• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.91-97
• /
• 2012

Recently, the performances of electrical and electronic devices are improving while the sizes are becoming smaller. As sound-generating systems, the two-dimensional speakers have been developed in place of conventional three-dimensional ones. Piezoelectric materials show the mechanical vibrations due to the voltage applied from outside the materials. The early film speakers had a limitations of output power in that it was not easy to make the conducting macromolecular films on the surfaces of the materials due to the internal chemical properties of materials. We have adopted the corona surface treatment in order to improve the output characteristics by increasing the adhesion of the coating material on to the surface of the center material of piezo film. The results showed the improvement of output power in the wider range of operating frequencies.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2018

The technology convergence of television, communication, and computing devices enables the rich social and entertaining experience through Smart TV in personal living space. The powerful smart TV computing platform allows to provide various user interaction interfaces like IR remote control, web based control, body gesture based control, etc. The presently used smart TV interaction user control methods are not efficient and user-friendly to access different type of media content and services and strongly required advanced way to control and access to the smart TV with easy user interface. This paper propose the optical wireless communication (OWC) based remote controller design for Smart TV using smart device Flashlights. In this approach, the user smart device act as a remote controller with touch based interactive smart device application and transfer the user control interface data to smart TV trough Flashlight using visible light communication method. The smart TV built-in camera follows the optical camera communication (OCC) principle to decode data and control smart TV user access functions according. This proposed method is not harmful as radio frequency (RF) radiation does it on human health and very simple to use as well user does need to any gesture moves to control the smart TV.

• Journal of Digital Contents Society
• /
• v.17 no.4
• /
• pp.287-293
• /
• 2016

Some studies require sufficient amount of time, spaces, and financial condition for practical exercises and training. In particular for the Medical education, time and space limitation is very high and difficulties occurs, since the practices are done with cadavers (deceased human body). Many alternate 3D Virtual surgery training system exist currently, however the burdensome of obtaining those costly equipments is problematic. Providing the surgical environment as similar to real as possible using 3D Virtual Reality can be a solution to current problems. The effectiveness of training could be maximized with minimized costs without the general interfaces such as keyboard and mouse, but with Oculus Rift and Leap Motion. This paper will develop and practice the 3D Virtual Operation System with two devices to investigate the possibility and expand to other Simulation fields.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1779-1785
• /
• 2018

In this paper, we propose an error correction method to improve the accuracy of human activity recognition using sensor event data obtained by smart devices such as wearable and smartphone. In the context awareness through the smart device, errors inevitably occur in sensing the necessary context information due to the characteristics of the device, which degrades the prediction performance. In order to solve this problem, we apply Kalman filter's error correction algorithm to compensate the signal values obtained from 3-axis acceleration sensor of smart device. As a result, it was possible to effectively eliminate the error generated in the process of the data which is detected and reported by the 3-axis acceleration sensor constituting the time series data through the Kalman filter. It is expected that this research will improve the performance of the real-time context-aware system to be developed in the future.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.1
• /
• pp.20-29
• /
• 2015

This study investigated the demand of nutrition education programs among preschooler's parents. Focus group interview was conducted four times with 29 parents of preschool children. Most subjects appeared to have interest in nutrition education; 'very interested' (58.6%), 'somewhat interested' (20.7%). Sources of nutrition information were 'internet' (35.1%), 'books' (21.6%), 'newspaper or magazines' (13.5%), 'family or relatives' (13.5%), 'media' (8.1%), 'preschool' (5.4%) and 'hospital or public health center' (2.7%) in order. The most frequently mentioned health problems related to dietary behavior were atopy and obesity. Major concerns for children's dietary behavior was picky eating habits, and having questions for how to deal with this problem. Most subjects had trouble with obtaining an adequate amount of dietary supplements for their children. Nutrition education for parents about food labeling and information on processed foods was in demand. Preferred methods of nutrition education for children were playing games with stickers, gardening vegetables, and participating in cooking. Attitudes toward computer-assisted education materials, one of the methods of nutrition education, appeared to be ambivalent. Some preschool parents showed negative attitudes towards exposing their children to electronic devices at an early age, whereas others showed positive attitudes. Subjects were interested in meal-planning and ways to balance nutrients for their child. Parents preferred attending professional lectures to receive reading materials or searching websites as an adult nutrition education method. Results of this study have implications on providing basic information for developing nutrition education programs for preschoolers and their parents. Future research should focus on developing nutrition education programs for both preschools and the home.

• Journal of Sensor Science and Technology
• /
• v.29 no.1
• /
• pp.7-13
• /
• 2020

Dielectric capacitors are integral components in electronic devices that protect the electric circuit by providing modulated steady voltage. Explosive growth of the electric automobile market has resulted in an increasing demand for dielectric capacitors that can operate at temperatures as high as 400 ℃. To surpass the operation temperature limit of currently available commercial capacitors that operate in temperatures up to 125 ℃, Bi_1/2Na_1/2TiO₃ (BNT), which has a large temperature-insensitive dielectric response with a maximum dielectric permittivity temperature of 300 ℃, was selected. By introducing an intentional A-site cation deficiency and post-heat treatment, we successfully manage to control the dielectric properties of BNT to use it for high-temperature applications. The key feature of this new BNT is remarkable reduction in dielectric loss (0.36 to 0.018) at high temperature (300 ℃). Structural, dielectric, and electrical properties of this newly developed BNT were systematically investigated to understand the underlying mechanism.

