• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.297.2-297.2
• /
• 2016

Photoacoustic generation of ultrasound is an effective approach for development of high-frequency and high-amplitude ultrasound transmitters. This requires an efficient energy converter from optical input to acoustic output. For such photoacoustic conversion, various light-absorbing materials have been used such as metallic coating, dye-doped polymer composite, and nanostructure composite. These transmitters absorb laser pulses with 5-10 ns widths for generation of tens-of-MHz frequency ultrasound. The short optical pulse leads to rapid heating of the irradiated region and therefore fast thermal expansion before significant heat diffusion occurs to the surrounding. In this purpose, nanocomposite thin films containing gold nanoparticles, carbon nanotubes (CNTs), or carbon nanofibers have been recently proposed for high optical absorption, efficient thermoacosutic transfer, and mechanical robustness. These properties are necessary to produce a high-amplitude ultrasonic output under a low-energy optical input. Here, we investigate carbon nanotube (CNT)-polydimethylsiloxane (PDMS) composite transmitters and their nanostructure-originated characteristics enabling extraordinary energy conversion. We explain a thermoelastic energy conversion mechanism within the nanocomposite and examine nanostructures by using a scanning electron microscopy. Then, we measure laser-induced damage threshold of the transmitters against pulsed laser ablation. Particularly, laser-induced damage threshold has been largely overlooked so far in the development of photoacoustic transmitters. Higher damage threshold means that transmitters can withstand optical irradiation with higher laser energy and produce higher pressure output proportional to such optical input. We discuss an optimal design of CNT-PDMS composite transmitter for high-amplitude pressure generation (e.g. focused ultrasound transmitter) useful for therapeutic applications. It is fabricated using a focal structure (spherically concave substrate) that is coated with a CNT-PDMS composite layer. We also introduce some application examples of the high-amplitude focused transmitter based on the CNT-PDMS composite film.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.47-53
• /
• 2004

Eutectic Au-20Sn(compositions are all in weight percent unless specified otherwise) solder alloys were soldered on the Ni substrate with various time and temperature. The composition, phase identification and morphology of intermetallic compounds(IMC) at the interface were examined using Scanning Electron Microscopy(SEM). There were two types of IMCs, $(Au,Ni)_3Sn_2$ and $(Au,Ni)_3Sn$ at the interface. The transition in morphology of $(Au,Ni)_3Sn_2$ has been observed at $300{\~}400^{\circ}C$. The morphology transition of $(Au,Ni)_3Sn_2$ is due to the decrease of enthalpy of formation of $(Au,Ni)_3Sn_2$ phase and has been explained well by Jackson's parameter with temperature. Because the number of diffusion channel is different at each soldering temperature, IMC thickness is nearly same at all temperature.

• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.3-10
• /
• 2017

Objective: Microbial aggregation around dental implants can lead to loss/loosening of the implants. This study was aimed at surface treating titanium microimplants with silver nanoparticles (AgNPs) to achieve antibacterial properties. Methods: AgNP-modified titanium microimplants (Ti-nAg) were prepared using two methods. The first method involved coating the microimplants with regular AgNPs (Ti-AgNP) and the second involved coating them with a AgNP-coated biopolymer (Ti-BP-AgNP). The topologies, microstructures, and chemical compositions of the surfaces of the Ti-nAg were characterized by scanning electron microscopy (SEM) equipped with energy-dispersive spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Disk diffusion tests using Streptococcus mutans, Streptococcus sanguinis, and Aggregatibacter actinomycetemcomitans were performed to test the antibacterial activity of the Ti-nAg microimplants. Results: SEM revealed that only a meager amount of AgNPs was sparsely deposited on the Ti-AgNP surface with the first method, while a layer of AgNP-coated biopolymer extended along the Ti-BP-AgNP surface in the second method. The diameters of the coated nanoparticles were in the range of 10 to 30 nm. EDS revealed 1.05 atomic % of Ag on the surface of the Ti-AgNP and an astounding 21.2 atomic % on the surface of the Ti-BP-AgNP. XPS confirmed the metallic state of silver on the Ti-BP-AgNP surface. After 24 hours of incubation, clear zones of inhibition were seen around the Ti-BP-AgNP microimplants in all three test bacterial culture plates, whereas no antibacterial effect was observed with the Ti-AgNP microimplants. Conclusions: Titanium microimplants modified with Ti-BP-AgNP exhibit excellent antibacterial properties, making them a promising implantable biomaterial.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.3
• /
• pp.284-292
• /
• 2020

