• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.326-326
• /
• 2014

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states [1-3]. We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.2
• /
• pp.37-41
• /
• 2001

Photo catalytic characteristics of nano-sized TiO$_2$ powder with rutile phase produced using homogeneous precipitation process at low temperatures (HPPLT) were compared with those of commercial P-25 powder by Degussa Co. The TiO$_2$ powder by HPPLT showed very higher photoactivity in the removal rate, showing lower pH values in the solution, than the P-25 powder when eliminating metal ions such as Pb and Cu from aqueous metal-EDTA solutions. This can be inferred the more rapid photo-oxidation or -reduction of metal ions from the aqueous solution, together with relatively higher efficiencies in the use of electron-hole pair formed on the surface of TiO$_2$ particle, under UV light irradiation. Also, in the view of the TiO$_2$ particle morphology, compared to the well-dispersed spherical P-25 particle, the agglomerated TiO$_2$ particle by HPPL T consists of acicular typed primary particle with the thickness ranged of 3∼7 nm, which would be more effective to the photocatalytic reactions without electron-hole recombination on the surface of the TiO$_2$ particle under the UV light irradiation. It is, therefore, thought that the higher photo activity of the rutile TiO$_2$ powder by HPPLT in the aqueous solutions resulted from having its higher specific surface area as well as acicular shape primary particle with very thin thickness.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.1-5
• /
• 2001

This study presents an electronic catalogue based cutting parameter selection system using MS Access software. The proposed system has been designed to electronically select proper cutting conditions based on the stored data base. The existing approaches used in most small and medium sized companies are basically to use manufacturing engineer's experience or to find the recommended values from the manufacturing engineer handbook. These processes are often time consuming and inconsistent, especially when a new engineer is involved. Therefore, this study proposes a simple, yet quick and consistent electronic catalogue based cutting parameter selection method which uses MS Access in terms of programming and database implementation. Consequently, the proposed system could automatically generate the proper cutting conditions (feed, depth of cut, and cutting speed) as soon as the input data (proper information about the tool and work material) is given. Thanks to the simple structure and popularity of the MS Access, the engineer could be quickly accustomed to the system and easily modify/insert/delete the database if necessary.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.4
• /
• pp.1-6
• /
• 2000

The mechanical strength of silicon carbide dose nor permit the use of diffusion as a means to achieve selective doping as required by most electronic devices. While epitaxial layers may be doped during growth, ion implantation is needed to define such regions as drain and source wells, junction isolation regions, and so on. Ion activation without an annealing cap results in serious crystal damage as these activation processes must be carried out at temperatures on the order of 1600$^{\circ}C$. Ion implanted silicon carbide that is annealed in either a vacuum or argon environment usually results in a surface morphology that is highly irregular due to the out diffusion of Si atoms. We have developed and report a successful process of using silicon overpressure, provided by silane in a CAD reactor during the anneal, to prevent the destruction of the silicon carbide surface, This process has proved to be robust and has resulted in ion activation at a annealing temperature of 1600$^{\circ}C$ without degradation of the crystal surface as determined by AFM and RBS. In addition XPS was used to look at the surface and near surface chemical states for annealing temperatures of up to 1700$^{\circ}C$. The surface and near surface regions to approximately 6 nm in depth was observed to contain no free silicon or other impurities thus indicating that the process developed results in an atomically clean SiC surface and near surface region within the detection limits of the instrument(${\pm}$1 at %).