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.249-254
• /
• 2020

It is difficult to control children who exhibit negative behavior in dental clinics. Various methods are used for preventing pediatric dental patients from being afraid and for eliminating the factors that cause psychological anxiety. However, when it is difficult to apply this routine behavioral control technique, sedation therapy is used to provide quality treatment. When the sleep anesthesia treatment is performed at the dentist's clinic, it is challenging to identify emergencies using the current breath detection method. When a dentist treats a patient that is under the influence of an anesthetic, the patient is unconscious and cannot immediately respond, even if the airway is blocked, which can cause unstable breathing or even death in severe cases. During emergencies, respiratory instability is not easily detected with first aid using conventional methods owing to time lag or noise from medical devices. Therefore, abnormal breathing needs to be evaluated in real-time using an intuitive method. In this paper, we propose a method for identifying abnormal breathing in real-time using an intuitive method. Respiration signals were measured using a 3M Littman electronic stethoscope when the patient's posture was supine. The characteristics of the signals were analyzed by applying the signal processing theory to distinguish abnormal breathing from normal breathing. By applying a short-time Fourier transform to the respiratory signals, the frequency range for each patient was found to be different, and the frequency of abnormal breathing was distributed across a broader range than that of normal breathing. From the wavelet transform, time-frequency information could be identified simultaneously, and the change in the amplitude with the time could also be determined. When the difference between the amplitude of normal breathing and abnormal breathing in the time domain was very large, abnormal breathing could be identified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.140-140
• /
• 1999

Ti/Ni multilayered films (MLF) are ideal for neutron optics particularly in neutron guides and focusing devices. This system also possesses the tendency of amorphization through a solid-state reaction (SSR). This behaviors are closely related to the electronic structures and both magneto-optical (MO) and optical properties of metals depend strongly on their electron energy structures. Mutual inter-diffusion of the Tin and Ni atoms in the MLF caused by a low temperature annealing should decrease the thickness of pure Ni, as well as change the chemical and atomic order in the reactive zone. The application of the MO spectroscopy to the study of SSR in the MLF allows us to obtain an additional information on the changes in the atomic and chemical orders in the interface region. The optical one has no restriction on the magnetic state of the constituent sublayers. Therefore, the changes in magnetic, MO and optical properties of the Ti/Ni MLF due to SSR can be expected. To the best of our knowledge, the MO and optical spectroscopies were not used for this purpose. SSR has been studied in the series of the Ti/Ni MLFs with bilayer periods of 0.65-22.2nm and constant ratio of the Ti to Ni sublayers thickness by using MO and optical spectroscopies as well as an x-ray diffraction. The experimental MO and optical spectra are compared with the computer-simulated spectra, assuming various interface models. The relative changes in the x-ray diffraction spectra and MO properties of the Ti/Ni MLF caused by annealing are bigger for the multilayers with "thick" sublayers, or the SSR with the formation of amorphous alloy takes place mainly in the Ti/Ni multilayers with "thick" sublayers, while in the nominal threshold thickness of the Ni-sublayer for the observation of the equatorial Kerr effect in the as-deposited and annealed Ti/Ni MLFs of about 3.0 and 4.5nm thick is explained by the formation of amorphous alloy during the deposition or the formation of the nonmagnetic alloyed regions between pure components as a result of the SSR. For the case of Ti/Ni MLF the MO approach is more sensitive for the determination of the thickness of the reacted zone, while x-ray diffraction is more useful for structural analyses.structural analyses.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.43-55
• /
• 2000

In traditional electronic packages the die and the substrate are interconnected with fine wire. Wire bonding technology is limited to bond pads around the peripheral of the die. As the demand for I/O increases, there will be limitations with wire bonding technology. Flip chip technology eliminates the need for wire bonding by redistributing the bond pads over the entire surface of the die. Instead of wires, the die is attached to the substrate utilizing a direct solder connection. Although several steps and processes are eliminated when utilizing flip chip technology, there are several new problems that must be overcome. The main issue is the mismatch in the coefficient of thermal expansion (CTE) of the silicon die and the substrate. This mismatch will cause premature solder Joint failure. This issue can be compensated for by the use of an underfill material between the die and the substrate. Underfill helps to extend the working life of the device by providing environmental protection and structural integrity. Flux residues may interfere with the flow of underfill encapsulants causing gross solder voids and premature failure of the solder connection. Furthermore, flux residues may chemically react with the underfill polymer causing a change in its mechanical and thermal properties. As flip chip packages decrease in size, cleaning becomes more challenging. While package size continues to decrease, the total number of 1/0 continue to increase. As the I/O increases, the array density of the package increases and as the array density increases, the pitch decreases. If the pitch is decreasing, the standoff is also decreasing. This paper will present the keys to successful flip chip cleaning processes. Process parameters such as time, temperature, solvency, and impingement energy required for successful cleaning will be addressed. Flip chip packages will be cleaned and subjected to JEDEC level 3 testing, followed by accelerated stress testing. The devices will then be analyzed using acoustic microscopy and the results and conclusions reported.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.25-30
• /
• 2000

Ion mass doping method has been implemented for the fabrication of large area electronic devices such as TFT-LCD. In this work, the effect of ion mass doping on the velocity and the behavior of MILC was investigated. When amorphous silicon was either doped or bombarded by accelerated ions, MILC velocity was reduced by over 50% and the front edge of MILC became coarse. In order to analyze the dependence of silicon film's properties on ion mass doping, ultraviolet reflectance and sulfate roughness were investigated. Both the velocity and the behavior of MILC were found to be related with the increase of surface roughness by ion bombardment.