• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.365-371
• /
• 2002

In this paper, the fabricated power PHEMT devices for millimeter-wave that is below a gate-length of 0.2 $\mu\textrm{m}$ using electronic beam lithography technologies, and the DC and frequency characteristics and an output power characteristics were Measured at the various bias conditions. The unit process that is used in PHEMT's manufacture used that low-resistance ohmic contact, air-bridge and back-side lapping process technologies, and so on. The fabricated power PHEMT have an S521 gain of 4 dB and a maximum transconductance(gm) of 317 mS/mm, an unilateral current gain(fT) of 62 GHz, a maximum oscillation frequency(fmax) of 120 GHz at 35 GHz, and a maximum power output(Pmax) of 16 dBm, a power gain(GP) of 4 dB and a drain efficiency(DE) of 35.5 %.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

LMTT (Linear Motor-based Transfer Technology) is a horizontal transfer system for the yard automation. which has been proposed to take the place qf AGV (Automated Guided Vehicle) in the maritime container terminal. the system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle mr. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research structural optimization for a mover of shuttle mr is performed to minimize the weight satisfying design criteria the objective function is set up as weight. On the contrary, design variable is considered as transverse, longitudinal and wheel beam's thickness and shape variable determining the dimension toward high direction and the constraints are the stresses.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.155-160
• /
• 2000

The piezoelectric properties and the doping effect for$0.95Pb(Zr_xTi_{1-x})O_3+0.05Pb(Mn1/3Nb2/3)O_3$ compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the values of kp and $\varepsilon33T$ were maximized, but Qm was minimized(Kp=0.57, Qm=1550) in the composition of x=0.51. In order to increase the values of Qm $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of kp decreased, and the values of Qm increased with doping concentration of $Nb_2O_5$. As a experiment results under high electric field driving, when vibration velocity was lower than 0.6[m/s], the temperature increase was $20[^{\circ}C]$, and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2007

Systematic components for implementing ubiquitous computing, for example, electronic devices, electric home appliances, and controllers, etc, are consist of not only circuits but also softwares expected to do some special system-controlling functions, and these softwares used to be called like as embedded software. Because embedded software is a core component controlling systems, the codes or control flows should be protected from being opened to the public or modified. Embedded software security can be divided into 2 parts: first is the unauthorized access to development site and embedded software, second is the unauthorized disclosure or modification. And this research is related to the first aspect of them.This paper proposes some security check requirements related to embedded software development site by analyzing the ALC_DVS.1 of the ISO/IEC 15408 and Base Practices (BPs) of the ISO/IEC 21827. By applying this research, we expect to protect unauthorized modification of embedded software indirectly.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.39-44
• /
• 2014

In this paper, we study the light pen emulator implementation that can be used in industrial computer. For use in industrial control field, an input device of an industrial machine is an electronic pen is usually used, but now many cases, a light pen cannot be used to the computer. In this study, the light pen emulator to substitute for the function that is available to the peripheral device on the PC, now. So we want to increase the utilization of industrial computer in this research. The light pen emulator was designed by USB HOST, CPLD and MPU. Light pen signal, after interpret the input from the touch screen and mouse and USB system data, was output by calculating screen coordinates. As a result, we showed that it is possible to use the computer in a variety of industrial devices such as a mouse, digitizer, touch screen, stylus, and designed emulator.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.205-212
• /
• 2016

In this paper, we implement the development platform of multichannel digital hearing aid algorithm using Simulink provided by Matlab. The digital hearing aids are considered medical devices designed to compensate for hearing loss, they need to be correctly selected, to help a person who has difficulty in hearing. The development platform that implemented in this paper, includes WOLA filterbank for analysis/synthesis of input signal, Wide dynamic range compression for hearing loss compensation and adaptive filter for feedback cancellation. Using the development platform, algorithm parameters for each block can be set depending on the hearing aid user. Thus it is possible to test the algorithm before the machine language. As a result, the time for algorithm development can be saved and performance and computational complexity can be optimized.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.165-175
• /
• 2015

Energy storage system has been widely applied in power distribution sectors as well as in renewable energy sources to ensure uninterruptible power supply. This paper presents a model predictive algorithm to control a bidirectional AC-DC converter, which is used in an energy storage system for power transferring between the three-phase AC voltage supply and energy storage devices. This model predictive control (MPC) algorithm utilizes the discrete behavior of the converter and predicts the future variables of the system by defining cost functions for all possible switching states. Subsequently, the switching state that corresponds to the minimum cost function is selected for the next sampling period for firing the switches of the AC-DC converter. The proposed model predictive control scheme of the AC-DC converter allows bidirectional power flow with instantaneous mode change capability and fast dynamic response. The performance of the MPC controlled bidirectional AC-DC converter is simulated with MATLAB/Simulink(R) and further verified with 3.0kW experimental prototypes. Both the simulation and experimental results show that, the AC-DC converter is operated with unity power factor, acceptable THD (3.3% during rectifier mode and 3.5% during inverter mode) level of AC current and very low DC voltage ripple. Moreover, an efficiency comparison is performed between the proposed MPC and conventional VOC-based PWM controller of the bidirectional AC-DC converter which ensures the effectiveness of MPC controller.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.1
• /
• pp.31-40
• /
• 2014

In Korea, the Public Key Infrastructure (PKI) has been introduced. For secure information transmission and identification, the electronic signature authorization system of a certificate-based is built, and then the service provide.The certificate is stored in location what users can easily access and copy. Thus, there is a risk that can be stolen by malware or web account hacking. In addition, private key passwords can be exposed by the logging tool, after keyboard security features are disabled. Each of these security weaknesses is a potential conduit for identity theft, property/asset theft, and theft of the actual certificates. The present study proposes a method to prevent the private key file access illegally. When a certificate is stored, the private key is encrypted by the dependent element of the device, and it is stored securely. If private key leakage occurs, the retrieved key could not be used on other devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1859-1864
• /
• 2014

Liquid silicone rubber(LSR) has been applied to various products such as electronic devices owing to its excellent thermal and chemical resistance. Hyperelastic materials, however, have properties distinguished from general metal materials. Hyperelastic materials show elastic behaviors in the range of large deformation in which load has the nonlinear relation with deformation. In addition, they have characteristics of nonlinearity, incompressibility, in large scale. On account of such characteristics, there are many difficulties in design and production using these materials. In this study, the load-deformation relation obtained from tension and compression tests was applied to finite element analysis in order to design waterproof connectors for automobiles. Furthermore, the effectiveness of the finite element analysis was confirmed by comparing the results of analysis with those of performance tests.

• Journal of Digital Contents Society
• /
• v.12 no.4
• /
• pp.511-518
• /
• 2011

One of the most important paradigms in society has recently been a set of efforts to prepare for the future and to protect the environment by saving carbon that occurs in everyday life as well as in the industry. In order to successfully deal with this new paradigm, Korean government has adopted and implemented various policies including the green certification, the development of green technologies and green growth. Many agencies and organizations in both public and private sectors have established plans about the carbon savings and performed a lot of research using IT technology. For example, attempts have been made in Korea to use as electronic documents instead of paper documents using these green IT and mobile devices. This paper proposes a 'Paperless' waiting order count system using QR code and mobile phone as an example of green IT for 'Low carbon and Green growth'.