• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1559-1562
• /
• 1999

We formed $SiO_2:F$ films by low-temperature process called Liquid Phase Deposition(LPD) and investigated its electrical and physical properties. Because of the use of room-temperature and no special vacuum apparatus for forming $SiO_2:F$ films, this technique can have some advantages related with the application to dielectric interlayer for multilevel structure in ULSI devices. The growth rate 100nm/hr was obtained at the growth solution of 2.5mol/l. The P-etch rate showed a similar or better tendency compared with $SiO_2$ films formed by CVD, Sputter, E-beam evaporator etc.. The fourier transform infrared (FTIR) spectra revealed that the contained fluorine atoms exist uniform throughout the formed $SiO_2$ films. The Scanning Electron Microscope images showed that LPD-$SiO_2$ films could be stably grown on silicon substrates and the good step-coverage could also be obtained, which indicates that the LPD-$SiO_2$ films have some possibility of the application to planarization and interlayer dielectric films which are vitally necessary to achieve the multilevel interconnection in ULSI. The I-V characteristics has some distinct differences according to the concentration of growth solution.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.123-123
• /
• 2003

탄소나노튜브는 지금까지의 많은 연구를 통해 다양한 분야에 대한 응용 가능성이 확인되었으며, 그 중에서도 특히 탄소나노튜브를 이용한 전계방출표시소자(carbon nanotube field emission display, CNT-FED)는 상용화를 눈앞에 두고 있는 상황이다. 본 연구에서는 탄소나 노튜브를 합성할 수 있는 여러 가지 방법 중에서 열화학기상증착법(thermal chemical vapor deposition, thermal CVD)을 이용하여 유리기판 위에 탄소나노튜브를 합성하였다. Electron beam evaporation으로 유리기판 위에 전극층으로 Cr을 150nm를 증착하고 연속하여 촉매층인 Invar(Fe-53%Ni-6%Co 합금)를 10nm의 두께로 형성하였다. 사진식각으로 Cr층을 line 패턴한 후 Cr line 내의 Invar층을 line 및 dot 패턴하였다. 나노튜브 합성을 위해 480-58$0^{\circ}C$까지 진공분위기 또는 질소 분위기에서 20분간 승온한 후 CO(150sccm)와 H$_2$(1200sccm)를 주입하여 20분간 성장시키고 질소 분위기에서 냉각시켰다. 성장된 탄소나노튜브는 SEM, TEM, Raman spectroscopy 등을 통하여 구조 및 형상분석을 하였다. 진공승온의 경우 탄소불순물인 a-C이 많은 양 증착 되었으며 탄소나노튜브는 온도에 따라 1-5$\mu\textrm{m}$의 두께로 성장하였으나, 질소분위기 승온의 경우는 a-C이 거의 증착되지 않았으며 나노튜브의 두께가 10-20$\mu\textrm{m}$였다. 본 연구에서는 diode구조를 갖는 탄소나노튜브 에미터의 수명예측을 위해 여러 가지 가속측정조건에서 전계방출 특성을 연구하였다. Anode와 cathode 간의 간격을 400$\mu\textrm{m}$로 유지한 diode 구조에 대해 $10^{-6}$ torr 이하의 진공에서 전계방출을 측정하였다. 100 line의 에미터를 60Hz의 주파수에서 1/100 duty로 구동하였으며, duty비 증가에 따라 pulse의 on-time을 고정하고 frequency를 변화시켰다. dc까지 duty비가 증가됨에 따라 방출전류의 양이 선형적으로 증가하였다. 전압을 일정하게 고정시키고 각 duty비에서 시간에 따라 방출전류를 측정한 결과 duty비가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.2
• /
• pp.96-102
• /
• 2014

PURPOSE. This study was performed to characterize the effects of zirconia coated with calcium phosphate and hydroxyapatite compared to smooth zirconia after bone marrow-derived osteoblast culture. MATERIALS AND METHODS. Bone marrow-derived osteoblasts were cultured on (1) smooth zirconia, (2) zirconia coated with calcium phosphate (CaP), and (3) zirconia coated with hydroxyapatite (HA). The tetrazolium-based colorimetric assay (MTT test) was used for cell proliferation evaluation. Scanning electron microscopy (SEM) and alkaline phosphatase (ALP) activity was measured to evaluate the cellular morphology and differentiation rate. X-ray photoelectron spectroscopy (XPS) was employed for the analysis of surface chemistry. The genetic expression of the osteoblasts and dissolution behavior of the coatings were observed. Assessment of the significance level of the differences between the groups was done with analysis of variance (ANOVA). RESULTS. From the MTT assay, no significant difference between smooth and surface coated zirconia was found (P>.05). From the SEM image, cells on all three groups of discs were sporadically triangular or spread out in shape with formation of filopodia. From the ALP activity assay, the optical density of osteoblasts on smooth zirconia discs was higher than that on surface treated zirconia discs (P>.05). Most of the genes related to cell adhesion showed similar expression level between smooth and surface treated zirconia. The dissolution rate was higher with CaP than HA coating. CONCLUSION. The attachment and growth behavior of bone-marrow-derived osteoblasts cultured on smooth surface coated zirconia showed comparable results. However, the HA coating showed more time-dependent stability compared to the CaP coating.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.36-43
• /
• 2000

