• Journal of the Optical Society of Korea
• /
• 제12권2호
• /
• pp.103-106
• /
• 2008

It is shown that the two mode representations, one with vector modes and the other with scalar modes, for the cross spectral density matrices of electromagnetic beams are equivalent to each other. In particular, we suggest a method to find the vector modes from the scalar modes and formulate the cross spectral density matrix as a correlation matrix.

• Journal of electromagnetic engineering and science
• /
• 제9권1호
• /
• pp.1-6
• /
• 2009

An effective method is proposed to suppress the second-order beams(SOBs) that result from the cross-polarized fields of 2D edge slot arrays. By rearranging the conventional sequence of stacking waveguides, the SOBs are shown to be considerably reduced and the 9 dB suppression is obtained. The optimal sequence is obtained from the genetic and exhaustive searches and its effects are verified using near-field measurements as well as theoretical estimation. Since the proposed method requires no additional polarizing structures such as baffles, it is very easy and cost-effective to implement.

• 한국광학회지
• /
• 제2권2호
• /
• pp.74-82
• /
• 1991

서로 마주보며 비춰진 원형편극된 두 $TEM_{00}$ 레이저 광속내에 부양된 균질구에 작용하는 광압분포를 조사하였다. 두 레이저 광속의 간섭효과를 고려하여 광압성분의 해석적 표현이 유도되었으며 정상 평면전자기파의 경우와 비교되었다. 광압분포에 대한 수치해석 결과가 제공되었으며 그 물리적 의미가 논의되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.77-80
• /
• 2008

In this paper the electromagnetic shunt damper was newly employed for vibration suppression of the flexible structures. The electromagnetic shunt damper consists of a coil and a permanent magnet. The ends of the coil were connected to the RLC shunt circuit. The numerical solutions of resonant frequency of the shunt circuits were calculated by using Pspice. The vibration and damping characteristics of the flexible beams with the electromagnetic shunt damper were investigated by tuning the circuit parameters. Also, the effect of the magnetic intensity on the shunt damping was studied with the variation of the gap between the aluminum beam and the permanent magnet. Present results show that the magnet shunt damper can be successfully applied to reduce the vibration of the flexible structures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2109-2109
• /
• 2011

High power microwave sources operating in relativistic regions, high current reletivistic electron beams are obtained by using cold cathodes with the help of explosive emission. For these relativistic devices, the pulsed power and magnetic field systems are very large and heavy. The phase velocity of electromagnetic mode should be showed down close to the beam velocity, ensuring enough beam coupling with electromagnetic modes. By using the annular electron beam, a weakly relativistic oversized bwo consisting of rectangularly corrugated cylindrical waveguide is demonstrated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1089-1092
• /
• 1995

A planar vibratory gyroscope using electrostatic actuation and electromagnetic detection is proposed. The gyroscope has large sensitivity and can be fabricated by using surface micrimachining, bulk micromachining and conventional machining technology. In this paper, the gyroscope and the electromagnetic detecting system equations are derived to determine the output characteristics for the planar vibratory gyroscope using electrostatic acturation and electromagnetic detection. The maximum output is obtained when the driving frequencyequals to the detecting frequency. The resonant frequencies of the resonator are determined by the beam stiffness, i.e. the material constants and spring dimensions. The dimensions of the beams are determined using the analytic vibration modelling. The expected resonant frequencies are 200Hz both and the sensitivity is 62mV/deg/sec with 4000 electronic circuit amplifying coefficient for an AC drive voltage of 3V bias voltage of 15V and DC field current of 50 mA.

• 천문학회보
• /
• 제37권1호
• /
• pp.96.1-96.1
• /
• 2012

Various electromagnetic fluctuations are observed in the upstream of Earth's bow shock. Properties of plasmas are important in determining the development of the fluctuations. In this study we analyze the phase space distribution functions of plasmas measured by the Cluster spacecraft to understand how the fluctuations develop. Plasmas in the upstream of Earth's bow shock often consist of multiple components, especially when the fluctuations exist. In addition to the solar wind beams, backstreaming ion beams and diffuse ions are also often observed separately or simultaneously. The solar wind beams are not much perturbed even within the fluctuations. The diffuse ions are more than 10 times hotter than the solar wind beams and the backstreaming beams intermediate between them. The distribution functions of the diffuse and backstreaming ions are anisotropic to the magnetic field. Thus, they may be responsible for the fluctuations associated with temperature anisotropy. We will discuss about the thermalization processes and the relationship between the fluctuations and plasmas.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.466-467
• /
• 2013

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.130-136
• /
• 2014

본 논문에서는 최근 실리콘 기반의 소자를 이용하여 microwave 대역에서 millimeter wave 대역까지 동작하는 위상 배열 시스템 개발에 관한 연구를 리뷰하고자 한다. 우선 위상 배열 시스템의 중요한 부품인 위상 변위기를 CMOS 공정을 이용한 설계 방법에 대해 논의한다. 그리고 수동형 위상 변위기를 송수신 모듈에 적용하여 한 채널에서 16 채널까지 확장하여 실리콘 칩에 구현을 하였다. 35 GHz 대역에서 동작하는 4 채널 송수신 칩은 200 mW 이하의 저전력 성능을 보여주었다. 또한, 44 GHz 대역에서 16 channel로 확장하여 송신 출력과 선형성을 향상시킬 수 있었다. 능동형 위상 변위기는 Ku band 대역에서 동작하는 2-antenna 4-beam 수신기에 적용하였다. 한 칩에서 4개의 서로 다른 방향의 신호가 존재함으로 신호 간의 커플링을 최소화 하는 방법을 소개하고, 이를 측정을 통해 검증하였다.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.236-241
• /
• 2015

Carbon-coated Ni, Cu and Sn nanocapsules were investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) and a four-point probe device. All of these nanocapsules were prepared by an arc-discharge method, in which the bulk metals were evaporated under methane ($CH_4$) atmosphere. Three pure metals (Ni, Cu, Sn) were typically diverse in formation of the carbon encapsulated nanoparticles and their different mechanisms were investigated. It was indicated that a thick carbon layers formed on the surface of Ni(C) nanocapsules, whereas a thin shell of carbon with 1~2 layers covered on Cu(C) nanocapsules, and the Sn(C) nanocapsules was, in fact, a longger multi-walled carbon nanotubes partially-filled with metal Sn. As one typical magnetic/dielectric nanocomposite particles, Ni(C) nanocapsules and its counterpart of oxide-coated Ni(O) nanocapsules were compared in the electrically conductive behaviors for further applications as the electromagnetic materials.