In this study, hydrogen charging was conducted for API X70 steel by the electro-chemical hydrogen charging method. Right after hydrogen was diffused from the specimen surface to the inside of the X70, the small punch tests and hydrogen concentration analysis was conducted within 5 minutes. Hydrogen was analyzed by melting the whole specimen and detect the gas after melting. Mechanical properties were measured by the small punch (SP) testing. Fracture surface and specimen surface were observed using scanning electron microscope. Three tests were repeated for study sensitivity of the SP test results under a same charging condition. It was observed that the variation of the maximum load, SP displacement at failure, hydrogen concentration as the charging period was not much in the case of X70 as the other steel such as Inconel. It can be argued that X70 base metal may have high hydrogen damage resistance and hydrogen diffusion in the base metal would not cause much embrittlement. Limitations of the SP test with 0.5 mm thickness for hydrogen damage test for X70 were discussed.

• The Plant Pathology Journal
• /
• v.22 no.1
• /
• pp.51-62
• /
• 2006

Three strains of Cucumber mosaic virus (CMV) have been found to cause a lethal disease, referred to as fern leaf syndromes and mild mosaic symptoms in tomato (Lycopersicon esculentum Mill.) crops grown in Kuwait. CMV strains were detected and identified based on host range, symptomatology, serology, electron microscopy, and ribonucleic acid (RNA) electrophoresis in polyacrylamide gels. A high degree of viral genomic heterogeneity was detected among CMV strains isolated in Kuwait, with no apparent correlation to symptomatology in tomato host plants. Two different virus satellites of 'CMV associated RNA 5', designated CARNA 5, were detected in two virus strains that caused both lethal disease and mild symptoms, designated CMV-D1 and CMV-S1 respectively. CARNA5 was not detected in the third CMV strain that caused fern leaf syndromes designated CMV-F. All the three isolated strains were serologically indistinguishable from each other and may belong to one serotype according to Ouchterlony gel diffusion tests. These strains transmitted via aphids (Myzus persicae Sulz) in a non-persistent manner. Physical properties of the virus strains were very similar where thermal inactivation test showed that virus withstood heating for 10 min at $70^{/circ}$, dilution end point was $10^{-4}$, and the longevity in vitro at room temperature was less than 5 days for all virus strains. CMV-D1 and CMV-F were the most devastating diseases spreading in both greenhouse and field-grown tomato where aborted flower buds failed on fruit setting due to the viral infection. This is the first report to isolate three different strains of CMV in Kuwait.

• Natural Product Sciences
• /
• v.23 no.2
• /
• pp.125-131
• /
• 2017

Clitoria ternatea or Commonly known blue pea, is a perennial climber crop native to Asian countries. The current study was aimed to evaluate the antimicrobial activity C. ternatea extract on food borne microorganisms and its antifungal effect on Penicillium expansum. The extract showed significant antimicrobial activity against 3 Gram positive bacteria, 2 Gram negative bacteria and 1 filamentous fungus on disc diffusion assay. The extract also showed good biocidal effect on all Gram positive bacteria tested and P. expansum. However, the kill curve analysis revealed that the fungicidal activity of the extract against P. expansum conidia was depend on the concentration of the extract and the time of exposure of the conidia to the extract. The scanning electron micrograph of the extract treated P. expansum culture showed alterations in the morphology of fungal hyphae. The germination of P. expansum conidia was completely inhibited and conidial development was totally suppressed by the extract, suggesting the possible mode of action of anthocyanin. Besides, the extract also exhibited 5.0-log suppression of microbial growth relative to control in the rice model. The results indicate the potential use of the C. ternatea anthocyanin as food biopreservative.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.43-47
• /
• 2003

