• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.2032-2038
• /
• 1989

Single mode optical fiber interferometeric sensors using phase tracking homodyne detection are typically susceptible to environmentally indured temperature fluctuations and other types of disturbances. A simple and effective phase tracking feedback electronic circuit for compensator is described to achieve stabilizing signal output, maximum sensitivity and linearity in the fiber optic Mach-Zehnder infterferometer in the presence of differential phase drift. The phase tracking range of the piezoelectric cyclinder in the reference arm is \ulcorner.7 \ulcornerad and the prabe mass about 1 gram in the sensing arm was used for measurements of the gravity acceleration.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1379-1387
• /
• 2011

A PID-feedforward controller and Robust Internal-loop Compensator (RIC) based on reinforcement learning using random variable sequences are provided to auto-tune parameters for each controller in the high-precision position control of PMLSM (Permanent Magnet Linear Synchronous Motor). Experiments prove the well-tuned controller could be reduced up to one-fifth level of tracking errors before learning by reinforcement learning. The RIC compared to the PID-feedforward controller showed approximately twice the performance in reducing tracking error and disturbance rejection.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.304-306
• /
• 1993

In this paper, the authors show a link between a heuristic controller used in industry and a theoretical generalized controller. First, we clarify the internal structure of the generalized two-degree-of-freedom controller which yields a link between the theoretical researches and the practical applications. Secondly, we indicate how to blend identification and control together without any modification of the controller. This is in fact the problem of closed-loop identification. Thirdly, we propose a design technique of a free parameter taking into account a robust stability based on the information obtained from the identification. Finally, we apply the proposed algorithm to trajectory control of DD robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.450-454
• /
• 1997

본 논문에서는 볼테라 비선형 시스템의 선형화를 위한 새로운 적응 선행처리 기법을 제시한다. 특히, 제안된 적응 선행처리 기법은 (i) 순수 비선형 왜곡 보상을 위한 부분(pure nonlinear distortion compensator: PNDC)과, (ii) 선형 왜곡 보상을 위한 선형 역필터(linear inverse filter: LIF)의 두 부분으로 구성된다. 본 논문의 선형화 기법의 장점으로는 기존의 P차 역(Pth-order inverse) 기법에 비하여 계산량이 상당히 감소되며, 적응 알고리듬이 보다 빠르고 안정된 수렴 특성을 나타낸다. 끝으로, 모의실험을 통하여, 제안된 선행처리 기법의 성능및 실제 적용 가능성을 살펴본다.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.572-574
• /
• 1998

This paper describes design method of control system with a pre-compensator using a neural network to compensate a error signal between a reference' signal and system response. The neural network which is used here is the mixed structure and it's algorithm is a back propagation that modify coupling coefficients. Applying this method to the position control system using DC servo motor as a driver, we verify the usefulness of this method with simulation.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.417-419
• /
• 1998

The ICD(Individual-Channel-Design) is a multivariable control design method based on the classical frequence response, in which the channel decomposition and the loop shaping on frequence domain are introduced. However, in this manner, it is difficult to satisfy time domain specifications such as overshoot, rise time, settling time. To solve the problem, we propose a new design method using CDM(Coefficient Diagram Method). And a new feedforward compensator is introduced for reducing interconnections.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.389-392
• /
• 2001

This paper presents neural load disturbance observer that used to deadbeat load torque observer and regulation of the compensation gain by parameter estimator. As a result, the response of PMSM follows that of the nominal plant. The load torque compensation method is compose of a neural deadbeat observer. To reduce of the noise effect, the post-filter, which is implemented by MA process, is proposed. The parameter compensator with RLSM (recursive least square method) parameter estimator is suggested to increase the performance of the load torque observer and main controller. The proposed estimator is combined with a high performance neural torque observer to resolve the problems. As a result, the proposed control system becomes a robust and precise system against the load torque and the parameter variation. A stability and usefulness, through the verified computer simulation, are shown in this paper.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.390-398
• /
• 2014

The systematic optimal tuning of power system stabilizers (PSSs) using the dynamic embedded optimization (DEO) technique is described in this paper. A hybrid system model which has the differential-algebraic-impulsive-switched (DAIS) structure is used as a tool for the DEO of PSSs. Two numerical optimization methods, which are the steepest descent and Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithms, are investigated to implement the DEO using the hybrid system model. As well as the gain and time constant of phase lead compensator, the output limits of PSSs with non-smooth nonlinearities are considered as the parameters to be optimized by the DEO. The simulation results show the effectiveness and robustness of the PSSs tuned by the proposed DEO technique on the IEEE 39 bus New England system to mitigate system damping.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.239-241
• /
• 2000

This paper describes a modeling of a FACTS(Flexible AC Transmission System) device, namely, SSSC(Static Synchronous Series Compensator) model. The SSSC, a solid-state voltage source inverter coupled with a transformer, is connected in series with a transmission line. SSSC provides controllable compensating voltage, which is in quadrature with the line current, over an capacitive and an inductive range, independently of the magnitude of the line current. This SSSC model is obtained from the injection model for series connected VSC(Voltage Source Converter) by adding a constraint that the injected voltage should be in quadrature with the line current. The paper discusses the basic operating and performance characteristics of the SSSC, and power flow control in power system.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.187-192
• /
• 2008

A saturation and deadzone compensator is designed for robot systems using fuzzy logic (FL) and neural network (NN). The classification property of FL system and the function approximation ability of the NN make them the natural candidate for the rejection of errors induced by the saturation and deadzone. The tuning algorithms are given for the fuzzy logic parameters and the NN weights, so that the saturation and deadzone compensation scheme becomes adaptive, guaranteeing small tracking errors and bounded parameter estimates. Formal nonlinear stability proofs are given to show that the tracking error is small. The NN saturation and FL deadzone compensator is simulated on a robot system to show its efficacy.