can improve charge extraction and suppress vertical phase separation. In addition, dichloromethane (DCM) was used as an orthogonal solvent to minimize the effect on other layers. However, an coating problems due to the use of DCM were found, which affects surface morphology as rough or peeling. Additional research efforts are needed to solve these problems, and optimal results are expected to be obtained by utilizing various buffer layers or selective organic solvents.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.234-234
• /
• 2003

Indium tin oxide(ITO) is an advanced ceramic material with many electronic and optical applications due to its high electrical conductivity and transparency to light ITO thin films are used in transparent electrodes for display devices, transparent coatings for solar energy heat mirrors and windows films in n-p heterojunction solar cells, etc. Almost all display devices were fabricated on transparent ITO electrode substrates. There are several factors that cause decay in the efficiency and the failure of display devices. The degradation or damage of ITO is one of the main factors. Under normal operating conditions, the electric fold required for the operation of display devices is very high As a high electric field induces the joule heat, the degradation of the ITO thin film may be expected. Therefore, it is worthy to investigate the thermal and electrical effect on ITO thin films.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.69-77
• /
• 1999

As the use of automatic handling equipment for sensitive semiconductor devices is rapidly increased, manufacturers of electronic components and equipment need to be more alert to the problem of electrostatic discharges(ESD). Semiconductor devices such as IC, LSI, VLSI become a high density pattern of being more fragile by ESD phenomena. One of the most common causes of electrostatic damage is the direct transfer of electrostatic charge from the human body or a charged material to the electrostatic discharge sensitive devices. Accordingly, characteristics of electrostatic attenuation in domestic semiconductor devices is investigated to evaluate the ESD phenomina in the semiconductors in this paper. The required data are obtained by Static Honestmeter. Also The results in this paper can be used for the prevention of semiconductor failure by ESD.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.249-250
• /
• 2015

Technological advance of power elcetronic devices using semiconductor switches in last several decades, invoke the increase of switching devices' penetration in the system like STATCOM or HVDC and also, increase the difficulty to adjust switching characteristics in the virtual simulating configuration, which are not capable of reflect the detailed phenomena. To investigate harmful effect of switching devices into the grid, detailed modeling of power electronic devices are necessary, and the first step for entire grid modelling is simulate power system in time domain model. In this paper, simple two bus system with synchronous generator and infinite bus on the other side has been compromised in two simulation environment, using PSS/E and Matlab/Simulink. Comparing the result of two simulation result will give answers to the fundamental difference between two type of simulation environment.

• Annual Conference of KIPS
• /
• 2015.04a
• /
• pp.482-484
• /
• 2015

M2M technology enables us to "Things" and collect various kinds of information from "Things". M2M is defined as a technology that enables electronic and mechanical devices to communicate with each other seamlessly and perform actions without human intervention. In this paper, we review some security solutions for M2M devices and show our light weight framework which is responsible for security of constrained M2M devices. In addition to the above-mentioned ones, we propose the framework can be applied for constrained environment and give conclusion and future works.

• Electronics and Telecommunications Trends
• /
• v.33 no.6
• /
• pp.50-57
• /
• 2018

As devices have evolved, traditional flip chip bonding and recently commercialized thermocompression bonding techniques have been limited. Laser-assisted bonding is attracting attention as a technology that satisfies both the requirements of mass production and the yield enhancement of advanced packaging interconnections, which are weak points of these bonding technologies. The laser-assisted bonding technique can be applied not only to a two-dimensional bonding but also to a three-dimensional stacked structure, and can be applied to various types of device bonding such as electronic devices; display devices, e.g., LEDs; and sensors.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.3
• /
• pp.229-232
• /
• 2005

Finite element method (FEM) is a very powerful tool for the calculation of magnetic field of electromagnetic devices. MATLAB/Simulink is also well known as a very useful tool for control systems. This paper proposes a very promising method, where the FEM is coupled with MATLAB. We apply this method to analyze a permanent magnet (PM) motor drive system, and compare with results using MATLAB only.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.69-70
• /
• 2006

A detailed Investigation of cell structure and electrical characteristic in chalcogenide-based phase-change random access memory(PRAM) devices is presented. We used compound of Ge-Sb-Te material for phase-change cell. A novel bottom electrode structure and manufacture are described. We used heat radiator structure for improved reset characteristic. A resistance change measurement is performed on the test chip. From the resistance change, we could observe faster reset characteristic.