• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.279-287
• /
• 2002

In this paper, a symmetric microwave lens to steer wide angle and to operate at broad band frequency range for a linear phased array transmitter was designed. To get accurate beam steering performance far a linear phased array transmitter, uniform amplitude transmission characteristics of microwave lens was focused. The measured result for the insertion loss deviation between Input and output ports of microstrip lens with 8 beam ports and 8 array ports was $\pm$3.1 ㏈ over 6~18 ㎓ band, which was very uniform characteristics. Using 8 elements linear array antenna, it was confirmed the radiation beam could be steered over $\pm$60$^{\circ}$ in azimuth. And the measured lens performance data and multi-beam steering pattern were presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.96-99
• /
• 2016

Generally, bistatic clutter, contrary to the monostatic clutter, has nonlinear structure in Angle-Doppler domain due to the noncooperative motion of the transmitter and the receiver. In this paper, we first simulate the bistatic clutter structure resulting from the relative motion of the transmitter and the receiver and then analyze their relations through the bistatic clutter structure in Angle-Doppler domain. Also, we show the operation condition of the transmitter and the receiver leading to low rank of a covariance matrix of the bistatic clutter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1335-1342
• /
• 2010

This paper presents design and measurement result of S-band, $\bigcirc$ kW solid-state transmitter and receiver for active array radar system. Transmitter characteristics show 63 dB gain, 200 usec pulse width(max.), 10 % duty(max.) and 63 dB pulse to pulse stability. Receiver characteristics show 23 dB gain and 3.2 dB noise figure. Receiving mode for pulse network analyzer is used for pulse to pulse stability measurement. Measurement results satisfies all specification.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1454-1468
• /
• 2017

In this study, a new dual-active soft-switching converter is proposed to improve conversion efficiency and extend the load range for an MTEM electromagnetic transmitter in geological exploration. Unlike a conventional DC/DC converter, the proposed converter can operate in passive soft-switching, single-active soft-switching, or dual-active soft-switching modes depending on the change in load power. The main switches and lagging auxiliary switches of the converter can attain soft-switching over the entire load range. The conduction and switching losses are greatly reduced compared with those of ordinary converters under the action of the cut-off diodes and auxiliary windings coupled to the main transformer in the auxiliary circuits. The conversion efficiency of the proposed converter is significantly improved, especially under light-load conditions. First, the working principle of the proposed converter is analyzed in detail. Second, the relationship between the different operating modes and the load power is given and the design principle of the auxiliary circuit is presented. Finally, the Saber simulation and experimental results verify the feasibility and validity of the converter and a 50 kW prototype is implemented.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.530-543
• /
• 2015

Air-cooling method is adopted on the basis of the requirements for the thermal stability and convenient field use of an electrical source transmitter. The power losses of the transmitter are determined after calculating the losses of the alternating current (AC)-direct current (DC) power supply, the constant-current circuit, and the output circuit. According to the analysis of the characteristics of a heat sink with striped fins and a fan, the engineering calculation expression of the Nusselt number and the design process for air-cooled dissipation are proposed. Experimental results verify that the error between calculated and measured values of the transmitter losses is 12.2%, which meets the error design requirements of less than 25%. Steady-state average temperature rise of the heat sink of the AC-DC power supply is $22^{\circ}C$, which meets the design requirements of a temperature rise between $20^{\circ}C$ and $40^{\circ}C$. The transmitter has favorable thermal stability with 40 kW output power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1025-1031
• /
• 2001

In this paper, we derive the outage probability of cellular mobile system with STTB(Space Time Transmitter Diversity) scheme where the received radio signals and interferers experience Rayleigh fading and AWGN. The new probability density function of L independent identically distributed interferers is derived using Laplace transforms. We express the probability of outage as a function of the average-signal to average-interference power ratio and the signal to noise ratio. In addition, the frequency reuse distance which is one of the key parameters in the design of cellular systems is analyzed.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.99-103
• /
• 2010

Motivated by recent works on spectrum-sharing systems, this paper investigates the effects of transmit diversity on the peak interference power limited cognitive radio(CR) networks. In particular, we derive the ergodic and outage capacities of a spectrum-sharing system with multiple transmit-antennas. To derive the capacities, peak interference power constraint is imposed to protect the primary receiver. In a CR transmitter and receiver pair with multiple antennas at the transmitter side, the allowable transmit power is distributed over the transmit-antennas to achieve transmit diversity at the receiver. We investigate the effect of this power distribution when a peak interference power constraint is imposed to protect the primary receiver. We show that the transmit diversity does not improve the ergodic capacity compared to the single-antenna system. On the other hand, the transmit diversity significantly improves the outage capacity. For example, two transmit-antennas improve the outage capacity 10 times compared to the single-antenna with a 0 dB interference constraint.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.802-809
• /
• 2001

A linear power amplifier for the VHF frequency-hopping(FH) transmitter using an adaptive predistortion linearizer is designed. An analog polynomial linearizer as predistorter is employed. The recursive least square(RLS) algorithm is employed in the optimization process to minimize the errors between the predistorter and postdistorter output signals. Experimental results show that the adjacent channel power of the designed power amplifier is reduced by of 10 dB.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.166-170
• /
• 2012

This paper presents a tunable composite right/left-handed (CRLH) delay line for a delay line discriminator that linearizes modulated frequency sweep in a frequency modulated continuous wave (FMCW) radar transmitter. The tunable delay line consists of 8 cascaded unit cells with series varactor diodes and shunt inductors. The reverse bias voltage of the varactor diode controlled the group delay through its junction capacitance. The measured results demonstrate a group delay of 8.12 ns and an insertion loss of 4.5 dB at 250 MHz, while a control voltage can be used to adjust the group delay by approximately 15 ns. A group delay per unit cell of approximately 1 ns was obtained, which is very large when compared with previously published results. This group delay can be used effectively in FMCW radar transmitters.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.503-506
• /
• 2001

When DC voltages from 5 V up to 90 V are applied to a transmitter chip excited by an ultrafast lacer beam, the terahertz electromagnetic pulses and their spectra are changed. The spectrum shifts to the high frequency range when the high DC voltage is applied to the chip. At that time, the signal-to-noise ratio is increased from 250: 1 to 10,000: 1. The spectrum can expand up to 4 THz by optimal realignment of the THz system. Also, two terahertz electromagnetic pulses are generated from a receiver chip when the laser detection beam is reflected to the back side of the chip.