• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.202-211
• /
• 2014

The bulk current injection (BCI) and direct power injection (DPI) method have been established as the standards for the electromagnetic susceptibility (EMS) test. Because the BCI test uses a probe to inject magnetically coupled electromagnetic (EM) noise, there is a significant difference between the power supplied by the radio frequency (RF) generator and that transferred to the integrated circuit (IC). Thus, the immunity estimated by the forward power cannot show the susceptibility of the IC itself. This paper derives the real injected power at the failure point of the IC using the power transfer efficiency of the BCI method. We propose and mathematically derive the power transfer efficiency based on equivalent circuit models representing the BCI test setup. The BCI test is performed on I/O buffers with and without decoupling capacitors, and their immunities are evaluated based on the traditional forward power and the real injected power proposed in this work. The real injected power shows the actual noise power level that the IC can tolerate. Using the real injected power as an indicator for the EMS test, we show that the on-chip decoupling capacitor enhances the EM noise immunity.

• 한국통신학회논문지
• /
• 제24권8B호
• /
• pp.1464-1471
• /
• 1999

EMS(Electromagnetic Susceptibility) 시험 중, RF 복사내성 시험에 사용되는 전력증폭기는 80MHz~1000MHz 대역에서 IEC1000-4-3 규격에 맞는 특성을 가져야 한다. 본 논문은 전력 구동단과 고출력 증폭단으로 광대역 전력증폭기를 구성하였으며 임피던스 추정방법을 근간으로 한 광대역 정합 회로 기술과 출력 역반사로부터 증폭 소자를 보호할 수 있는 부정합 보호 회로 기술을 검토, 고찰하였다. 80HMz~300MHz 대역에서 설계, 제작된 전력 증폭기는 100watts 이상의 출력, 40dB 이상의 이득 및 $\pm$0.3dB의 출력 평탄 특성을 얻었으며, 20dBc 이상의 고조파억압 특성을 얻었다. 본 논문의 광대역 고출력 증폭기는 IECI1000-4-3 규격의 EMS 복사내성 시험에 이용할 수 있겠다.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.383-392
• /
• 2003

It is quite essential that requirements allocation and analysis would be done for the electromagnetic compatibility (EMC) of all units when designing a satellite. Although KOMPSAT-2 inherits relatively large portions of the electrical designs from KOMPSAT-1, it has a new instrument and different combinations of sensors and actuators as well as their driving circuitry. Many requirements for the electromagnetic compatibility were modified and newly allocated for KOMPSAT-2. Naturally, they must be justified through analyses from the early stage of the program. In this paper, the EMC compatibility requirements for KOMPSAT2 are presented and verified for their suitability. In addition, some results, which were obtained from various analyses, are presented and discussed.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.559-564
• /
• 2016

This study examined the malfunction mode of the HCMOS IC under narrow-band high-power electromagnetic wave. Magnetron is used to a narrow-band electromagnetic source. MFR (malfunction failure rate) was measured to investigate the HCMOS IC. In addition, we measured the resistance between specific pins of ICs, which are exposed and not exposed to the electromagnetic wave, respectively. As a test result of measurement, malfunction mode is shown in three steps. Flicker mode causing a flicker in LED connected to output pin of IC is dominant in more than 7.96 kV/m electric field. Self-reset mode causing a voltage drop to the input and output of IC during electromagnetic wave radiation is dominant in more than 9.1 kV/m electric field. Power-reset mode making a IC remained malfunction after electromagnetic radiation is dominant in more than 20.89 kV/m. As a measurement result of pin-to-pin resistance of IC, the differences between IC exposed to electromagnetic wave and normal IC were minor. However, the five in two hundred IC show a relatively low resistance. This is considered to be the result of the breakdown of pn junction when latch-up in CMOS occurred. Based on the results, the susceptibility of HCMOS IC can be applied to a basic database to IC protection and impact analysis of narrow-band high-power electromagnetic waves.

