• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.97-105
• /
• 2020

Recently, as the data speed and operating frequencies of Ethernet keeps increasing, electro magnetic interference (EMI) also becomes increasing. The generation of such EMI will cause malfunction of near electronic devices. In this study, EMI filters were applied to reduce the EMI generated by DC-DC SMPS (switching mode power supply), which is the main cause of EMI generation of Ethernet switch. As the EMI filter, MLCCs with excellent withstanding voltage characteristics were used, which had advantages in miniaturization and mass production. Two types of EMI MLCC filters were used, which are X-capacitor and X, Y-capacitor. X-capacitor was composed of 2 MLCCs with 10 nF and 100 nF capacity and 1 Mylar capacitor. Y-capacitor was consisted of 6 MLCCs with a capacity of 27 nF. When only X-capacitor was applied as EMI filter, the conductive EMI field strength exceeded the allowable limit in frequency range of 150 kHz ~ 30 MHz. The radiative EMI also showed high EMI strength and very small allowable margin at the specific frequencies. When the X and Y-capacitors were applied, the conductive EMI was greatly reduced, and the radiation EMI was also found to have sufficient margin. In addition, X, Y-capacitors showed very high insulation resistance and withstanding resistance performances. In conclusion, EMI X, Y-capacitors using MLCCs reduced the EMI noise effectively and showed excellent electrical reliability.

• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.117-130
• /
• 2020

Noises can distort acquired geophysical data, leading to their misinterpretation. Potential noises sources include anthropogenic activity, natural phenomena, and instrument noises. Conventional denoising methods such as wavelet transform and filtering techniques, are based on subjective human investigation, which is computationally inefficient and time-consuming. Recently, many researchers attempted to implement neural networks to efficiently remove noise from geophysical data. This study aims to review and analyze different types of neural networks, such as artificial neural networks, convolutional neural networks, autoencoders, residual networks, and wavelet neural networks, which are implemented to remove different types of noises including seismic, transient electromagnetic, ground-penetrating radar, and magnetotelluric surveys. The review analyzes and summarizes the key challenges in the removal of noise from geophysical data using neural network, while proposes and explains solutions to the challenges. The analysis support that the advancement in neural networks can be powerful denoising tools for geophysical data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.730-736
• /
• 2014

Test standards for electrical and electronic equipment required for ship operations is applying the IEC-60533 standard. However, although a test procedure and a specified regulation are clearly defined in the deck and bridge zone and general power distribution zone, they are not regulated in the special power distribution zone with ship propulsion system. For these reasons, the costs for additional research and development have been invested. In this paper, we was measured power noise in a special power distribution zone in ship and we were compared and analyzed values measured. The actual experiments are performed on the ship of Korea Maritime and Ocean University. As a result, the acquired data on Hanbada shows that loop antenna with low frequency band(160kHz) and ultra log antenna with high frequency band(1.97GHz)occur about 6-8dB differences and about 8.7 difference respectively. Also, the acquired data on Hannara shows that each loop antenna of 1MHz, 11MHz, and 25MHz occurs about 7dB difference about 4-5dB differences respectively. so standard of Special distribution zone must be specified by comparative analysis of data obtained by the experiment more.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.2
• /
• pp.312-319
• /
• 1997

The magnetometer is one of the most important payloads for scientific satellite to monitor the near-earth space environment. The electromagnetic variations of the space environment can be observed with the electric and magnetic field measurements. In practice, it is well known that the measurement of magnetic fields needs less technical complexities than that of electric fields in space. Therefore the magnetometer has long been recognized as one of the basic payloads for the scientific satellites. In this paper, we discuss the scientific fluxgate magnetometer which will be on board the KITSAT-3. The main circuit design of the present magnetometer is based on that of KITSAT-1 and -2 but its facilities have been re-designed to improve the resolution to about 5nT for scientific purpose. The calibration and noise level test of this circuit have been performed at the laboratory of the Tierra Tecnica company in Japan.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.250-256
• /
• 2006

The revision of radio waves act, which took effect on July 1,2005, widened the bandwidth of PLC from $9kHz{\sim}450kHz$ to $9kHz{\sim}30MHz$. This high upper limit of frequency may cause the interference in HF wireless communications. From this point of view, the goal of this research is to suggest the estimation method of whether-or-not the interference occurs and furthermore offer countermeasures to avoid it hereafter. Ministry of Information and Communication Radio Research Laboratory(MIC-RRL)has been researching for the interference and devoting themselves to turn out how much it affects to HF wireless communications since the revision took effect. This research suggests some estimation methods with receivers, signal generators, or SINAD(Signal to Noise and Distortion) Meter which is so suitable for the RF environment that we can overcome the existing limit to the EMC environment. In addition, this research is focused on securing the environment for wireless communications by establishing the safety zone or suggesting the ways to prohibit the use of the bandwidth, which may cause serious interference, in order to minimize the effect of PLC on HF maritime mobile telecommunications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1639-1645
• /
• 2015