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.15.1-15.18
• /
• 2022

This review aimed to characterize the effect of direct restorative material types and adhesive protocols on marginal adaptation and the bond strength of the interface between the material and the proximal dentin/cementum. An electronic search of 3 databases (the National Library of Medicine [MEDLINE/PubMed], Scopus, and ScienceDirect) was conducted. Studies were included if they evaluated marginal adaptation or bond strength tests for proximal restorations under the cementoenamel junction. Only 16 studies met the inclusion criteria and were included in this review. These studies presented a high degree of heterogeneity in terms of the materials used and the methodologies and evaluation criteria of each test; therefore, only a descriptive analysis could be conducted. The included studies were individually evaluated for the risk of bias following predetermined criteria. To summarize the results of the included studies, the type of restorative material affected the test results, whereas the use of different adhesive protocols had an insignificant effect on the results. It could be concluded that various categories of resin-based composites could be a suitable choice for clinicians to elevate proximal dentin/cementum margins, rather than the open sandwich technique with resin-modified glass ionomers. Despite challenges in bonding to proximal dentin/cementum margins, different adhesive protocols provided comparable outcomes.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.23
• /
• pp.155-219
• /
• 2004

This paper focuses on two recent legislative developments in electronic commerce: the "Uniform Computer Information Transactions Act" ("UCITA") of USA and the "preliminary draft convention on the use of data message in [international trade] [the context of international contracts]" ("preliminary draft Convention") of UNCITRAL. UCITA provides rules contracts for computer information transactions. UCITA supplies modified contract formation rules adapted to permit and to facilitate electronic contracting. UCITA also adjusts commonly recognized warranties as appropriate for computer information transactions; for example, to recognize the international context in connection with protection against infringement and misappropriation, and First Amendment considerations involved with informational content. Furthermore, UCITA adapts traditional rules as to what is acceptable performance to the context of computer information transactions, including providing rules for the protection of the parties concerning the electronic regulation of performance to clarify that the appropriate general rule is one of material breach with respect to cancellation (rather than so-called perfect tender). UCITA also supplies guidance in the case of certain specialized types of contracts, e.g., access contracts and for termination of contracts. While for the most part carrying over the familiar rules of Article 2 concerning breach when appropriate in the context of the tangible medium on which the information is fixed, but also adapting common law rules and rules from Article 2 on waiver, cure, assurance and anticipatory breach to the context of computer information transactions, UCITA provides a remedy structure somewhat modeled on that of Article 2 but adapted in significant respects to the different context of a computer information transaction. For example, UCITA contains very important limitations on the generally recognized common law right of self-help as applicable in the electronic context. The UNCITRAL's preliminary draft Convention applies to the use of data messages in connection with an existing or contemplated contract between parties whose places of business are in different States. Nothing in the Convention affects the application of any rule of law that may require the parties to disclose their identities, places of business or other information, or relieves a party from the legal consequences of making inaccurate or false statements in that regard. Likewise, nothing in the Convention requires a contract or any other communication, declaration, demand, notice or request that the parties are required to make or choose to make in connection with an existing or contemplated contract to be made or evidenced in any particular form. Under the Convention, a communication, declaration, demand, notice or request that the parties are required to make or choose to make in connection with an existing or contemplated contract, including an offer and the acceptance of an offer, is conveyed by means of data messages. Also, the Convention provides for use of automated information systems for contract formation: a contract formed by the interaction of an automated information system and a person, or by the interaction of automated information systems, shall not be denied on the sole ground that no person reviewed each of the individual actions carried out by such systems or the resulting agreement. Further, the Convention provides that, unless otherwise agreed by the parties, a contract concluded by a person that accesses an automated information system of another party has no legal effect and is not enforceable if the person made an error in a data message and (a) the automated information system did not provide the person with an opportunity to prevent or correct the error; (b) the person notifies the other party of the error as soon as practicable when the person making the error learns of it and indicates that he or she made an error in the data message; (c) The person takes reasonable steps, including steps that conform to the other party's instructions, to return the goods or services received, if any, as a result of the error or, if instructed to do so, to destroy such goods or services.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1387-1394
• /
• 2014

