• Transactions on Electrical and Electronic Materials
• /
• 제4권1호
• /
• pp.11-14
• /
• 2003

The regularities of immobilization of natural medicinal substances - alchidine on gels of poly(vinyl alcohol) - are investigated. It is shown that the polymer components of alchidine interact with nonionic polymer with formation of interpolymer complexes. The influence of the different factors on the properties of complexes is considered and the constants of alchidine distribution in the system gel - water are calculated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.464-467
• /
• 2005

In this paper, we present techniques to manufacture color electronic ink for multi-color electrophoretic display implementation. The charged color pigments have been prepared to have superior affinity for dielectric fluid. White $TiO_2$ nanoparticles were modified with poly(methyl methacrylate) copolymer for a microencapsulated electrophoretic display system, in order to reduce the density mismatch between nanoparticles and dielectric medium. These color balls and white pigment particle suspensions were microencapsulated through the typical microencapsulation technique. We fabricate the microcapsules to the single layer on flexible ITO substrate to test the multi-color electrophoretic display application.

• 한국자기공명학회논문지
• /
• 제15권1호
• /
• pp.14-24
• /
• 2011

We have performed Liquid Chromatography-Solid Phase Extraction-NMR (LC-SPE-NMR) analysis for liquid crystalline mixture and elucidated the structures of selected components by NMR spectra. Combining the results of one-dimensional 1H experiments as well as homonuclear and heteronuclear two-dimensional experiments, we could analyze the molecular structure of the liquid crystal singles whose structure had not been interpretable by mass spectrometry alone.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권1호
• /
• pp.37-45
• /
• 2009

Recently mechanical watt-hour meters are being replaced by electronic watt-hour meters. The replacement period of mechanical watt-hour meters is 7 years. This period is based on long term historical data. The replacement period of electronic watt-meters is also 7 years. This period is determined using the replacement period of mechanical watt-hour meters. However lifetime of mechanical watt-hour meters is different from the lifetime of electronic meters. In order to determine desirable replacement period of electronic watt-hour meters, accelerated life tests of major components in electronic watt-hour meters were performed. The test results showed that LCD was the component which had the shortest lifetime. In this paper, lifetime of electronic watt-hour meters manufactured by 3 company was estimated and life test standard for LCD was developed.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.46-54
• /
• 2003

The thermal response of electronic assemblies during forced convection-infrared reflow soldering is studied. Soldering for attaching electronic components to printed circuit boards is performed in a process oven that is equipped with porous panel heaters, through which air is injected in order to dampen temperature fluctuations in the oven which can be established by thermal buoyancy forces. Forced convection-infrared reflow soldering process with air injection is simulated using a 2-dimensional numerical model. The multimode heat transfer within the reflow oven as well as within the electronic assembly is simulated. Parametric study is also performed to study the effects of various conditions such as conveyor speed, blowing velocity, and electronic assembly emissivity on the thermal response of electronic assemblies. The results of this study can be used in the process oven design and selecting the oven operating conditions to ensure proper solder melting and solidification.

• Investigative Magnetic Resonance Imaging
• /
• 제21권1호
• /
• pp.1-8
• /
• 2017

Purpose: To investigate the exchange and redistribution of hyperpolarized $^{13}C$ metabolites between different pools by temporally analyzing the relative fraction of dual $T_2{^*}$ components of hyperpolarized $^{13}C$ metabolites. Materials and Methods: A dual exponential decay analysis of $T_2{^*}$ is performed for [1-$^{13}C$] pyruvate and [1-$^{13}C$] lactate using nonspatially resolved dynamic $^{13}C$ MR spectroscopy from mice brains with tumors (n = 3) and without (n = 4) tumors. The values of shorter and longer $T_2{^*}$ components are explored when fitted from averaged spectrum and temporal variations of their fractions. Results: The $T_2{^*}$ values were not significantly different between the tumor and control groups, but the fraction of longer $T_2{^*}$ [1-$^{13}C$] lactate components was more than 10% in the tumor group over that of the controls (P < 0.1). The fraction of shorter $T_2{^*}$ components of [1-$^{13}C$] pyruvate showed an increasing tendency while that of the [1-$^{13}C$] lactate was decreasing over time. The slopes of the changing fraction were steeper for the tumor group than the controls, especially for lactate (P < 0.01). In both pyruvate and lactate, the fraction of the shorter $T_2{^*}$ component was always greater than the longer $T_2{^*}$ component over time. Conclusion: The exchange and redistribution of pyruvate and lactate between different pools was investigated by dual component analysis of the free induction decay signal from hyperpolarized $^{13}C$ experiments. Tumor and control groups showed differences in their fractions rather than the values of longer and shorter $T_2{^*}$ components. Fraction changing dynamics may provide an aspect for extravasation and membrane transport of pyruvate and lactate, and will be useful to determine the appropriate time window for acquisition of hyperpolarized $^{13}C$ images.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.69-77
• /
• 2024

