• Current Photovoltaic Research
• /
• v.3 no.4
• /
• pp.130-134
• /
• 2015

The high efficiency cell research processes through the KF post deposition treatment (PDT) of the $Cu(In,Ga)Se_2(CIGS)$ thin film has been very actively progress. In this study, it CIGS thin film deposition process when KF PDT 300 to the processing temperature, 350, $400^{\circ}C$ changed to soda-lime glass (SLG) efficiency of the CIGS thin film characteristics, and solar cell according to Na presence of diffusion from the substrate the effects were analyzed. As a result, the lower the temperature of KF PDT and serves to interrupt the flow of current K-CIGS layer is not removed from the reaction surface, FF and photocurrent is decreased significantly. Blocking of the Na diffusion from the glass substrate is significantly increased while the optical voltage, photocurrent and FF is a low temperature (300, $350^{\circ}C$) in the greatly reduced, and in $400^{\circ}C$ tend to reduce fine. It is the presence of Na in CIGS thin film by electron-induced degradation of the microstructure of CIGS thin film is expected to have a significant impact on increasing the hole recombination rate a reaction layer is formed of the K elements in the CIGS thin film surface.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.351-357
• /
• 2006

Recently there is increasing the flow of hazardous chemical substances caused by industrial waste waters into a main river. It is needed to make the high treatment in drinking water treatment plants for reducing a health risk. Therefore, the monitoring of trace hazardous chemical substances by the industrial waste water inflow is available increasing economical efficiency of river management as well as reduction of risk. In this study, the most important substance among numerical and quantitative trace hazardous chemicals is Hexachlorobutadiene in an effluent of industrial wastes. However all items of GroupII which was included with semiconductor, electricity/electron and metal assemble was not detected. It means that we must consider the characteristics and behavior of load pollutants to water resources to select monitoring items. That was called 'preparatory monitoring'. We can reduce an economical consumption as well as risks from these pollutants using the preparatory monitoring.

• Journal of Surface Science and Engineering
• /
• v.49 no.3
• /
• pp.307-315
• /
• 2016

The properties of AlTiN films by a cathodic arc deposition process have been studied. Oblique angle deposition has been applied to deposit AlTiN films. AlTiN films have been deposited on stainless steel (SUS304) and cemented carbide (WC) at a substrate temperature of $500^{\circ}C$. AlTiN films were analyzed by scanning electron microscopy, glow-discharge light spectroscopy, micro-vickers hardness, and nanoindenter. When applying a current of 50 A to the cathodic arc source, it showed that the density of macroparticle of AlTiN films was 5 lower than other deposition conditions. With the increase of the bias voltage applied to the substrate up to -150 V, the density of macroparticle was decreased. The change of the $N_2$ flow rate during coating process made no influence on the film properties. For the multi-layered films, the film prepared at oblique angle of $60^{\circ}$ showed the highest hardness of 28 GPa and $H^3/E^2$ index of 0.18. AlTiN films have been shown a good oxidation resistance up to $800^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• v.29 no.3
• /
• pp.281-287
• /
• 2004

The purposes of this study were to evaluate the effect of adhesive property on microtensile bond strength and to determine the failure mode. Flat occlusal dentin surfaces were prepared using low-speed diamond saw. The dentin was etched with 37％ phosphoric acid. The following adhesives were applied to the etched dentin to manufacturer's directions： Scotchbond Multi-Purpose in group SM, Prime＆Bond NT in group NT, Scotchbond Multi-Purpose followed by Tetric-flow in group TR. After adhesive application, a cylinder of resin-based composite was built up on the occlusal surface. Each tooth was sectioned vertically to obtain the $1{\;}{\times}{\;}1\textrm{mm}^2$ "sticks". Microtensile bond strength were determined. Each specimen was observed under stereomicroscope and scanning electron microscope (SEM) to examine the failure mode. Data were analyzed using one way ANOVA. The results of this study were as follows：1. The microtensile bond strength value were：group SM ($18.98{\pm}3.01MPa$). group NT ($16.01{\pm}4.82MPa$) and group TR ($17.56{\pm}3.22MPa$). No significant statistical differences were observed among the groups (P>0.05). 2. Most of specimens showed mixed failure. In group TR, there was a higher number of specimens showing areas of cohesive failure in resin.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.47-54
• /
• 1996