As and BF$_2$dopants are implanted for the formation of source/drain with dose of 1${\times}$10$^{15}$ ions/$\textrm{cm}^2$∼5${\times}$10$^{15}$ ions/$\textrm{cm}^2$ then formed cobalt disilicide with Co/Ti deposition and doubly rapid thermal annealing. Appropriate ion implantation and cobalt salicide process are employed to meet the sub-0.13 $\mu\textrm{m}$ CMOS devices. We investigated the process results of sheet resistance, dopant redistribution, and surface-interface microstructure with a four-point probe, a secondary ion mass spectroscope(SIMS), a scanning probe microscope (SPM), and a cross sectional transmission electron microscope(TEM), respectively. Sheet resistance increased to 8%∼12% as dose increased in $CoSi_2$$n^{＋}$ and $CoSi_2$$p^{V}$ , while sheet resistance uniformity showed very little variation. SIMS depth profiling revealed that the diffusion of As and B was enhanced as dose increased in $CoSi_2$$n^{＋}$ and $CoSi_2$$p^{＋}$ . The surface roughness of root mean square(RMS) values measured by a SPM decreased as dose increased in $CoSi_2$$n^{＋}$ , while little variation was observed in $CoSi_2$$p^{＋}$ . Cross sectional TEM images showed that the spikes of 30 nm∼50 nm-depth were formed at the interfaces of $CoSi_2$$n^{＋}$ / and $CoSi_2$/$p^{＋}$, which indicate the possible leakage current source. Our result implied that Co/Ti cobalt salicide was compatible with high dose sub-0.13$\mu\textrm{m}$ process.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.4
• /
• pp.195-202
• /
• 1989

In attempt to improve the chemotherapeutic activity of adriamycin, adriamycin-entrapped HSA microspheres were prepared and investigated by the various in vitro experiments. The shape, surface characteristics and size distribution of HSA microspheres are observed by scanning electron microscopy. The in vitro drug release, albumin matrix degradation by protease of HSA microspheres were studied. The shape of HSA microspheres were spherical and the surface was smooth and compact. The size of HSA microspheres ranged from 0.4 to $2.5\;{\mu}m$ and have average diameters of 0.5 to $0.7\;{\mu}m$. The size distribution of HSA microspheres prepared by ultrasonication was mainly affected by albumin concentration and heating time in the process of hardening. In in vitro, almost all adriamycin was released from HSA microspheres for 8 hr. Analysis of the resulting adriamycin release profiles demonstrated that adriamycin is released from the microspheres in two distinct steps, a fast phase (until 30 min) followed by a much slower sustained release phase. Drug release, which is due to diffusion, was depended on the rate of matrix hydration. Drug release was largely affected by albumin concentration and heating temperature during the process of hardening. Albumin matrix degradation of HSA microspheres was affected by heating temperature and albumin concentration. Higher temperature and longer times generally produce harder, less porous, and slowly degradable microspheres.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.187-194
• /
• 1998

InGaAsP epitaxial layers lattice matched to InP were grown at 600 and $620^{\circ}C$ by low pressure metalorganic chemical vapor deposition. Solid phase composition of group III was controlled by the diffusion flux gas phase to the reachion surface. For the case of group V, the difference of As and P vapor pressure and pyrolysis efficiency of $PH_3$and $AsH_3$ mainly determined their in corporation into solid. An abnormal behavior of peak energy shift was observed below 75K in temperature variant photoluminescence study. This abnormal behavior was explained by the difference in order of ordering which makes spatial variation of energy gap in InGaAsP layer and this explanation was supported by the analyses of transmission electron microscopy and transmission spectroscopy.