In UHD high-speed video transmission system, when a signal within certain frequency region coincides electrically and structurally, the system becomes unstable because the energy is concentrated, and signal flux is interfered and distorted. For the instability, power integrity analysis should be conducted. To remove the signal distortion for MLB, using a high-frequency design technique for EMI phenomenon, EMI which radiates electromagnetic energy fluxed into power layer was analyzed considering system stabilization. In this paper, we proposed an adaptive MLB design method which minimizes high-frequency noise in MLB structure, enhances signal integrity and power integrity, and suppresses EMI. The characteristic impedance for multi-layer circuit board proposed in this study were High-Speed Video Differential Signaling(HSVDS) line width w = 0.203, line gap d = 0.203, beta layer height h = 0.145, line thickness t = 0.0175, dielectric constant ε_r = 4.3, and characteristic impedance Zdiff = 100.186Ω. When high-speed video differential signal interface board was tested with optimized parameters, the magnitude of Eye diagram output was 672mV, jittering was 6.593ps, transmission frequency was 1.322GHz, signal to noise was 29.62dB showing transmission quality improvement of 10dB compared to previous system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.252-260
• /
• 2021

For frailty management, the importance of resistance exercise has been emphasized, and various devices have been developed. Recently, digital weight control technology that converts electromagnetic resistance to a digital weight is attracting attention, but there are no reports confirming the effectiveness and safety of the device for seniors in Korea. This study conducted a biomechanic-based ergonomic analysis of an elderly-friendly exercise device utilized in digital load control technology to suggest a direction for development. Twenty seniors (age: 62.40 ± 2.09 years) were included. The load of the device was classified into three levels, and the muscle activity and heart rate were assessed during three experimental motions. A questionnaire based on the International Organization for Standardization 9241-11 was adopted to evaluate the stability, operationality, efficiency, and satisfaction with the software and device. The program could be divided into three exercise intensities that can be utilized in the field depending on whether the exercise load, muscle activity, and heart rate were consistent. The monitor size needed to be enlarged to make the menu Korean, reduce the device size, and minimize noise. Considering these findings, the development of an advanced age-friendly exercise device by improving the size, display, and noise is suggested.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.71-79
• /
• 2008

This paper analyzed the voltage induction phenomena on the telecommunication lines by electromagnetic coupling from high-speed A.C. electrified railway. The induced common mode voltages and the induced differential mode voltage on the telecommunication line was measured by notified standard method in the regulation of Korea. The test lines consist of 2 separated lines of 20 m and 300 m in influence distance each for comparison, with 2km inducing length. The analysis is made on the induced voltages from the different influence distances and the different earthing points, and also on the waveform and spectrum distributions. It is proved that the induction is arisen so good and the measured values are fair enough against noise such as the earth voltage differencing, and the current measuring scheme is also rightful.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2017

In this paper, we propose a new method for a correlative phase comparison direction finding(DF) which detects the arrival direction of radio waves by data fusing the calculated phase difference and the measured phase difference between the antennas when the radio waves are incident on the circular array antenna composed of 7 antennas respectively. The correlation type phase comparison method uses a uniform circular array(UCA) and a linear array method. The phase difference data calculated formally and the phase difference data measured in the test environment are fused with a correlation function, therefore, it is superior to the currently used phase comparison direction detection method. When the signal-to-noise ratio (SNR) of the received signal is 20dB and the inter-antenna distance to the wavelength of the received signal($L/{\lambda}$) is 0.5, the accuracy of the correlative DF is $1.7^{\circ}$ while measurement phase comparison's is larger than $2.5^{\circ}$, It can be used for electromagnetic signal monitoring and military direction detection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2381-2387
• /
• 2013

This paper deals with an optimal angle error reduction method of magnetic hall sensor using hall effect elements with yoke. The magnetic position sensor is required to generate ideal sine and cosine waveforms from its hall effect elements according to rotation angle for precise angle information. However, the output signals are easy to include harmonics due to uneven magnetic field distribution from disturbance in the vicinity of hall effect elements. Thus, The paper studies a way which makes sine and cosine waveforms robust in disturbance and reduces harmonics by installing a yoke around Hall effect elements. The angle detection simulation for the magnetic hall sensor is performed by 3 dimensional finite element method and Taguchi method, one of the design of experiments. For the Taguchi method, three design parameters related to position of hall effect elements and shape of hall effect element yoke are selected.