UASB reactor was operated for treating wastewater containing high sulfate to assess their performance, competition between sulfate-reducing bacteria(SRB) and methane-producing bacteria(MPB), and the change in the characteristics of microbial granules according to change of hydraulic retention time(HRT) in the reactor. The reactor was fed with a synthetic moderate strength wastes(glucose, 2000 mgCOD/l) containing high sulfate($2400mgSO_4{^{2-}}/l$). The organic loading rate(OLR) ranged from 1.5 to 3.0 gCOD/l.d as HRT maintained 15 to 30 hrs in the stage I. The COD removal efficiency was between 80 to 92%. During this period, methane yield rapidly decreased from 0.3 to 0.1 1 $CH_4$/gCODremoved. While sulfide concentration in the effluent increased from 80 to 200 mgS/l. This indicates that SRB becomes dominant over MPB at a relatively long HRT in the excess sulfate. When OLR of reactor maintained from 5 to 8 gCOD/l.d in the stage II, methane yield increased from 0.1 to 0.17 1 $CH_4$/gCODremoved regardless of decrease of COD removal efficiency. This indicates that SRB is more sensitive to the change of a short HRT than MPB. In the competition between SRB and MPB, about 30% of the removed COD was utilized by SRB at HRT of 30 hrs during the start-up period, while about 73% was used by SRB at HRT of 15hrs at the final step of second experimental stage. Whereas after shock exposure of OLR about 62% was utilized by SRB at HRT of 5hrs. It indicates that SRB is strongly suppressed by the wash-out of significant dispersed SRB since a large electron flow is distributed to the MPB. In addition, the granulation in the presence of high sulfate is unfavoured at a long HRT because of substrate transport limitations into MPB like Methanothrix spp. which is an important factor in the composition of the granules. Accordingly, granule sizes in the UASB reactor decreased with time due to weak network frame of granules by the decreased activity of MPB.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.448-448
• /
• 2010

Magnetic random access memory (MRAM) has made a prominent progress in memory performance and has brought a bright prospect for the next generation nonvolatile memory technologies due to its excellent advantages. Dry etching process of magnetic thin films is one of the important issues for the magnetic devices such as magnetic tunneling junctions (MTJs) based MRAM. CoFeB is a well-known soft ferromagnetic material, of particular interest for magnetic tunnel junctions (MTJs) and other devices based on tunneling magneto-resistance (TMR), such as spin-transfer-torque MRAM. One particular example is the CoFeB - MgO - CoFeB system, which has already been integrated in MRAM. In all of these applications, knowledge of control over the etching properties of CoFeB is crucial. Recently, transferring the pattern by using milling is a commonly used, although the redeposition of back-sputtered etch products on the sidewalls and the low etch rate of this method are main disadvantages. So the other method which has reported about much higher etch rates of >$50{\AA}/s$ for magnetic multi-layer structures using $Cl_2$/Ar plasmas is proposed. However, the chlorinated etch residues on the sidewalls of the etched features tend to severely corrode the magnetic material. Besides avoiding corrosion, during etching facets format the sidewalls of the mask due to physical sputtering of the mask material. Therefore, in this work, magnetic material such as CoFeB was etched in an ICP etching system using the gases which can be expected to form volatile metallo-organic compounds. As the gases, carbon monoxide (CO) and ammonia ($NH_3$) were used as etching gases to form carbonyl volatiles, and the etched features of CoFeB thin films under by Ta masking material were observed with electron microscopy to confirm etched resolution. And the etch conditions such as bias power, gas combination flow, process pressure, and source power were varied to find out and control the properties of magnetic layer during the process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.184.2-184.2
• /
• 2013

대기압 플라즈마와 생체용액과의 상호작용은 Bio-medical 분야에서 주목 받고 있다. 대기압 플라즈마는 전자온도가 고온 플라즈마 보다 상대적으로 낮기 때문에 생체에 적용하기가 적합하다. 따라서 플라즈마가 세포에 미치는 영향을 관측하기 위해서 대기압 플라즈마를 이용하여 생체용액과의 반응을 살펴보고자 한다. Ar gas를 이용하여 플라즈마를 발생시켜 생체용액 표면을 처리하고 OES (Optical Emission Spectroscopy)을 이용해 방출 선을 조사했다. Ar 기체를 이용한 대기압 플라즈마를 사용하여 다른종류의 용액내의 OH Radical Density를 측정하였다. 용액으로는 DI (deionized) water 와 PBS (1x phosphate buffered saline)를 사용하였다. Ar gas를 200 sccm ($cm^3/min$) 으로 흐르게 하였을 때, DI water의 OH Radical Density 는 $4.33{\times}10^{16}cm^{-3}$ 으로 측정되었으며, 자외선 흡수분광법으로 측정한 완충용액인 PBS의 OH Radical Density 측정값은 $1.87{\times}10^{16}cm^{-3}$ 이다. 이런 특성을 기반으로, PBS 용액내의 H460 (Lung Cancer Cell) 와 L132 (Lung Normal Cell)을 깊이와 시간에 따라 대기압 플라즈마로 처리하여 cell의 변화를 보았다. 실험 각각의 조건은 깊이를 2 mm, 4 mm, 6 mm이며 시간은 10 sec, 30 sec, 60 sec 로 설정하였다. 표면으로부터의 깊이가 2 mm, 4 mm, 6 mm 일때 의 OH Radical Density는 각각 $1.87{\times}10^{16}cm^{-3}$, $0.5{\times}10^{16}cm^{-3}$, 0으로써 용액이 깊어질수록 OH Radical Density가 감소함을 볼 수 있다. OH radical density가 높은 2 mm 에서, 처리한 시간이 길어질수록 Cell 은 영향을 많이 받음을 관찰 할 수 있었다. H460 이 L132 보다 플라즈마에 영향을 많이 받음을 확인하였다. 특성변화를 알아보기 위하여 raman spectroscopy, flow cytometry, electron spin resonance로 측정한다.