The sulfur pressure and TRA(rapid thermal annealing) conditions of the fabricated SrS:CuCl TFEL devices were optimized to improve blue color luminance. The thickness of the phosphor layer of SrS:CuCl TFEL devices fabricated by electron beam deposition system was 6000 ~ 8000 ${\AA}$. The fabricated TFEL devices were annealed at 800 $^{\circ}C$ for 3 min. It was shown that the crystallinity of SrS:CuCl phosphor was improved by an increase in RTA temperature and RTA time. Blue color was emitted from the TFEL device with emission peak wavelength of 468 nm and 500 nm. The CIE color coordinates were x = 0.21, y = 0.33. The luminance($L_{40}$) of TFEL device strongly depended on the sulfur pressure of deposition chamber and increased from 262 cd/$m^2$ to 728 cd/m2 as the sulfur pressure increased from $8{\times}10^{-6}$ torr to $2{\times}10^{-5}$ torr.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.12
• /
• pp.1171-1176
• /
• 2012

The selective patterning of a carbon nanotube (CNT) forest on a Si substrate has been performed using a femtosecond laser. The high shock wave generated by the femtosecond laser effectively removed the CNTs without damage to the Si substrate. This process has many advantages because it is performed without chemicals and can be easily applied to large-area patterning. The CNTs grown by plasma-enhanced chemical vapor deposition (PECVD) have a catalyst cap at the end of the nanotube owing to the tip-growth mode mechanism. For the application of an electron emission and biosensor probe, the catalyst cap is usually removed chemically, which damages the surface of the CNT wall. Precise control of the femtosecond laser power and focal position could solve this problem. Furthermore, selective CNT cutting using a femtosecond laser is also possible without any phase change in the CNTs, which is usually observed in the focused ion beam irradiation of CNTs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.231-231
• /
• 2010

GaN는 상온에서 3.4 eV의 넓은 밴드갭을 갖는 직접천이형 반도체로 우수한 전기적/광학적 특성 및 화학적 안정성으로 발광 다이오드 및 레이저 다이오드 등과 같은 광전소자 응용을 위한 소재로 많은 연구가 진행되어왔다. 특히, GaN 나노구조의 경우 낮은 결함밀도, 빠른 구동 및 고집적 특성 등을 가지기 때문에 효과적으로 소자의 광학적/전기적 특성을 향상시킬 수 있어 나노구조 성장을 위한 연구가 활발히 진행되고 있다. 최근에는 Metal organic vapor deposition (MOCVD), hot filament chemical vapor deposition (CVD), molecular beam epitaxy (MBE), hydride vapor phase epitaxy (HVPE) 등 다양한 방법을 통해 성장된 GaN 나노구조가 보고되고 있다. 하지만 고가 장비 사용 및 높은 공정 온도, 복잡한 공정과정이 요구되며 크기조절, 조성비, 도핑 등과 같은 해결되어야 할 문제가 여전히 남아있다. 본 연구에서는 나노구조를 형성하기 위하여 보다 간단한 방법인 전기화학증착법을 이용하여 GaN 나노구조를 ITO 및 FTO가 증착된 전도성 glass 기판 위에 성장하였고 성장 메커니즘 및 그 특성을 분석하였다. GaN 나노구조는 gallium nitrate와 ammonium nitrate가 혼합된 전해질 용액에 Pt mesh 구조 및 전도성 glass 기판을 1cm의 거리를 유지하도록 담가두고 일정한 전압을 인가하여 성장시켰다. Pt mesh 구조 및 전도성 glass 기판은 각각 상대전극 (counter electrode) 및 작업전극 (working electrode)으로 사용되었고 전해질 용액의 농도, 인가전압, 성장시간 등의 다양한 조건을 통하여 GaN 나노구조를 성장하고 분석하였다. 성장된 GaN 나노구조 및 형태는 field emission scanning electron microscopy (FE-SEM)를 이용하여 분석하였고, energy dispersive X-ray (EDX) 분석을 통하여 정량 및 정성적 분석을 수행하였다. 그리고 성장된 GaN 나노구조의 결정성을 조사하기 위해 X-ray diffraction (XRD)을 측정 및 분석하였다. 또한, photoluminescence (PL) 분석으로부터 GaN 나노구조의 광학적 특성을 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.359-359
• /
• 2014

