• The korean journal of orthodontics
• /
• 제52권4호
• /
• pp.268-277
• /
• 2022

Objective: Poor experience with Invisalign treatment affects patient compliance and, thus, treatment outcome. Knowing the potential discomfort level in advance can help orthodontists better prepare the patient to overcome the difficult stage. This study aimed to construct artificial neural networks (ANNs) to predict patient experience in the early stages of Invisalign treatment. Methods: In total, 196 patients were enrolled. Data collection included questionnaires on pain, anxiety, and quality of life (QoL). A four-layer fully connected multilayer perception with three backpropagations was constructed to predict patient experience of the treatment. The input data comprised 17 clinical features. The partial derivative method was used to calculate the relative contributions of each input in the ANNs. Results: The predictive success rates for pain, anxiety, and QoL were 87.7%, 93.4%, and 92.4%, respectively. ANNs for predicting pain, anxiety, and QoL yielded areas under the curve of 0.963, 0.992, and 0.982, respectively. The number of teeth with lingual attachments was the most important factor affecting the outcome of negative experience, followed by the number of lingual buttons and upper incisors with attachments. Conclusions: The constructed ANNs in this preliminary study show good accuracy in predicting patient experience (i.e., pain, anxiety, and QoL) of Invisalign treatment. Artificial intelligence system developed for predicting patient comfort has potential for clinical application to enhance patient compliance.

• Journal of the Korean Society for Library and Information Science
• /
• 제57권3호
• /
• pp.279-301
• /
• 2023

The data-driven research environment is rapidly changing. Accordingly, domestic university libraries are also preparing to establish and operate research data management services to support university researchers. This study was designed to propose a research data management service to support researchers in science and technology specialized university libraries. In order to propose the service, 11 universities specializing in science and technology were selected from overseas and domestic universities and their research data management services were analyzed. Key categories were derived from analysis results, research data management, electronic research notebooks, and RDM training. In particular, the 'research data management' category included DMP, data collection, data management, data preservation, data sharing and publishing, data reuse, infrastructure and tools. And it consists of RDM guides and policies. The results of this study will be helpful in introducing and operating research data management services in science and technology specialized university libraries.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• 제36권3호
• /
• pp.74-98
• /
• 2023

Objectives : This study aims to evaluate the add-on effect of herbal bath combined with acitretin in patients with psoriasis. Methods : We searched randomized controlled trials(RCTs) reporting the effect of herbal bath and acitretin combined treatment for psoriasis in 10 electronic databases from their inception to January 2023. Study collection, data extraction, and risk of bias assessment were performed by two independent researchers. Data synthesis and risk of bias evaluation was conducted using Revman 5.4. Results : Ten RCTs with 1,008 subjects were included. Herbal bath and acitretin combined treatment group showed higher average total effective rate than acitretin alone group(RR 1.39; 95% CI: 1.15-1.68, P=0.0006, I² =0%). Herbal bath and additional treatments such as phototherapy(NB-UVB) and oral herbal medicine, combined with acitretin group also showed higher average total effective rate than acitretin alone group(RR 1.81; 95% CI: 1.47-2.22, P<0.00001, I² =43%). Herbal bath and phototherapy(NB-UVB) combined with acitretin group also showed higher average total effective rate than acitretin alone group(RR 1.51; 95% CI: 1.18-1.93, P=0.0009, I² =0%). The overall risk of bias of the included studies was unclear or of high risks. Conclusions : This review showed that the add-on of herbal bath combined with acitretin treatment could be more effective than acitretin alone treatment in patients with psoriasis. However, because of few included studies, heterogeneity between studies, and insufficient quality of included studies, further well-designed RCTs are needed to confirm the add-on effect of herbal bath on psoriasis.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• 제18권2호
• /
• pp.39-59
• /
• 2007

With the rapid spread of the practice of collecting and treating data by using a data base system, it's increasingly more critical to approach data sets in the same manner as general records in the collection, evaluation, preservation, and utilization process. Despite the importance, however, the interest level in data sets in Korea's records management is very low. In order to suggest basic items to regard data sets as records and manage them systematically, this study examined the descriptive elements of data set records. descriptive elements of data set records were suggested by comparing and analyzing those ones adopted by the agencies that regarded data sets as records and provided the concerned service as well as the descriptive rules of electronic records set by the advanced nations in records management based on the descriptive areas of ISAD(G).

