• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.65-69
• /
• 2009

Carbon nanotubes (CNTs) were coated with undoped zinc oxide (ZnO) or 5 wt% gallium-incorporated ZnO (GZO) using various deposition conditions. The CNTs were directly grown on conical-type tungsten substrates at $700^{\circ}C$ using inductively coupled plasma-chemical vapor deposition. The pulsed laser deposition technique was used to deposit the ZnO and GZO thin films with very low stress. Field-emission scanning electron microscopy and high-resolution transmission electron microscopy were used to monitor the variations in the morphology and microstructure of CNTs prior to and after ZnO or GZO coating. The formation of ZnO and GZO films on CNTs was confirmed using energy-dispersive x-ray spectroscopy. In comparison to the as-grown (uncoated) CNT emitter, the CNT emitter that was coated with a thin (10 nm) GZO film showed remarkably improved field emission characteristics, such as the emission current of $325\;{\mu}A$ at 1 kV and the threshold field of $1.96\;V/{\mu}m$ at $0.1\;{\mu}A$, and it also exhibited the highly stable operation of emission current up to 40 h.

• 폴리머
• /
• 제29권5호
• /
• pp.486-492
• /
• 2005

적색을 낼 수 있는 물질을 만들기 위해 비공액 주사슬로 되어 있는 고분자의 곁사슬에 스티렌 분자가 연결되어 있는 트리페닐아민, 반응성 있는 작용기를 가진 아미노벤즈알데히드 그룹, 및 PM(4-(dicyanomethylene)-2-(tertbutyl)4H-pyran) 그룹을 도입하였다. 이 고분자의 전자 흡수 스펙트럼은 용액과 필름 상태에서 비슷하였다. 모든 고분자는 전기화학적으로 활성을 보였으며, 전기 발광 소자를 작동하였을 때 700nm 근처에서 적색을 보였다. $ITO/PPV/P5-PM/BCP/Alq_3/Al$으로 구성된 소자는 $50mA/cm^2$의 낮은 전류 밀도에서 $120cd/m^2$의 밝기를 보였으며, 외부 양자 효율은 $0.67\%$를 나타내었다. 발광 고분자 층에서의 균형있는 전하의 재결합을 유도하여 소자의 발광 효율을 높일 수 있었다. 이중 기능성(bifunctionalized)을 도입함으로써 적색 발광을 내면서 효율이 높은 발광 고분자를 개발하였다.

• 한국진공학회지
• /
• 제20권6호
• /
• pp.403-408
• /
• 2011

MFX tube를 개발하기 위하여, MFX tube 내에서 전계방출음극으로부터 방출된 전자의 궤적을 SIMION 프로그램을 이용하여 전산모사하였다. 전자의 출발위치와 상관없이 emitter에서 방출된 전자빔을 한곳에 집중시킬 수 있는 optimum extractor voltage Ve가 존재한다는 것을 알아내었다. Extractor voltage Ve는 source voltage Vs에 따라 변하지만, 두 전압의 비율(Ve/Vs)는 항상 일정하고, 그 값은 99.4%였다. Source와 extractor에 인가된 전압의 비율(Ve/Vs)이 99.4%일 때, 교차점에서의 빔 직경은 $1.2{\mu}m$였다. MFXG의 초점 크기는 교차점에서의 beam diameter보다 작을 수 없기 때문에, 교차점에서의 beam diameter을 작게 할 수 있는 조건을 찾는 것은 중요하다. 따라서 위의 두 결과는 MFX tube의 개발에 있어서 매우 중요한 결과로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1440-1441
• /
• 1995

We fabricated diode-type silicon field emitter array device and tested the current-voltage characteristics. Silicon oxide layer having the thickness of $1{\mu}m$ is grown in the (100) oriented n-type silicon substrates. Oxide layer is patterned by the mask with $10{\mu}m$ diameter circles. Silicon substrate is then etched using NAF 1 solution to form the sharp tip arrays as an electron source. In the UHV test station, we tested the current-voltage characteristics for the samples. Turn-on voltage was about 140V and maximum emission current was $310{\mu}A$ at 164V. We studied about silicon bonding process for future work, too.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.181-181
• /
• 2010