In this study, surface plasmon resonance structures for the selective and the enhanced transmission of infrared light were designed. In order to relieve the large discontinuity of refractive index between air and metal hole array, $Si_3N_4$ was used as the impedance matching layer. Experimental parameter were calculated and determined in advance by the rigorous coupled wave analysis (RCWA) simulation, and then the experiment was carried out. A 2-dimensional metal hole array structures were patterned on the size of $1{\times}1cm^2$ GaAs substrate using photolithography process, and 5 nm thick Ti, 50 nm thick Au were deposited by E-beam evaporator, respectively. Subsequently, $Si_3N_4$ films with various thicknesses (150, 350, 550, and 750 nm) were deposited by plasma enhanced chemical vapor deposition (PECVD). For the comparison, transmittance of specimens with and without $Si_3N_4$ was measured using Fourier transform infrared spectroscopy (FTIR) in the range of $2.5-15{\mu}m$. Furthermore, the surface and the cross-sectional images were collected from the specimens by scanning electron microscopy (SEM). From the results, it was demonstrated that the transmittance was enhanced up to 80% by the deposition of 750 nm $Si_3N_4$ at $6.23{\mu}m$. It has advantage of enhanced transmission despite the simple fabrication process.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.147-151
• /
• 2000

We deposited the ion assisted ${Ta_2}{O_5}$ films and conventional thermal evaporated ${Ta_2}{O_5}$ films by using electron beam gun, and measured the optical properties and mechanical properties of the fabricated films according to the evaporation conditions. In the case of the TazOs films by oxygen ion assisted deposition with the anode voltage of 120 V, and current density of $50~500\muA/cm^2$, the refractive index exhibited 2.15 which was higher than the conventionally deposited film index 1.94 and the tensile stress exhibited $5.0\times10^8 dyne/cm^2$ which was lower than $7.0\times10^8 dyne/cm^2$. This properties coincided with the optical and mechanical properties of the films deposited at the elevated substrate temperature of $230^{\circ}C$. In the case of the argon ion assisted films the tensile stress was decreased but the absorption existed at the short wavelength in the visible spectral region. And all the fabricated films were found to be amorphous by the X-ray diffraction analysis. lysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.151-151
• /
• 2007

최근에 에피 성장된 ZnO는 UV-LED, 화학적-바이오센서와 투명전도 전극에 많은 관심을 받고 있다. 고 품질의 ZnO는 Metal-organic chemical vapor deposition(MOCVD), Pulsed laser deposition(PLD), molecular beam epitaxy(MBE), 그리고 마그네트론 스퍼터링법에 의해 성장이 이루어지고 있다. 대부분의 ZnO는 사파이어, 싫리콘과 같은 이종 기판 위에 성장되고 있으며, Heteroepitaxy로 성장된 ZnO 박막은 기판과 박막사이의 격자상수, 열팽창계수 차이로 인해 높은 결함 밀도를 보이고 있다. 이러한 문제점은 광전자 소자 응용에 있어 여러 가지 문제점을 야기 시킨다. 이와 같은 문제점을 해결하기 위해 박막과 기판사이에 저온 버퍼층을 사용하거나 같은 물질의 버퍼층을 사용하여 결할 밀도를 감소시키고, 높은 결정성을 가진 ZnO 박막을 성장시킨 결과들이 많이 보고되어지고 있다. 본 연구에서는 마그네트론 스퍼터링 법으로 저온 버퍼층 성장 없이 성장온도 만을 달리 하여 고품질의 ZnO 박막을 성장시켰다. ZnO 박막은 c-sapphire 기판위에 ZnO(99.9999%)의 타겟을 사용하여 $600{\sim}800^{\circ}C$ 온도에서 성장시켰고, 스퍼터링 가스로는 아르곤과 산소를 2:1 비율로 혼합하여 15mtorr의 압력에서 성장하였다. 이렇게 성장시킨 ZnO 박막은 Transmission Electron Microscopy (TEM), High-Resolution X-ray Diffraction (HRXRD), Low-temperature PL, 그리고 Atomic Force Microscopy (AFM)로 특성을 분석 하였다. ZnO 박막은 HRXRD (002) 면의 $\omega$-rocking curve운석 결과, $0.083^{\circ}$의 작은 FEHM을 얻었고, (102) 면의 $\varphi$-sacn을 통해 온도가 증가함에 따라 향상된 6-fold을 확인함으로새 에피성장됨을 알 수 있었다. 또한 TEM분석을 통해 $800^{\circ}C$에서 성장된 박막은 $6.7{\times}10^9/cm^2$의 전위밀도를 얻을 수 있었다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.207-215
• /
• 2000

Al films on cold-rolled steel sheet have been prepared by vacuum evaporation and arc-induced ion plating, respectively, and the evaporation rate and vapor distribution (thickness distribution over the substrate) have been investigated according to deposition conditions. The arc-induced ion plating (AIIP) method have been employed, which makes use of arc-like discharge current induced by ionization electrode located near the evaporation source. The AIIP takes advantage of high ionization rate compared with conventional ion plating, and can be carried out at low pressure of less than $10^{-4}$ torr. Very high evaporation rate of more than 2.0 mu\textrm{m}$/min could be achieved for Al evaporation using alumina liner by electron beam evaporation. The geometry factor n for the $cos^{n/\phi}$ vapor distribution, which affects the thickness distribution of films at the substrate turned out to be around 1 for vacuum evaporation, while it features around 2 or higher for ion plating. For the ion plated films, it has been found that the ionization condition and substrate bias are the main parameters to affect the thickness distribution of the films.