• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.156-160
• /
• 2018

In the paper, a kind of self-tuning PID control system is designed to keep the honing coolant temperature constant in the process of automobile engine production. The conventional PID control method and the Fuzzy PID control method both are used to design and make the simulation experiment in Matlab. According to the simulation result, the performance of Fuzzy PID control method is obviously better. The Fuzzy PID control system can react faster to get the target temperature and resume normal when external conditions exchanged.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.4
• /
• pp.166-170
• /
• 2004

In this paper, it has been proposed the simultaneous control of PFC (power factor corrector) and electronic ballast for fluorescent lamp by one chip micro-controller. Boost DC-DC converter is adopted for PFC, and half bridge inverter for electronic ballast. It controls, simultaneously and independently, the boost DC-DC converter and the half bridge inverter. As PFC and electronic ballast are controlled by one chip micro-controller, it is possible to achieve the simpler and the cheaper controller for fluorescent lamp. Experimental results have shown the feasibility of the proposed simultaneous control of PFC and electronic ballast by one chip micro-controller.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.50-52
• /
• 2007

Throttle Control 장치는 차량의 지능화와 연료 절감의 이유로 기계식에서 전기적 신호의 연결로 구동시키는 시스템으로 발전하고 있다. 전기 전자 시스템을 도입한 ETC(Electronic Throttle Control)의 구성요소 중 필수적인 구동 원으로 DC모터를 많이 사용하고 있지만, DC모터는 정류작용 시 브러시의 스파크를 발생시키는 단점을 가진다. 이에 전기적 및 기계적 Noise가 적고 신뢰성이 높으며 수명이 긴 BLDC 모터의 개발이 필요하다. 이에 BLDC 모터의 기초 설계와 최적 설계를 통해 형상을 설계하고 이를 정자계 유한요소법을 이용하여 해석하고 목표 토크인 0.2[Nm]에 적합한 BLDC 모터를 설계하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.8-14
• /
• 2012

"Throttle-by-Wire" is an electronic throttle system in which mechanical cables and hydraulics are replaced by a fieldbus network, electric motors and sensors. It is crucial for an electronic throttle to design a controller that can offer an accurate and fast reference tracking performance in the presence of nonlinearities, such as friction in the gearbox and "limp-home" nonlinearity. This paper presents a nonlinear dynamic inversion based control algorithm for electronic throttle systems. Using the proposed method, the specified control performance can be achieved by canceling inherent nonlinear characteristics of the electronic throttle system. The control performance is investigated through a set of simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.598-602
• /
• 2003

In this paper, we propose the method to control the position of LDM(Linear DC Motor) using vision system. The proposed method is composed of a vision system for position detecting, and main computer calculates PID control output which is deliver to 8051 actuator circuit in serial communication. To confirm the usefulness of the proposed method, we experimented about position control of a small size LDM using CCD camera which has a performance 30frames/sec as vision system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.199-202
• /
• 1998

This paper describe an intelligent cruise control system for automobile. With the remarkable numerical increase of automobiles on the road, the optimized traffic flow control using the cruise control is one of the very important traffic problems to overcome the limitation of an existing road capacity. Based on this idea that minimize the fuel cost and the air pollution, and accept a driver's needs for driving, we have developed an intelligent cruise control system for vehicle. This proposed intelligent fuzzy cruise controller was successfully implemented using the fuzzy algorithm, the i80c196 μ-controller board and the throttle valve actuator. The field test results on an linear road was introduced.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.141-144
• /
• 2001

This paper proposes a decentralized control technique for 2-dimensional experimental helicopter systems. The decentralized control technique is especially suitable in large-scale control systems. We derive the stabilization condition for the interconnected Takagi-Sugeno (75) fuzzy system using the rigorous tool - Lyapunov stability criterion and formulate the controller design condition in terms of linear matrix inequality (LMI). To demonstrate the feasibility of the proposed method, we include the experiment result as well as a computer simulation one, which strongly convinces us the applicability to the industry.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.237-244
• /
• 2013

A continuous, explicit drain-current equation for short-channel double-gate (DG) MOSFETs has been derived based on the explicit surface potential equation. The model is physically derived from Poisson's equation in each region of operation and adopted in the unified regional approach. The proposed model has been verified with numerical solutions, physically scalable with channel length and gate/oxide materials as well as oxide/channel thicknesses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.290-296
• /
• 2015

This paper presents a novel educational model of subjects of electric, electronic and control for marine engineer in accordance with STCW 2010 amendments. In accordance with STCW 2010, contents of such courses in marine engineering operations of undergraduate programs in maritime university should be updated correspondingly to new features. In order to propose the model, this paper analyses and reviews subjects on electric, electronic and control in STCW convention compared to STCW 1995. Also, in this paper, subjects of electric, electronic and control in marine engineering operations in Korea and other countries are analyzed and a new educational model is proposed. in theoretical perspective and practical perspective.

• Structural Engineering and Mechanics
• /
• v.15 no.2
• /
• pp.239-248
• /
• 2003

The dynamic response analysis of closed loop control system based on probability for the intelligent truss structures with random parameters is presented. The expressions of numerical characteristics of structural dynamic response of closed loop control system are derived by means of the mode superposition method, in which the randomness of physical parameters of structural materials, geometric dimensions of active bars and passive bars, applied loads and control forces are considered simultaneously. The influences of the randomness of them on structural dynamic response are inspected by several engineering examples and some significant conclusions are obtained.