• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.83-84
• /
• 2005

생명체의 근육을 구성하는 근섬유와 마찬가지로 나노선 구동기는 불규칙적으로 엉켜있는 나노선들의 집합으로 이루어져 있으며, 기존의 강유전체에 기반을 둔 구동기에 비해 낮은 구동전압과 높은 일률을 가진다. 대표적인 나노선인 MWCNTs(Multi-walled Carbon Nanotubs)와 $V_2O_5$ 나노선을 이용한 구동기는 이미 각각 시현된 바 있으나, 이 둘의 이종접합을 통한 구동기는 아직까지 보고되지 않았다. 본 연구에서는 탄소나노튜브와 $V_2O_5$의 이종접합을 통해 필름 형태의 구동기를 구현하여 각각의 나노선 만을 이용했을 때보다 월등한 성능을 보여주는 구동기를 구현하였다. 향후 실용화 가능성을 염두에 두어, 보다 강건하고 최적화된 나노선 sheet의 합성과 구동기의 구조적 향상이 이루어진다면 그동안 알려진 그 어떤 물질보다도 우수한 구동특성을 보여줄 것이라 예상된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.4
• /
• pp.325-331
• /
• 2007

In this study, the inter-metal dielectric material of FSG was changed by low-k material in $0.13{\mu}m$ foundry-compatible technology (FCT) device process based on fluorinated silicate glass (FSG). Black diamond (BD) was used as a low-k material with a dielectric constant of 2.95 for optimization and yield-improvement of the low-k based device process. For yield-improvement in low-k based device process, some problems such as photoresist (PR) poisoning, damage of low-k in etch/ash/cleaning process, and chemical mechanical planarization (CMP) delamination must be solved. The PR poisoning was not observed in BD based device. The pressure in CMP process decreased to 2.8 psi to remove the CMP delamination for Cu-CMP and USG-CMP. $H_2O$ ashing process was selected instead of $O_2$ ashing process due to the lowest condition of low-k damage. NE14 cleaning after ashing process lot the removal of organic residues in vias and trenches was employed for wet process instead of dilute HF (DHF) process. The similar-state of SRAM yield was obtained in Cu/low-k process compared with the conventional $0.13{\mu}m$ FCT device by the optimization of these process conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.989-995
• /
• 2000

G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$ is a very promising material for the high-speed device due to the fact that electron and hole mobilities for the strained G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$ are greatly enhanced. Because G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$ has a direct band gap for the proper combination of x and y, it can be applied to the optoelectronic device. Therefore, the study of the electrical property for G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$(001) with a direct energy gap is needed. G $e_{1-x}$ S $n_{x}$ layer can not be grown thickly due to the large difference of lattice constants. This fact prefers the structure of the device where electrons and holes move in the plane direction. The transverse mobilities of electron and hole for G $e_{0.8}$S $n_{0.2}$Ge(001) are 2~3 times larger than those for Ge/Ge/ sub0.8/S $n_{0.2}$(001). Therefore, G $e_{0.8}$S $n_{0.2}$Ge(001) is expected to be better than Ge/G $e_{0.8}$S $n_{0.2}$(001) for the development of the high-speed device.h-speed device.device.h-speed device. device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.69-74
• /
• 2015

Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1113-1122
• /
• 2020

Recently, as violent crimes of crime without reason (Korea : Do not ask), women and the elderly are getting serious. In the existing system, many CCTVs are installed, but it is difficult to prevent crime due to only follow-up measures after a crime occurs. This device prevents crime through this device for incidents in shaded areas and closed spaces such as apartments and buildings. To do this, we research this technology to develop products and software. It sends an alarm signal using communication technology to a specific place where you want to receive an event of an alarm or a CCTV device operated using image analysis big data technology and convergence sensor technology for a specific target of the behavior expected to be a crime or movement. Develop the device. This development device researches and develops this device and supplies low-cost devices to consumers, which is used as a device that predicts the occurrence of crime in advance, processes it as an alarm signal in real time, and transmits it, and constitutes a standalone device and a server. Will provide the device to be connected.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.4
• /
• pp.214-220
• /
• 2007

Recently, most embedded systems have the multi-functions mixed the hardware with the software. The existing sequence programming methods are not suitable to implement the embedded system with multi-functions. So, it can be overcome the limit of a facility implementation by introducing the operating system in system. Also, due to the requirement about the better convenient and comfortable meeting or lecture environment, the necessity of electronic white-board is getting higher. Specially, the education using multimedia information is much more desirable for various and improved lecture at the high school and the university. But the sequence program which have been managed in existing electronic white-board system has some difficulties to achieve the software-oriented systems which has to accomplish many functions. In this paper, we propose the method to implement a facility of electronic white-board through using the embedded linux with excellent performance. The embedded linux presents the powerful software environment for the implementation of an embedded system and makes the realization of many various functions easy because it follows kernel characteristics of linux. In this paper, we describe the details for the structure of hardware, kernel source and device driver of a developed electronic white-board.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.166-169
• /
• 2007

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.989-998
• /
• 2020

Recently, demands for large-capacity electronic loads are increasing in various industries such as a reliability test for the performance of a DC power supply device or a dummy-load for improving the stability of an independent microgrid to be actively built in the future. The electronic load required in these various fields requires an operation such as a continuously variable resistance load while minimizing the switching harmonic component generated in the electric load current in order to reduce the influence of interference from the load peripheral device. Electronic loads require a system that minimizes switching current ripple for load control. Therefore, in this paper, we propose a three-level module converter structure to reduce the current ripple of an electronic load, and a multilevel interleaved power converter topology to reduce the current ripple. The validity of the proposed electronic load, 3-level 6 interleaver converter, was verified by simulation and experiment. In addition, the user's convenience was provided by applying the emotional command curve interface method.

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.51-58
• /
• 2017

This paper proposes a direction estimation scheme with directional speaker and smart device for evacuation guidance. When there is worst disaster environment filled with smoke and noisy sound, evacuee can not get any information about evacuation routes. The proposed scheme can be used for detecting evacuation routes with audible and inaudible signal from directional speaker. At this point, evacuee can get evacuee guidance by using smartphone application that the proposed scheme is applied. The performance of the proposed scheme is evaluated by experiment with three different types of smart devices in large indoor environment. The purpose of experiment is to detect the direction of transmitted signal from directional speaker. Therefore, The experiment is conducted by analyzing the strength of transmitted signal by distance. The experimental results show that even if the smart device is located up to 20m away from the speaker, it is possible to detect the sending direction of the signal. We confirmed the possibility of the proposed technology in 8kHz and 20kHz signal detection by smart device.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.837-840
• /
• 2015

Graphene is a single layer of carbon material which shows very high electron mobility, so many kinds of research on the devices using graphene layer have been performed so far. Graphene material is adequate for high frequency and fast operation devices due to its higher mobility. In this research, the actual graphene layer is evaluated using RT-CVD method which can be available for mass production. The mobility of $7,800cm^2/Vs$ was extracted, that is more than 7 times of that in silicon substrate. The graphene transistor model having no band gap is evaluated using both of pMOS and nMOS based on the measured mobility values. And then the response of graphene transistor model regarding to gate length and width is examined.