• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.53-58
• /
• 2017

UFMC is known as the one among novel multi-carrier modulation techniques which are designed for replacing OFDM for 5G wireless communication systems. It is the generalized model of OFDM and FBMC, which combines the advantages of OFDM and FBMC and avoids their weak points. UFMC is more robust in synchronization condition like Time-frequency misalignment compared to CP-OFDM. Moreover UFMC is more proper to burst uplink transmission like M2M 5G Communications. In this paper we analyze the BER performance in various channels and speeds. The simulation result shows that the BER performance is lowered when mobile devices are moving fast and the BER performance is so sensitive for the good channel environment.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.89-100
• /
• 1997

This paper investigated a new type of low voltage threshold switch (LVTS). As distinguished from the many other types of electronic threshold switches, the LvTS is ; voltage controlled, occurs at low voltages ($V_{2}$ $O_{5}$lV devices. The average low threshold voltage < $V_{LVT}$>=218 mV (standard deviation =24mV~kT/q, where T=300K), and was independent of the device area (x100) and amorphous oxide occurred in an ~22.angs. thick interphase of the V/amorphous- $V_{2}$ $O_{5}$ contacts. At $V_{LVT}$ there was a transition from an initially low conductance (OFF) state into a succession of quantized states of higher conductance (ON). The OFF state was spatically homogeneous and dominated by tunneling into the interphase. The ON state conductances were consistent with the quantized conductances of ballistic transport through a one dimensional, quantum point contact. The temeprature dependence of $V_{LVT}$, and fit of the material parameters (dielectric function, barrier energy, conductivity) to the data, showed that transport in the OFF and ON states occurred in an interphase with the characteristics of, respectively, semiconducting and metallic V $O_{2}$. The experimental results suggest that the LVTS is likely to be observed in interphases produced by a critical event associated with an inelastic transfer of energy.rgy.y.rgy.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1803-1810
• /
• 2018

Recently, many researches related to IoT (Internet of Things) have been actively conducted. In order to improve the context aware function of smart wearable devices using the IoT, we proposed a noise reduction method for the event data of the sensor part. In thisstudy, the adoption of the low - pass filter induces the attenuation of the abnormally measured value, and the benefit was obtained from the situation recognition using the event data of the sensor. As a result, we have validated attenuation for abnormal or excessive noise using event data detected and reported by 3-axis acceleration sensors on some devices, such as smartphones and smart watches. In addition, various pattern data necessary for real - time context aware were obtained through noise pattern analysis.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.23-29
• /
• 2020

These days, digital forensic technologies are being used frequently at crime scenes. There are various electronic devices at the scene of the crime, and digital forensic results of these devices are used as important evidence. In particular, the user's action and the time when the action took place are critical. But there are many limitations for use in real forensics analyses because of the short cycle in which user actions are recorded. This paper proposed an efficient method for recovering deleted user behavior records and applying them to forensics investigations, then the proposed method is compared with previous methods. Although there are difference in recovery result depending on the storage, the results have been identified that the amount of user history data is increased from a minimum of 6% to a maximum of 539% when recovered user behavior was utilized to forensics investigation.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.719-728
• /
• 2015

This paper presents the results of field tests on Voltage Management System (VMS) using hybrid voltage control, which utilizes coordinated controls of various reactive power resources such as generators, FACTS and switched shunt devices to regulate the pilot bus voltage in a voltage control area. It also includes the results of performance test on RTDS-based test bed in order to validate the VMS before installing it in Jeju power system. The main purpose of the system is adequately to regulate the reactive power reserve of key generators in a normal condition with coordination of discrete shunt devices such as condensers and reactors so that the reserves can avoid voltage collapse in emergency state in Jeju system. Field tests in the automatic mode of VMS operation are included in steady-states and transient states. Finally, by the successful operation of VMS in Jeju power system, the VMS is proved to effectively control system voltage profiles in steady-state condition, increase system MVAR reserves and improve system reliability for pre- and post-contingency.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.430-435
• /
• 2018

In this paper, an improved decoding scheme for low-complexity parity-check(LCPC) code with small code length is proposed. The LCPC code is less complex than the turbo code or low density parity check(LDPC) code and requires less memory, making it suitable for communication between internet-of-things(IoT) devices. The IoT devices are required to have low complexity due to limited energy and have a low end-to-end delay time. In addition, since the packet length to be transmitted is small and the signal processing capability of the IoT terminal is small, the LCPC coding system should be as simple as possible. The LCPC code can correct all single errors and correct some of the two errors. In this paper, the proposed decoding scheme improves the bit error rate(BER) performance without increasing the complexity by correcting both errors using the soft value of the modulator output stage. As a result of the simulation using the proposed decoding scheme, the code gain of about 1.1 [dB] was obtained at the bit error rate of $10^{-5}$ compared with the existing decoding method.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.33-42
• /
• 2011

In this paper we designed and implemented a wireless communication circuit which can control the remote devices integrating RFID and ZigBee. This system unifies transmit part and receive part. And this system recognizes RFID tag data, then the recognized information is controlled by MCU, and transmitted to a remote device through the ZigBee. This is operated on TinyOS. If this system is applied to a entrance security system, it can permit/deny one's entrance as well as control the personal computer or other electronic devices. Our experiment shows the result of the recognized data transmission is very different according to a opened playground and a closed place. The data transmission time is stable in the indoor and the data transmission distance is long in the outdoor. We anticipate that our system be applied the various office oriented domains by connecting to the Wired LAN or the WLAN of IEEE 802.11x category.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.287-295
• /
• 2005

For a quick and easy way of writing Hangul in hand-held devices, we analyzed the combination rules of Hangul alphabets that we constructed a small set of Hangul alphabets that combines a whole set of Hangul alphabets. Hangul consonants are generated from base set of consonants with function keys and vowels are constructed from eight base set of vowels by combination rules and stroke-adding rules. Especially, we adopted an easy error-correction method to resolve the inconvenience of using a delete key for vowel harmony errors. Futhermore, we diversified the input method of diphthongs for user-friendliness by minimizing the efforts of teaming vowel combination rules. We compared our method with previous methods of 'Chon-Ji-In' and 'Na-Rat-Keul' that the proposed method is better than the previous methods in input speed and error correction functionality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.370.1-370.1
• /
• 2014

Giant magnetoresistance (GMR), tunneling magnetoresistance (TMR), and magnetic random-access memory (MRAM) are currently active areas of research. Magnetite, Fe3O4, is predicted to possess as half-metallic nature, ~100% spin polarization (P), and has a high Curie temperature (TC~850 K). On the other hand, Spinel ferrite CoFe2O4 has been widely studies for various applications such as magnetorestrictive sensors, microwave devices, biomolecular drug delivery, and electronic devices, due to its large magnetocrystalline anisotropy, chemical stability, and unique nonlinear spin-wave properties. Here we have investigated the magneto-transport properties of epitaxial CoxFe3-xO4 thin films. The epitaxial CoxFe3-xO4 (x=0; 0.4; 0.6; 1) thin films were successfully grown on MgO (100) substrate by molecular beam epitaxy (MBE). The quality of the films during growth was monitored by reflection high electron energy diffraction (RHEED). From temperature dependent resistivity measurement, we observed that the Werwey transition (1st order metal-insulator transition) temperature increased with increasing x and the resistivity of film also increased with the increasing x up to $1.6{\Omega}-cm$ for x=1. The magnetoresistance (MR) was measured with magnetic field applied perpendicular to film. A negative transverse MR was disappeared with x=0.6 and 1. Anomalous Hall data will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.95-95
• /
• 2014

An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.