• Parasites, Hosts and Diseases
• /
• v.58 no.2
• /
• pp.173-179
• /
• 2020

Leishmaniasis is a prevalent cause of death and animal morbidity in underdeveloped countries of endemic area. However, there is few vaccine and effective drugs. Antimicrobial peptides are involved in the innate immune response in many organisms and are being developed as novel drugs against parasitic infections. In the present study, we synthesized a 5-amino acid peptide REDLK, which mutated the C-terminus of Pseudomonas exotoxin, to identify its effect on the Leishmania tarentolae. Promastigotes were incubated with different concentration of REDLK peptide, and the viability of parasite was assessed using MTT and Trypan blue dye. Morphologic damage of Leishmania was analyzed by light and electron microscopy. Cellular apoptosis was observed using the annexin V-FITC/PI apoptosis detection kit, mitochondrial membrane potential assay kit and flow cytometry. Our results showed that Leishmania tarentolae was susceptible to REDLK in a dose-dependent manner, disrupt the surface membrane integrity and caused parasite apoptosis. In our study, we demonstrated the leishmanicidal activity of an antimicrobial peptide REDLK from Pseudomonas aeruginosa against Leishmania tarentolae in vitro and present a foundation for further research of anti-leishmanial drugs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.61-61
• /
• 2018

본 연구에서는 전자 플로터 시스템의 관한 것으로, 특히 수표면 위에서 작용하는 바람, 파도 등의 영향을 거의 받지 않으면서 물의 흐름방향에 순응하여 이동할 수 있도록 함으로써 정확한 유속 측정이 가능하도록 한 연직 다 지점 GPS 전자 플로터 시스템 및 이를 이용한 유속 측정방법을 제시하였다. 일반적으로 대기나 해양, 하천 등에서 유동 유체의 유동상태를 파악하기 위하여 다양한 연구가 진행되고 있다. 이 같은 연구에서 유체의 유동 특성을 파악하기 위해 시뮬레이션을 통한 모델링을 하는 것이 한 방법이나, 이는 실제 유체가 유동하는 환경에서 발생되는 요인들을 나타내기 위해서는 한계가 있기 때문에 실제 측정을 통한 검증만큼 실제적이진 못하였다. 본 연구의 유속 측정 장치는 GPS 수신기를 탑재한 GPS 전자플로터가 수표면에 부유하고 라인으로 연결된 수중 추진부인 가이드볼, 중량보강부재로 구성되어져 있다. 기존 연구의 GPS 전자플로터는 1구형으로 표면유속만 측정 할 수 있었고 바람, 파도와 같은 외부영향에 대한 단점이 있었다. 이를 보완하기 위해 연직 다 지점 GPS 전자 플로터를 개발하였으며 이는 수표면 위에서 가해지는 바람, 파도 등의 영향을 거의 받지 않고, 하측에서 지지해주는 가이드볼이 물의 흐름에 의해 자연스럽게 자전할 수 있도록 구성되어져 보다 원활하게 물의 흐름에 순응하여 이동하고 수심에 따라 가이드볼 개수를 조절할 수 있기 때문에 대하천에서 운용이 가능하다. 이러한 유속 측정 장치 개발은 접근의 위험성과 안정성이라는 장점을 가지고 있으며 대하천 및 중소하천에서도 다양하게 운용이 가능하다. 또한 화학유출사고와 같은 문제가 많이 발생하는 요즘 화학사고와 관련된 연구들에 많은 도움이 될 것으로 사료된다.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.71-76
• /
• 2021

As opposed to using fossil fuels, we need to use eco-friendly resources such as sunlight, raindrops and wind to produce electricity and combat environmental pollution. A triboelectric nanogenerator (TENG) is a device that converts mechanical energy into electricity by inducing repetitive contact and separation of two dissimilar materials. During the contact and separation processes, electron flow occurs owing to a change in electric potential of the contacting surface caused by contact electrification and electrostatic induction mechanisms. A solid-solid contact TENG is widely known, but it is possible to generate electricity via liquid-solid contact. Therefore, by designing a hydrophobic TENG, we can gather electricity from raindrop energy in a feasible manner. To fabricate the superhydrophobic surface of TENGs, we employ a dip coating technique to synthesize an octadecylamine (ODA)- and polydimethylsiloxane (PDMS)-based coating on polyethylene terephthalate (PET). The synthesized coating exhibits superhydrophobicity with a contact angle greater than 150° and generates a current of 2.2 ㎂/L while water droplets fall onto it continuously. Hence, we prepare a box-type TENG, with the ODA/PDMS coating deposited on the inside, and place a 1.5 mL water droplet into it. Resultantly, we confirm that the induced vibration causes continuous impacts between the ODA/PDMS coating and the water, generating approximately 100 pA for each impact.