최근 전자기기의 소형화, 다기능화 등으로 인한 전자부품 실장 영역의 한계치를 극복하고 플라스틱 사출물에 직접 회로를 인쇄하고 소자 및 부품을 실장하는 molded interconnect device (MID) 형태의 패키징 기법이 도입되고 있다. 다만 열 안정성이 낮은 플라스틱 사출물을 사용하는 경우, 종래의 리플로우 공정을 통한 부품 실장에 어려움이 있다. 본 연구에서는 특정 부위 혹은 소재만을 가열할 수 있는 유도가열 현상을 이용하여 플라스틱에 어떠한 열 데미지 없이 솔더를 용융시켜 실장하는 공정을 개발하였다. 가열하고자 하는 부위에 자속을 집중시킬 수 있는 유도가열용 Cu 코일 형상을 설계하고, 유한요소해석을 통해 패드부 자속 집중 및 가열 정도를 검증하였다. Polycarbonate 기판 위에 실장공정 검증을 위한 LED, capacitor, resistor, connector를 각각 유도가열을 통해 실장하고 작동여부를 확인하였다. 본 연구를 통해 리플로우 공법의 한계를 극복가능한 자기유도를 통한 선택적 가열 공정의 적용 가능성을 제시하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권4호
• /
• pp.154-158
• /
• 2005

Organic molecules have many properties that make them attractive for electronic applications. We have been examining the progress of memory cell by using molecular-scale switch to give an example of the application using both nano scale components and Si-technology. In this study, molecular electronic devices were fabricated with amino style derivatives as redox-active component. This molecule is amphiphilic to allow monolayer formation by the Langmuir-Blodgett (LB) method and then this LB monolayer is inserted between two metal electrodes. According to the current-voltage (I-V) characteristics, it was found that the devices show remarkable hysteresis behavior and can be used as memory devices at ambient conditions, when aluminum oxide layer was existed on bottom electrode. The diode-like characteristics were measured only, when Pt layer was existed as bottom electrode. It was also found that this metal layer interacts with organic molecules and acts as a protecting layer, when thin Ti layer was inserted between the organic molecular layer and Al top electrode. These electrical properties of the devices may be applicable to active components for the memory and/or logic gates in the future.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.138-144
• /
• 2021

전자부품 조립사업은 제품불량이 발생했을 때, 입고된 원자재불량 또는 작업불량을 추적하는 것이 중요하며, 결과에 따라 납품업체 또는 작업현장 개선이 중요하다. 스마트팩토리의 핵심 과제는 데이터 통합허브를 구축하여 저장·관리·분석을 실시간으로 처리하고 클러스터공정, 에너지, 환경, 안전을 통합관리 하는 것이다. 전자부품 관련 중소기업에 생산현장관리를 실시간 모니터링하여 생산데이터의 정확한 분석과 수집으로 신뢰도를 향상시키기 위해서는 스마트팩토리 구축이 필수적이다. 본 논문은 스마트팩토리를 도입하고자 하는 전자 부품관련 중소기업의 특성을 고려해 시스템 구성방법, 스마트팩토리 관련기술 과 적용사례 등을 정의하여 구축에 활용토록 개발되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1794-1797
• /
• 2003

We developed a web-based virtual laboratory system for electronic circuit experiments on the client/ server distributed environment. Through our virtual laboratory, the learners will be capable of learning the concepts and theories related to electronic circuit experiments and how to operate the experimental equipments such as multimeters, function generators, digital oscilloscopes and DC power suppliers. The proposed virtual laboratory system is composed of four important components: Principle Classroom to explain the concepts and theories of electronic circuit operations, Virtual Experiment Classroom to provide interactive multimedia contents about the syllabus of off-line laboratory class, Assessment Classroom, and Management System. With the aid of the Management System every classroom is organically tied together collaborating to achieve maximum learning efficiency. We have obtained several affirmative effects such as high learning standard, reducing the total experimental hours and the damage rate for experimental equipments.