• 대한전자공학회논문지SD
• /
• 제38권8호
• /
• pp.72-84
• /
• 2001

마이크로파이프라인 회로의 모든 연산 소자의 타이밍은 아주 중요하다. 스캔 플립플롭을 이용한 경로 지연고장 테스팅에 관한 기존 연구들은 두 개의 테스트 패턴 중 두 번째 패턴의 조절용이도가 높아야 한다는 점을 간과하였다. 본 논문에서는 작은 면적 오버헤드로 마이크로파이프라인 회로의 경로 지연고장을 테스트 할 수 있는 새로운 스캔 래치 및 테스트 방법을 제안하였다. 새로운 스캔 래치를 사용하여 마이크로파이프라인의 경로지연고장을 테스트한 결과에서 기존연구에 비해 높은 경성 경로 지연고장 검출율을 얻었다. 또한 제안된 스캔 래치는 마이크로파이프라인의 고착고장 검출을 위한 BIST로 응용을 확대하기 쉽다.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.15-21
• /
• 2020

Smart systems in different application areas such as automotive, medical and consumer electronics require a novel manufacturing method of electronic, optical and mechanical functions into products. Traditional methods including mechanical assembly, bonding of plastic and electronic circuit cause the problems in large size of products and complicated manufacturing processes. In this study, thermoforming and film insert molding were applied to fabricate a dome shaped plastic part embedded with electronic circuits. The deformation of patterns printed on PET film was predicted by thermoforming simulation using T-SIM, and the results were compared with those by experiment. In order to decrease spring-back after thermoforming, the Taguchi method of design of experiment was used. Through ANOVA analysis, it was found that mold temperature was the most dominant parameter for spring-back. By using flow analysis, gate design was performed to decrease injection pressure. During film insert molding, the wash-out of ink printed on film occurred for Polycarbonate. When the resin was changed to PMMA, the wash-out disappeared due to low melt temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1424-1427
• /
• 2005

In this paper, we studied on the application of Organic Thin Film Transistors (OTFTs) to the active matrix organic light emitting diodes (AMOLED). We designed organic transistor based pixel circuits for AMOLED. The pixel circuit is consisted of two-transistor, one-capacitor and one-OLED. We report the simulation results of the pixel circuits that OLED current varied as the data line and scan line voltage. Also, we will describe the fabrication process of the Pentacene OTFTs arrays and the organic light emitting diodes. The driving results of the fabricated unit pixels and their 4x4 arrays are also presented.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.567-575
• /
• 2015

An improvement in the current fed parallel resonant half bridge (CFPRHB) circuits used in fluorescent lamp electronic ballasts is provided in this paper. The CFPRHB belongs to the self-oscillating family which includes the current fed push-pull and series resonant inverters, most of which are used in instant-start applications. However, many failure modes are related to the bypass capacitor according to an analysis of failed samples. In this paper, the operating functions of the existing topology in the steady state are analyzed and the main root cause of failure modes has been found. Comparisons between the two topologies are conducted in terms of the voltage stress of the bypass capacitor as well as the thermal and performance of the ballasts to verify the advantages of the proposed topology. It is found that the improved topology is capable of enhancing the reliability and reducing the cost of products without having a negative influence on the system performance.

• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.24-33
• /
• 2002

혼성 신호 회로의 설계에 있어 저비용의 고효율 테스트 효율을 보장하기 위해 테스트의 노력은 계속되어 왔다. 특히 테스트를 고려한 BIST(built-in-self-test)설계 방법으로 발전해가고 있는 추세인데, 회로상에서 전체적인 테스트 용이도와 분석에 있어 보다 향상된 방법으로 접근할 수 있고 이러한 시스템에 대해 분석하는데 수월하게 할 수도 있다. 이 논문에서는 효과적인 테스트를 위한 방법을 위해 DC전압과 전압 위상에 대한 BIST를 구현하는 것을 제안하였다. 즉 정상적인 회로와 고장회로에서의 동작에서 전압과 위상의 차이를 검출하는 회로를 하드웨어상으로 구성함으로써 비용과 시간 등을 효과적으로 줄이는 방법을 제안하였다. 실험 결과에서는 기존의 BIST와 비교하여 향상된 것을 나타낸다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.239-242
• /
• 2003

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.51-53
• /
• 2007

Ballasts for HID lamp need a igniter to start the lamp with very high voltage over several kV. Electronic ballasts use various internal igniter in electronic circuits. The paper describe the simulation method for designing the igniter, which helps selecting the component properly by estimating operation voltage and current in circuits.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1402-1405
• /
• 1993

In this paper, a fault evaluation method is proposed, which is to determine whether analog electronic circuits are faulty or not. In our method, evaluation characteristics of an expert test engineer are defined by means of directed graphs. By performing a multi-stage fuzzy inference based on the graphs, novice test engineers can derive a fault evaluation result satisfied by the expert. The effectiveness of our method is checked by some experiments for an amplifier circuit.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.282-282
• /
• 2010

LED Device was designed of electronic circuits of electrical power part for used Pspice student version and used Infrared LED lamps of load part. LED was used Computerized Electronic Medical Infrared Thermographic Imaging System for body surface Investigation of variable Body thermal asymmetry. It was knowledge body thermal Asymmetry of body surface and quantity body surface of electromagnetic wave to inflow electrical power part.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.468-468
• /
• 2000

In our laboratory, the control aspects are investigated in the photovoltaic power generation systems (PV systems). The PV system is very good for earth environment, but if it connects to power network system, many problems are raised (protection, voltage, harmonics etc.). In this paper, we present the result of the basic studies for the building of the PV system that amplifies the electric energy obtained from the solar cell. We consider electronic circuits in order to protect the PV system from power surge induced by lightning and also design an electronic circuit in order to detect defaults in the power network system. We would like to integrate these circuits into the PV system by considering its control equipment build by 8-bit microcomputer using various control theory (fuzzy, neural network etc.).