Few-walled carbon nanotubes (FWNTs)-based field emitters with long term stability are fabricated by using a spray method. Tetraethylorthosilicate (TEOS) sol as a binder was mixed with dispersed solution of FWNTs to enhance the adhesion of FWNTs on the cathode substrate. Due to the strong intermolecular interaction of TEOS to the functional groups attached on CNTs and substrate, CNTs are tightly adhered to the cathode electrode when heat treatment is performed at $150^{\circ}C$ for 1 hour, resulting in a stable electron emission of CNT emitters for long time. Excellent field emission characteristics were exhibited, with a large field enhancement factor and low turn-on voltage, comparable to those of CNT emitters fabricated by a screen printing of CNT paste. Therefore, FWNTs / TEOS hybrid films could be utilized as an alternative for the efficient and reliable field emitters.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.799-804
• /
• 2016

A miniature X-ray tube based on a carbon-nanotube electron emitter has been employed for the application to a dental radiography. The miniature X-ray tube has an outer diameter of 7 mm and a length of 47 mm. The miniature X-ray tube is operated in a negative high-voltage mode in which the X-ray target is electrically grounded. In addition, X-rays are generated only to the teeth directions using a collimator while X-rays generated to other directions are shielded. Hence, the X-ray tube can be safely inserted into a human mouth. Using the intra-oral X-ray tube, a dental radiography is demonstrated where the positions of an X-ray source and a sensor are reversed compared with a conventional dental radiography system. X-ray images of five neighboring teeth are obtained and, furthermore, both left and right molar images are achieved by a single X-ray shot of the miniature X-ray tube.

• 한국재료학회지
• /
• 제10권4호
• /
• pp.295-300
• /
• 2000

반응성 이온 식각과 산화막을 이용한 첨예화 공정을 통하여 균일한 실리콘 팁 어레이를 제작한 후, 그 위에 Pd을 증착하여, Pd 코팅이 전계 방출특성에 미치는 영향에 대해 조사하였다. 어레이에 존재하는 표면 산화막을 제거한 후의 전계 방출 특성의 향상은 매우 작았으나, $100{\AA}$의 Pd을 코팅한 후에는 30V의 구동전압이 감소하는 등 전계 방출특성이 크게 향상되었다. 이는 Pd 코팅에 의해 팁의 표면 거칠기가 증가하고, 전자가 방출되는 팁 끝부분의 반경이 감소하였기 때문이다. 한편 Pd을 코팅한 에미터는 높은 방출 전류 영역에서 우수한 동작 안전성을 보였다. 이를 통하여 Pd이 코팅된 실리콘 에미터가 고온에서의 동작과 표면안정성에서 우수한 특성을 보임을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1270_1271
• /
• 2009

In this research, gallium-incorporated zinc oxide (ZnO:Ga) thin films have been used as a coating material for enhancing the field-emission property of CNT-emitters. Multi-walled CNTs were directly grown on conical-type ($250{\mu}m$ in diameter) metal-tip substrates at $700^{\circ}C$ by inductively coupled plasma-chemical vapor deposition (ICP-CVD). The pulsed laser deposition (PLD) technique was used to produce 5wt% gallium-doped ZnO (5GZO) films with very low stress. The structural properties of ZnO and 5GZO coated CNTs were characterized by Raman spectroscopy. Field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM) were also used to monitor the variation in the morphology and microstructure of CNTs before and after 5GZO-coating. The measurement of the field emission characteristics showed that the emitter that coated the 5GZO (10nm) on CNTs exhibited the best performance: a maximum emission current of $325{\mu}A$, a threshold field of 2.2 V/${\mu}m$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1021-1023
• /
• 2003

We studied field-emission characteristics of CNTs under various pre-treatment with $NH_{3}$ plasma on the substrate. The turn-on electric field is the lowest value and field enhancement factor (${\beta}$) is he highest value in CNTs pre-treated by $NH_3$ plasma (80 W and 5 min). The field-emission property of CNTs grown on the Ta substrate is slightly better than on the W substrate.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.335-338
• /
• 2008

New efficient red emitter having short p?-conjugation length and asymmetric bulky structure, 2-(7-diphenylamino-benzo[1,2,5]thiadiazole-4-ylmethylene)-malononitrile, was synthesized and characterized. Using this material as a dopant, we fabricated electroluminescence device with a structure of ITO/DNTPD/NPD/BTZA (5 wt% in Alq3)/Alq3/LiF/Al. The device exhibited a high brightness of 761 cd/m2 at a driving voltage of 4.8 V, and current efficiency is 0.75 cd/A. The Commission International de IEclairage (CIE) coordinates of the EL device were found to be (0.62, 0.37) at 10 mA/cm2.