• Imaging Science in Dentistry
• /
• 제53권4호
• /
• pp.335-344
• /
• 2023

Purpose: This bibliometric analysis aimed to provide a comprehensive overview of the characteristics, trends, and level of diagnostic efficacy of studies on cone-beam computed tomography (CBCT) published in Imaging Science in Dentistry (ISD) from 2011 to 2022. Materials and Methods: Publications related to CBCT identified in the electronic collection of ISD were selected according to eligibility criteria by 2 independent reviewers who collected data on the characteristics of the articles (year, authors, and country). The type and topic of studies were analyzed using VOSviewer v.1.6.18 (Centre for Science and Technology Studies, Leiden University, Leiden, Netherlands). The research articles were classified according to the hierarchical scale of diagnostic efficacy. Results: Of the 236 articles included, most were from South Korea and Brazil. Bong-Hae Cho and Yun-Hoa Jung were the most prolific authors on the topic of CBCT. The most frequently published types of studies were cross-sectional and laboratory-based. The most popular topics WERE related to the diagnosis of pathologies and/or alterations, as well as anatomical variations. On the diagnostic efficacy scale, most studies were rated level 1 (technical efficacy) or 2 (diagnostic accuracy efficacy). Conclusion: A steady increase was observed in publications related to CBCT, which are of both clinical and academic interest. The trends in these publications were analyzed, revealing that most are cross-sectional studies primarily exploring the capabilities of CBCT in diagnosing pathologies and/or changes in the oral and maxillofacial complex. These studies were typically classified as level 1 or 2 on the diagnostic efficacy scale.

• Information Systems Review
• /
• 제18권3호
• /
• pp.185-207
• /
• 2016

This study investigated the relationship between privacy policy awareness and willingness to provide personal information. Online privacy policies published on the Internet aim to build the trust of consumers and reduce their concerns about the provision of providing personal information. This study uses FIP(FIP; Fair Information Practices) principles to measure awareness of privacy policy. The result of the survey indicates significant relationships among awareness of privacy policy of e-commerce websites, privacy trust, and privacy risk. Privacy policy aims to improve transparency of collection and use of personal information. A high level of privacy trust is related to a high level of willingness to provide personal information on an e-commerce website. A low level of privacy risk is related to a high level of willingness to provide personal information on an e-commerce website. This study found that disposition to trust moderates the relationship between privacy policy awareness and privacy trust. This study contributes to further research on the relationships among privacy policy awareness, privacy trust, and privacy risk. The result of this study can be used by companies that aim to build privacy trust and reduce privacy risk.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.278-278
• /
• 2009

A photovoltaic device consisting of arrays of radial p-n junction wires enables a decoupling of the requirements for light absorption and carrier extraction into orthogonal spatial directions. Each individual p-n junction wire in the cell is long in the direction of incident light, allowing for effective light absorption, but thin in orthogonal direction, allowing for effective carrier collection. To fabricate radial p-n junction solar cells, p or n-type vertical Si wire cores need to be produced. The majority of Si wires are produced by the vapor-liquid-solid (VLS) method. But contamination of the Si wires by metallic impurities such as Au, which is used for metal catalyst in the VLS technique, results in reduction of conversion efficiency of solar cells. To overcome impurity issue, top-down methods like noble metal catalytic etching is an excellent candidate. We used noble metal catalytic etching methods to make Si wire arrays. The used noble metal is two; Au and Pt. The method is noble metal deposition on photolithographycally defined Si surface by sputtering and then etching in various BOE and $H_2O_2$ solutions. The Si substrates were p-type ($10{\sim}20ohm{\cdot}cm$). The areas that noble metal was not deposited due to photo resist covering were not etched in noble metal catalytic etching. The Si wires of several tens of ${\mu}m$ in height were formed in uncovered areas by photo resist. The side surface of Si wires was very rough. When the distance of Si wires is longer than diameter of that Si nanowires are formed between Si wires. Theses Si nanowires can be removed by immersing the specimen in KOH solution. The optimum noble metal thickness exists for Si wires fabrication. The thicker or the thinner noble metal than the optimum thickness could not show well defined Si wire arrays. The solution composition observed in the highest etching rate was BOE(16.3ml)/$H_2O_2$(0.44M) in Au assisted chemical etching method. The morphology difference was compared between Au and Pt metal assisted chemical etching. The efficiencies of radial p-n junction solar Cells made of the Si wire arrays were also measured.

