• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.261-261
• /
• 2007

Wearable and ubiquitous micro systems will be greatly growing and their related devices should be self-powered in order to avoid the replacement of finite power sources, for example, by scavenging energy from the environment. With ever reducing power requirements of both analog and digital circuits, power scavenging approaches are becoming increasingly realistic. One approach is to drive an electromechanical converter from ambient motion or vibration. Vibration-driven generators based on electromagnetic, electrostatic and piezoelectric technologies have been demonstrated. Among various generator types proposed so far, piezoelectric generator possesses considerable potential in micro system. To overcome low mechanical-to- electric energy conversion, the piezoelectric device should activate in resonance mode in response to external vibration. Normally, the external vibration excretes at low frequency ranging 0.1 to 200 Hz, whereas the resonant frequencies of the devices are fixed as constant. Therefore, keeping their resonant mode in varying external vibration can be one of important points in enhancing the conversion efficiency. We investigated the possibility of use of multi-bender type piezoelectric devices. To match the external vibration frequency with the device resonant frequency, the various devices with different resonant frequency were chosen. Under an external vibration acceleration of 0.1G at 120 Hz, the device exhibited a peak-to-peak voltage of 2.8 V and a power of 0.5 mw in resonance mode.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.79-94
• /
• 2005

Because the golf swing is very complex movement, it is varied in different gender, skill level, and club. This study measured kinematic variables in golf swing regarding gender, skill level, and club types using FasTrak electromagnetic tracking system. Golf swing kinematics including time variables, linear and angular displacement variables, angular velocity variables were analyzed and compared through three-way ANOVA The results were as follows: 1. In time variables, Female and driver showed longer backswing time than male and iron. Downswing time was longer in female and nonexperts than male and experts. Backswing time over downswing time was longer in experts than nonexperts. Uncocking time was longer in male and experts than female and nonexperts. The differences were statistically significant (p<.05). 2. In displacement variables, Female and nonexperts showed greater backswing head lift than male and experts. Impact head lift was greater in female, nonexperts, and iron than male, experts, and driver. The differences were statistically significant (p<.05). Experts and driver showed greater top hip rotation angle than nonexperts and iron. Top shoulder rotation angle was greater in male, experts and driver than female, nonexperts, and iron. X-factor was greater in male, experts, and driver than female, nonexperts, and iron. Male and experts showed greater backswing hip sway than female and nonexperts. Impact hip sway was greater in male and iron than female and driver. The differences were statistically significant (p<.05). 3. In velocity variables, Experts displayed higher impact hip rotation velocity than nonexperts. Impact shoulder rotation velocity was greater in male and iron than female and driver (p<.05).

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.164-169
• /
• 2020

Use of SiPM has been considered as an alternative to PMT, because of its compact size, low-operating voltage, non-sensitive to electromagnetic, low costs and so on. The main limitation for the use of SiPM is due to its small sensitive area compared to PMT that limits the light collection, and therefore the sensor energy resolution. In this article we studied the effect of increasing the number of SiPM by connecting them in parallel to increase the active detection area. This allowed us to compare the different energy resolution measurements. ¹³⁷Cs has been selected as reference to study the energy resolution for 662 keV gamma-rays. Another investigation was to compare the minimum detectable gamma energy under various SiPM configurations. It has been found that the use of 4 SiPM arrays can greatly improve the energy resolution up to 4% than only one SiPM array, meanwhile use of more than 2 SiPM arrays does not increase the energy resolution significantly. Thus we can conclude that for a large area of cylindrical scintillator (3 × 3 inches), the use of SiPMs are limited to a certain number or certai active area depending on the commercial SiPMs, and its cost should be less than traditional PMT for the cost-effective and compact size considerations. It is well known that the gain of SiPM varies with temperature. In this article, we also calibrated gain to guarantee the same position of photoelectric peak in response of different temperatures.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1097-1102
• /
• 2010

Silver coated copper powders were prepared by a chemical reduction method with controlling the deposition process variables such as the feeding rate of the silver ionic solution and concentration of the reductants at room temperature. The characteristics of the products were evaluated by scanning electron microscope (SEM), X-ray diffractometer (XRD), atomic absorption spectrophotometer (AA) and a 4 probe resistivity measurement system. The optimum condition of the preparation of Ag coated Cu powders was at 0.05 M of potassium sodium tartrate and 2 ml/min of the feeding rate of the silver ionic solution. Our method successfully produced dense, uniform, and well-dispersed Ag coated Cu powder of $2{\sim}2.5{\mu}m$ witha silver layer of 100~200 nm. Additionally, we found that thespecific resistivity of the 30 wt.% Ag coated Cu powder was similar to that of pure silver, so that the composite powder could be used as an alternative electromagnetic shielding material for silver.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.36-41
• /
• 2011

If gas is leaking out of gas pipelines, it could cause a huge explosion. Accordingly, it is important to ensure the integrity of gas pipelines. Traditionally, over the years, gas-operating companies have used the ILI system, which is based on axial magnetic flux leakage (MFL), to inspect the gas pipelines. Relatively, there is a low probability of detection (POD) for the axial defects with the axial MFL-based ILI. To prevent the buried pipeline from corrosion, it requires a protective coating. In addition to the potential damage to the coating by environmental factors and external forces, there could be defects on the damaged coating area. Thus, it is essential that nondestructive evaluation methods for detecting axial defects (axial cracks, axial groove) and damaged coating be developed. In this study, an electromagnetic acoustic transducer (EMAT) sensor was designed and fabricated for detecting axial defects and coating disbondment. In order to validate the performances of the developed EMAT sensor, experiments were performed with specimens from axial cracks, axial grooves, and coating disbondment. The experimental results showed that the developed EMAT sensor could detect not only the axial cracks (minimum 5% depth of wall thickness) and axial grooves (minimum 10% depth of wall thickness), but also the coating disbondment.

• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.1055-1060
• /
• 2020

본 연구는 축소형 항공기의 레이다 단면적 분석 및 측정에 대한 연구이다. 사전에 축소형 항공기에 대한 레이다 단면적 특성을 전자기 해석 툴을 사용하여 분석하고 실제 축소형 항공기를 제작하여 무반사실에서 측정하였다. 측정 시 구모델을 사용하여 RCS 특성의 기준 데이터로 적용하여 실제 축소형 모델의 시험 결과 데이터에 적용하였다. 측정 방법은 시간 게이팅을 적용하여 무반사실 내부에서 산란되는 성분에 대한 영향을 제거하여 측정의 정확성을 향상시켰다. 축소형 모델의 RCS 시험 결과는 사전 해석 결과와 같이 초단파 대역에서 상대적으로 RCS 특성이 높게 측정되었다. 향후 본 연구를 통하여 파장이 상대적으로 큰 VHF/UHF 대역 레이다의 표적에 대한 RCS 분석 및 측정에 대한 특성 기술에 활용할 예정이다.

• 한국방사선학회논문지
• /
• 제15권4호
• /
• pp.565-573
• /
• 2021

인체 내 전자기장의 공간 분포는 고 유전율 재료를 사용하여 비교적 간단하게 조정할 수 있다. 이 방법은 다른 방법에 비해 보완적인 성격이 강하지만 특정 응용 분야에서 강력한 유전체 시밍용 도구로 활용될 수 있다. 기하학적으로 자유로운 형상으로 제조 가능하며 시스템의 어떠한 변경 없이 목적에 따라 제작된 패드를 적용할 수 있다. 특히 초 고자장(ultrahigh magnetic field UHF) MRI에서 높은 작동 주파수로 인해 낮은 감도 (low sensitivity)를 갖는 송신 (B1+) 및 수신 (B1-) 필드의 강도를 높이는 데 사용되는 임상목적의 고 유전율 패드는 잠재적 가치가 상당히 클 뿐만 아니라 그 효과가 클 것으로 예상되는 UHF MRI에 적용된 연구가 적기 때문에 이 연구에서는 티탄산 칼슘의 현탁액으로 제조된 고 유전율 패드를 실험실에서 직접 개발하였으며 UHF 7T 자기공명영상 MRI의 다양한 프로토콜에서 임상적으로 유용한 영상의 신호증가를 확인하였다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2466-2473
• /
• 2023

A superconducting ion-Linac (iLinac), which is supposed to work as the injector in the High Intensity heavy-ion Accelerator Facility project, is under development at the Institute of Modern Physics (IMP), Chinese Academy of Sciences. The iLinac is a superconducting heavy ion linear accelerator approximately 100 meters long and contains 96 superconducting cavities in two types of 17 cyromodules. Two types of superconducting resonators (quarter-wave resonators with a frequency of 81.25 MHz and an optimal beta β = v/c = 0.07 called QWR007 and half-wave resonators with a frequency of 162.5 MHz and an optimal beta β = 0.15 called HWR015) have been investigated. The cavity design included extensive multi-parameter electromagnetic simulations and mechanical analysis, and its results are described in details. The fundamental power coupler and cavity dynamic tuner designs are also presented in this article. The prototypes are under manufacturing and expected to be ready in 2023.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.414-421
• /
• 2023

Infrared radiation (IR) refers to the region of the electromagnetic radiation spectrum where wavelengths range from about 700 nm to 1 mm. Any object with a temperature above absolute zero (0 K) radiates in the infrared region, and a material that transmits radiant energy in the range of 0.74 to 1.4 um is referred to as a near-infrared optical material. Germanate-based glass is attracting attention as a glass material for infrared optical lenses because of its simple manufacturing process. With the recent development of the glass molding press (GMP) process, thermal imaging cameras using oxide-based infrared lenses can be easily mass-produced, expanding their uses. To improve the mechanical and optical properties of commercial materials consisting of ternary systems, germanate-based heavy metal oxide glasses were prepared using a melt-cooling method. The fabricated samples were evaluated for thermal, structural, and optical properties using DSC, XRD, and XRF, respectively. To derive a composition with high glass stability for lens applications, ZnO and Sb₂O₃ were substituted at 0, 1, 2, 3, and 4 mol%. The glass with 1 mol% added Sb₂O₃ was confirmed to have the optimal conditions, with an optical transmittance of 80 % or more, a glass transition temperature of 660 ℃, a refractive index of 1.810, and a Vickers hardness of 558. The possibility of its application as an alternative infrared lens material to existing commercial materials capable of GMP processing was confirmed.