In a photoelastic experiment, it is necessary to know the material stress fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant can be obtained using a simple tension specimen and/or a circular disk under diametric compression. In these methods, there is generally a need to apply numerous loads to the specimen in response to the relationship of the fringe order. Then, the least squares method is used to obtain the material constant. In this paper, the fringe orders that appear on a four-point bending specimen are used to determine the fringe constant. This method requires four photoelastic fringes obtained from a circular polariscope by rotating the analyzer to 0, ${\pi}/4$, ${\pi}/2$, and $3{\pi}/4$ radians. Using the four-point bending specimen to determine the material stress fringe constant has an advantage because measurements can be made at different locations by applying a constant load. The stress fringe constant measured with this method is within the range suggested by the manufacturer of the photoelastic material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.304-304
• /
• 2006

One method of Electric Power Generation is to use piezoelectric materials, which form transducers that are able to interchange electrical energy and mechanical force or strain. This study describes the fabrication and properties of piezoelectric transducers for Power Generation application. The structure of the transducers was ceramic-metal-ceramic 3-layered parallel type The center metal layer of phosphorous bronze was bonded by two piezoelectric layers of which have sputtered Ag/Cu(or Ni/Cu) electrode layers on both sides.. The Energy generated by the vibration of piezoelectric transducers Can be achieved by adjusting a suitable piezoelectric constant and mechanical structures. The piezoelectric material used in this application showed the electrical properties of r=4400, $d_{33}\;=\;750\;(10^{-12}\;m/V)$, $d_{31}\;=\;-300\;(10^{-12}\;m/V)$, $k_{33}\;=\;71%$, $Qm\;=\;85$, $T_c\;=\;210^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.351-361
• /
• 2023

The purpose of this paper is to help those who research and develop solar cells in university laboratories and industrial sites understand the most basic and important quantum efficiency measurement and analysis method in analyzing solar cell performance. Starting with the definition of quantum efficiency, we calculate the theoretical current density according to the band gap of the solar cell material from the solar spectrum, along with a detailed introduction to the measurement and analysis methods, and measure and analyze the theoretical current density and quantum efficiency. We discuss in depth how to analyze the performance of solar cells through Quantum efficiency measurement and analysis of solar cells is a very useful method that can give intuition to solar cell performance analysis as it can analyze solar cells according to depth (front emitter, bulk, rear surface). Students and researchers who study solar cells with a deep understanding of theoretical current density and quantum efficiency measurement analysis are expected to use it as a basis for analyzing solar cell performance.

• Journal of the Korean Society of Costume
• /
• v.50 no.4
• /
• pp.181-195
• /
• 2000

This study was conducted from Sep., 1999. to Nov., 1999. It researched approximately 60 specialized manufacturers who had homepages on the Internet. Of the 60 manufacturers, 20 of them were chosen for the study all of whom had relatively were made homepages that were geared towards sales. 1. Daily Hanboks on the homepages were put in an electronic catalog. They were photographed and well described. Each picture could be enlarged when needed. 2. The Hanbok's were made for men, women and children. There were every couple's Hanboks. The Hanboks used natural material, mixed spinning and chemical textile, which was easily kept and washed. It was intended, as clothes for everyday wear Silk was used for formal clothes. 3. The prices ranged from low-middle to high clothing for everyday life is reasonable and street wear and formal dresses are priced high. The color of the dresses are not vibrant, but natural and light. As Hanboks become more in demand, there will be more choices available. 4. As matter of the sizes shows weakness. In general they use the western size system. The purpose of this study is to show the direction that Hanbok manufacturers may take for the internet sales and for being more active to promote the spread of the dress. This research came to the fellowing conclusion. Even though Hanbok manufacturers operate homepages. it seems that they are not well used. However, many internet shopping malls have been opened and they have put Daily Hanboks into one of their sales categories. The internet malls are getting more active and are expanding more. Therefore the market value of the Hanboks in the future look optimistic. If smaller sized manufacturers of Daily Hanbok's establish cooperative network that have no time and space limit, they can use the strong power of the market as the market development for Daily Hanboks is endless.