• Journal of Environmental Science International
• /
• 제27권2호
• /
• pp.91-97
• /
• 2018

This study carried out first a component survey on the domestic waste shipped into a waste disposal facility in B city, and then heavy metal analysis of each component according to the SRF standards. Based on this, this study explored the problems with domestic waste and measures to improve them. The results are as follows. The result of the survey of physical components show that paper accounted for the largest proportion with 20.5 %~59.9 %, metals (including batteries) among incombustibles accounted for 0.0~8.3 %, other inorganic substances, glass and ceramics accounted for 0.0~43.7 % and 0.0 %~19.6 % respectively. However, the proportion of coated viny and plastics, which have high lead and cadmium content, was rather high with 2.9 %~30.9 %. This suggests the possibility that actual concentration of lead and cadmium within SRF is likely to be higher. Among the 15 components contained in the waste brought into the waste disposal facility, 10 components (food waste, textiles, vinyl, plastics, wood, rubber and leather, paper, metals, electronic substrates, and nail polish) were analyzed according to assay samples (approximately 0.1 g and 0.3 g). The result of analysis shows that the amount of Cd and Pb detected in coated vinyl for 0.109 g of assay sample was 98.6 mg/kg and 20.6 mg/kg respectively; 117.0 mg/kg and 29.0 mg/kg respectively for 0.313 g of assay sample. This is high contents exceeding the Cd standard. As for wooden component, the amount of Pb was 480.0 mg/kg for 0.3 g of assay sample. This suggests that there always exists the possibility of exceeding the exposure level of heavy metals (Cd and Pb) in SRF as long as coated wood and vinyl plastics with high contents of Pb and Cd are shipped into the waste disposal facility; and the local government and the residents need to work hard to improve the situation including development of the machine to sort electronic substrates and batteries for separate collection of the waste of coated vinyl and plastics within domestic waste.

• Spatial Information Research
• /
• 제17권3호
• /
• pp.329-339
• /
• 2009

A historical and cultural map needs an overall reflection of the links based on time and space among the various composite factors, instead of requiring a simple collection of the respective relics in a particular region. The study of history, culture and living environment of river system area, a place that is known to as a cradle of civilization, will be able to undertake a role in the research and comparison with other cultural regions, reaching beyond the regional units until now and moreover investigation the international and intercontinental history of civilization. In this context, this research focuses on the establishment of a cultural information system for the public use and the insight to the regional identity and materialization of culture based on Korea's peculiar history and culture. Thus, the information system for Youngsan River area aims to create a form of electronic map that contains various cultural and historical information on river system area, which is a integrated information system based on Web GIS that is open to public use through the internet. The above mentioned system is a combined product from the basic research data on various fields of study, including archaeology, architecture, arts, ecological environment, history, folk customs, literature, and food, while it aims for not only its utilization in interdisciplinary studies but also creating new value as a public database. As a result, the expected effects due to the establishment of historical and cultural information system based on Web GIS of Youngsan River area are as follows: First, the study can contribute to verify a road map of the study on Youngsan River area. Second, it will take a role to stimulate the academical research on the dynamic structure and characteristics of the Youngsan River area. Third, we can also expect an effect of gaining a full foothold in providing an electronic academic source specialized for the study of the historical and cultural map.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.329-329
• /
• 2007

Photoconductive poly crystalline lead oxide coated on amorphous thin film transistor (TFT) arrays is the best candidate for direct digital x-ray detector for medical imaging. Thicker films with lessening density often show lower x-ray induced charge generation and collection becomes less efficient. In this work, we present a new methodology used for the high density deposition of PbO. We investigate the structural properties of the films using X-ray diffraction and electron microscopy experiments. The film coatings of approximately $200\;{\mu}m$ thickness were deposited on $2"{\times}2"$ conductive-coated glass substrates for measurements of dark current and x-ray sensitivity. The lead oxide (PbO) films of $200\;{\mu}m$ thickness were deposited on glass substrates using a wet coating process in room temperature. The influence of post-deposition annealing on the characteristics of the lead oxide films was investigated in detail. X-ray diffraction and scanning electron microscopy, and atomic force microscopy have been employed to obtain information on the morphology and crystallization of the films. Also we measured dark current, x-ray sensitivity and linearity for investigation of the electrical characteristics of films. It was found that the annealing conditions strongly affect the electrical properties of the films. The x-ray induced output charges of films annealed in oxygen gas increases dramatically with increasing annealing temperatures up to $500^{\circ}C$ but then drops for higher temperature anneals. Consequently, the more we increase the annealing temperatures, the better density and film quality of the lead oxide. Analysis of this data suggests that incorporation and decomposition reactions of oxygen can be controlled to change the detection properties of the lead oxide film significantly. Post-deposition thermal annealing is also used for densely film. The PbO films that are grown by new methodology exhibit good morphology of high density structure and provide less than $10\;pA/mm^2$ dark currents as they show saturation in gain (at approximate fields of $4\;V/{\mu}m$). The ability to operate at low voltage gives adequate dark currents for most applications and allows voltage electronics designs.