• 자동차안전학회지
• /
• 제8권2호
• /
• pp.30-36
• /
• 2016

According to revolutionary developments in automobile technologies, various electronically controlled components of vehicles are rapidly increasing. A variety of advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) using electrical energy source are increasing, too. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are equipped with more new electronic systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference (EMI) test and an electromagnetic susceptibility (EMS) test. In this paper, in order to investigate the electromagnetic interference in the cabin of vehicle by various electric and electronic components of vehicles, a series of narrowband electromagnetic emission tests are conducted. For comparison, the several digital home appliances (smartphone under charging, laptop compuer and digital camera), which are used a lot in daily lives, are tested.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.51-55
• /
• 2004

With the progress of the electronics industry and radio communication technology, certain problems, such as electromagnetic interference(EMI), have arisen due to the increased use of electromagnetic(EM) waves. International organizations such as CISPR, FCC, and ANSI have provided the standards for the EM wave environment and for the countermeasure of the electromagnetic compatibility(EMC). EM wave absorbers are used for constructing an anechoic chamber to test and measure EMI and electromagnetic susceptibility(EMS). In this paper, we have designed an one-body EM(electromagnetic) wave ferrite absorber, based on the equivalent material constants method for both normally and obliquely incident waves, whose absorption abilities are superior to that of the conventional ones. The fabricated absorber has a thickness of 27.68 mm and shows an absorption ability over 20 ㏈ in the frequency from 30 MHz to 6 ㎓.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.7-14
• /
• 2021

Recently, the amount of electrical and electronic systems is increasing rapidly with the development of advanced vehicles such as ADAS, smart cars, connected cars, automated driving systems. It is necessary to examine the electromagnetic compatibility of vehicles equipped with those systems. The standards and regulations for examination of electromagnetic compatibility have been established and revised according to newly introduced electrical and electronic systems. They are administered in some different international standard associations such as ISO, CISPR, UN/ECE and are somewhat complex and bulky. In the study, the improvements and changes in them are tracked and analyzed chronologically. Research of the history of them will be helpful for understanding progress and forecasting the direction of development.

• 한국인터넷방송통신학회논문지
• /
• 제23권2호
• /
• pp.51-59
• /
• 2023

추적 레이다 시스템은 지상, 함정, 항공기 등에 탑재되어 운용되며 주변의 전자장치들과의 전자기파 간섭에 대한 내성 설계가 필요하다. 특히 함정에 설치되는 추적레이다 및 항공기에 탑재되는 추적레이다의 경우 주변 여러 창치들과 전원 라인과 통신 라인으로 전기적 연결이 되어 있다. 이러한 경우 추적레이다와 연결된 케이블에 의한 전자기파 간섭에 의한 다른 장비들의 오동작을 방지하기 위하여 케이블 연결에 대한 방사규격과 내성규격을 만족해야 한다. 또한 추적레이다에서 생성되어 방사되는 전자기파 잡음이 주변장치에 영향을 주지 않도록 방사 규격 또한 만족해야 하여 주변 장치에서 방사되어 입력되는 전자기파에 대한 내성 규격을 만족 해야 한다. 본 논문에서는 CE, CS, RE, RS를 포함하는 MIL-STD-461G를 만족하기 위한 설계를 제시하고 시험을 통하여 설계 만족에 대하여 설명한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1432-1433
• /
• 2008

Disruption and upset of computer system from intentional unintentional electromagnetic wave is not tenable, if the equipment is used in a security or safety critical application. This paper examines susceptibility of computer network to the HPM. The susceptibility level for PC-systems has been assessed using anechoic chamber. The some failure mode were observed in PC-system. Based on the results, susceptibility of computer network can be applied to database to elucidate the effects of microwaves on electronic equipment.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.36-41
• /
• 2015

With the rapidly increasing and widespread use of electronic and controlling equipment, the control of the electromagnetic (EM) wave environment becomes an important social issue. To solve the electromagnetic compatibility (EMC, both electromagnetic interface and electromagnetic susceptibility) problems, in this paper, we introduce the countermeasure techniques focused on EM wave absorbers for EMC problems in our laboratory at the Korea Maritime and Ocean University. The current technologies related to EM wave absorbers to solve EMC problems will first be described. The prospects of and a design for EM wave absorbers including a smart absorber with a heat radiating function will then be suggested.