• The Research Journal of the Costume Culture
• /
• v.20 no.6
• /
• pp.937-941
• /
• 2012

Based on the literature on customer's repeat purchase intention, customer's repeat purchase intention was explored, customer's repeat purchase intention has been a crucial factor influencing consumer behaviors, In this research, the development of models on repeat purchase intention repurchase was indicated. Based on the electronic commerce platform, we focus on the customer's repeat purchase intention on silk products, This paper mainly explores the e-commerce purchase frequency (EPF), customer perceived value (CPV), perceived risk of e-commerce (EPR), and customer satisfaction (CS). The influence of the four factors on repeat purchase intention (RPI) is investigated. In the results, we found that CPV and CS have positive correlations with repeat purchase intention, The EPR has a negative correlation with RPI and has no significant influence on RPI. The result can provide meaningful suggestions for silk product retailers.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.504-508
• /
• 2004

An EMC analysis of a switched mode power supply (SMPS) have been usually using unbalance circuit topologies and the major factor of disturbance is parasitic capacitance. We have proposed a balanced switching converter circuit, which is an effective way to reduce the common mode conducted noise. In this paper presents the relationship between common mode current and radiated field.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.517-522
• /
• 2011

Conventional projection welding systems suffer from lots of defective products caused by manual handling. In this paper, we introduce a projection welding system that performs automatic identification, welding and counting of components and products. The proposed system checks the existence and identifies placement of components to be welded by a vision camera. After welding of the components, it automatically updates product counts and dressing items. We show that the proposed welding system can reduce the defect rate and improve the productivity through experimental test with a existing system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.418-426
• /
• 2020

This study tested the electrical, structural, and thermal safety of LED lighting products, available on the market. Five recessed LED systems, 20 W each, and five fixed LED systems, 25 W each, were selected. Dielectric strength tests, live part electric shock protection tests, and thermal tests were conducted on the LEDs. These were key tests for user safety, according to the specification of the safety criteria for electric products, KC 60598-1, South Korea. In addition, the wiring temperature of UL1007, 60227 IEC 08, and UTP cables, was measured. The results of the study gave an in-depth examination of the safety of LED lighting systems for users.

• The Korean Journal of Community Living Science
• /
• v.27 no.2
• /
• pp.305-318
• /
• 2016

This study was conducted to investigate the effects of service quality and food quality on purchase intention in the electronic commerce of food products. Specifically, the relationship between purchase intention and food quality and service quality was tested based on customer satisfaction and trust, which were measured using the structural equation modeling method. Quality of service was found to affect purchase intention; however, food quality had no positive effects on purchase. Additional analyses should be conducted owing to the conflicting results of the present study. Although the amount of food bought online is increasing rapidly every year, research regarding online food purchasing is not being actively conducted. The results of the present study will help food sellers, buyers, and researchers.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.76-78
• /
• 2000

The previous MCC's have the demerits of high cost and much manhour for rework because they are impossible for the standardization of products and have many manual connections. The customers require the products which can operate in connection with SCADA system by digitalizing the functions of the current MCC's and are systematized with capability of remote control. To solve these disadvantages and requirements, we developed the Electronic Motor Control System according to starting type for applying to fields based on this. This system has the various functions such as protection, measurement, and communication. Using these functions, it can monitor motor status through communication with the upper system and define the circuit for lower connection cost according to starting type and shorter manufacture period by program. The development of this product results in establishment of competitive structure with domestic competition and perfect automatic monitoring through linkage with SCADA system. In addition, it provides the comparable dominancy of receiving on orders in switch gear and adaptability to change of MCC market in Japan and Europe.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1270-1273
• /
• 2004

The combination of methane-chemical activation and Self-propagating High-temperature synthesis (SHS) has widened the possibilities for both methods. For YBCO systems the investigation showed that a short-term mechano-chemical activation of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors of YBCO composition with a grain size d < $1{\mu}m$ is developed. The specific feature of the technique is formation of the $YBa_2Cu_3O_{7-x}$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors (HTS) are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.177-182
• /
• 2004

Electronic products are subjected to many different types of shock environment. As the Optical Disc Drive (ODD) market grows, the number of failures related to shock increases. Therefore, it is necessary to improve the performance of cushion package as well as the product design. Cushion materials such as expanded polystyrene are often used to protect electronic products from shock environment. In this paper, the drop analysis of the cushion package f3r optical disc drives was carried out with the explicit method of LS-DYNA and verified by the drop test. For the optimization of package, response surface approximation model was created using central composite design. As a result, cushioning performance was improved under the critical condition and practical design guidelines of cushion package were suggested.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.190-197
• /
• 2006

China has been aware of the urgent need of developing electronic and information industry in order to improve its productivity. Since 1991, IT industry has been one of the main factors to influence China's economic growth. In the results of the efforts to develop its IT industry, China has achieved average 25% yearly growth rate of IT manufacturing industry since 1991. We will take a look at haw the main IT products' performances was, how the role of IT industry was in China economy and in China's trade and how the prospect of China IT industry will be. However, we need to know that, depending an the different areas, the environment of the China's IT industry will be quite different. In China, the east coastal area has the better environment of technology, menpower, infrastructure, and fund for the development of IT industry and the IT industry of this area is very competitive, comparing with the middle and west area.

• Design & Manufacturing
• /
• v.2 no.3
• /
• pp.45-50
• /
• 2008

In the electronic products, connector which play a role of board-to-board connection is an essential part. The manufacture process of this connector involves slitting and bending stage. Recently, manufacturing the connector is becoming more and more difficult as miniaturization of the electronic products. In this study, FEM analysis was performed on slitting and bending process for connector terminal with micro width in order to predict the cause of inaccurate dimension of connector terminal which occurs in actual industrial spot.