• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.146-151
• /
• 2005

Electromagnetic penetration into an annular aperture in a thick conducting plane is investigated with the integral transform and eigen-function expansion method. The solution is analytic and is represented in rapidly-convergent series which is amenable to numerical analysis. Numerical computations shows that apertures with narrow annular gap have sharp transmit power peaks in frequency response.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.63-69
• /
• 2012

This paper presents the design of a calculable standard dipole antenna with a hybrid balun in the frequency range of 1 GHz to 3 GHz. A new formula of the antenna factor for a dipole antenna with a hybrid balun is derived using the power mismatch-loss concept. The antenna factors derived in this paper are in good agreement with the results calculated from S-parameters. The design results show that the calculable dipole antenna with a hybrid balun can be characterized by power mismatch-loss component factors.

• 한국전자파학회논문지
• /
• 제24권9호
• /
• pp.892-899
• /
• 2013

본 논문에서는 (서브)밀리미터파 대역에서 산란 계수 정밀 측정이 어려운 요인 및 보다 정확한 측정을 하기 위한 방안을 기술하였으며, G-band(140~220 GHz)에서의 측정 사례를 제시하였다. 우선 마이크로파 대역과 (서브)밀리미터파 대역에서 사용되는 산란 계수 측정시스템(벡터회로망 분석기)의 동작 원리에 대한 차이점을 파악하고, (서브)밀리미터파 대역 산란 계수 측정시스템을 보다 잘 운영하기 위한 방안을 기술하였다. 그리고 더 좋은 도파관 전송 특성 및 연결 반복도를 얻기 위한 방안과 반사 계수 크기가 작은 피측정기를 정밀 측정하기 위한 방안을 기술하였다.

• 한국전자파학회논문지
• /
• 제7권4호
• /
• pp.320-327
• /
• 1996

This paper presents that the lossy or amplification property of the Finite Difference-Time Domain(FD-TD) method based on the leap-frog scheme is theoretically verified by using a plane wave analysis. The basic algorithm of the FD-TD method is introduced in order to help understanding the analysis procedure. Since our analysis is formulated by the Von Neumann's approach, the stability inequality is also produced as an another outcome.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 추계학술발표회
• /
• pp.79-90
• /
• 1994

The goal of this research is to get a measuring system for absorption characteristics of electromagnetic wave absorbers in ferrite type which are lat grid-type special type etc. It is however very difficult to measure the absorption characteristics as in low frequency as in 30 MHz, To solve the problem therefore we propose a standing wave method and a measurement method in time domain using parallel striplines construct the measuring system and measure the characteristics of ferrite microwave absorbers in grid type using the proposed measuring system.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.483-490
• /
• 1998

The reflectivity of a grid ferrite electromagnetic wave absorber is analyzed using finite difference time domain (FDTD) method, which is usually used in anechoic chambers for EMI / EMS test. The frequency dispersive characteristics of ferrite medium and its boundary condition are modeled using magnetic flux in addition to E- and H-fields. By applying Floquets theorem, FDTD analysis of the grid ferrite absorber with periodic infinite array is simplified as a unit cell problem. The method of homogenization which is mainly utilized in the calculation of absorber reflectivity as a low frequency technique takes only into account volume fraction of the unit cell of the absorber except for the structure of medium geometry. However, the presented method in this paper can analyze the geometry effect of the unit cell with its medium characteristics up to high frequency region.

• 한국전자파학회지:전자파기술
• /
• 제6권2호
• /
• pp.19-26
• /
• 1995

광대역용 박판 전파흡수체의 설계에는 자성재료가 많이 사용되며, 주로 자성재료 박판의 이면에 금속판을 접착하여 만든다. 이 경우,6개의 변수를 포함하는 한개의 이론식에 의해 무반사 또는 보다 실용적인 99% 이상의 흡수(20dB 전파감소)가 가능한 전파흡수체의 형상과 재료 및 전자파 상수가 정의된다. 2여B 전파감소에 해당 하는 정합 경제값을 계산하기 위하여 Secant법을 적용하였으며, 전파흡수체 설계시 허용 가능한 재료 상수값의 범위를 구하기 위하여 Secant볍을 응용한 search algorithm을 개발하였다. 6개의 변수 모두에게 적용할 수 있 는 이 수치해석 방법에 의해 최소의 반복 계산으로 정확한 값을 효율적으로 구할 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.224-231
• /
• 2015

A comparison of the antenna parameters for R-band (1.7-2.6 GHz) and S-band (2.6-3.95 GHz) standard gain horn antennas has been performed by the Korea Research Institute of Standards and Science (KRISS), together with seven domestic participants from private companies and public institutions. Its purpose, as a proficiency test program of the 'Antenna Measurement Club' of KRISS, was to check equivalences in antenna parameter measurements between KRISS and the participants, particularly in the R-/S-band, to support antenna manufacturers and end users in Korea. The measurement parameters of this comparison are the power gain, radiation pattern, and reflection coefficient of the traveling standards for R-/S-band pyramidal standard gain horn antennas. The comparison used a gain comparison method and an extrapolation method to measure the power gain of the two traveling standards; the radiation patterns were measured in the far-field region of the transmitting and receiving antennas.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1992년도 정기총회 및 추계학술발표회
• /
• pp.2-29
• /
• 1992

According to the increase of occupation density of microwave frequency band on use microwave environments have been congested extensively. For shielding unnecessary electromagnetic wave of preventing the electromagnetic wave reflection a good conductor a low resistive material or a lossy material is mainly used. As a method to measure the absorbing characteristics of microwave absorber the fundamental microwave measuring method can be used. There is however a big problem in measuring errors since the wavelength of microwave is very short especially as in the case as microwave absorber for RADAR. Therefore this research aimed to a converting adaptor of 20mm${\Phi}$ coaxial tube from a Type-N connector to 20mm${\Phi}$ coaxial tube and to use it for designing microwave absorber and evaluating absorbing characteristics. Furthermore the measurements of absorbing characteristics and material constants have performed and reviewed which were carried out by using the coaxial tube in the short type and by using rectangular waveguide respectively As a result the validity of the measured values have been confirmed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.334-338
• /
• 2006

The finite volume time domain(FVTD) method gives accurate results for the calculation of electromagnetic wave propagation but it should be noted that the number of sampling points per wavelength should be increased when more accurate numerical results are required. Moreover it requires large amount of computer memory resources. In this paper we propose a modified FVTD that employs a time subdivision. The local time-subdivided FVTD(FVTD-LTS) method is enough to divide the space domain grid with a large step size. This method can reduce computation time and memory resources. To validate the proposed method, sever numerical examples are presented. We have then shown that the proposed method yields a reasonable solution.