• 전기학회논문지
• /
• 제62권4호
• /
• pp.517-522
• /
• 2013

The spurious electromagnetic radiation is generated due to the RF unbalanced current on a conductive cable connecting an electronic device to another. A metamaterial-based filtering geometry with frequency selectivity is suggested to reduce the radiation with a bandgap structure, where the right-handed inductance and capacitance stem from the transmission-like configuration between the cable and the metal protrusion, and the left-handed components come from the narrow cavities. The effect of the structure on the unbalanced current pulse and its spurious radiation is presented in the FDTD-method frame work.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.882-885
• /
• 2002

Assessing the condition of air insulation by measuring electromagnetic wave generated in it by partial discharges gives warning of developing faults and breakdown which may give some bad effects to other thing concerned with it. Electromagnetic wave are taken from UHF antenna with 20k ~ 2GHz frequency range. The signal waveform and FFT(Fast Fourier Transform) results from UHF antenna for PD(partial discharge) generated from two different electrode(needle-plane, needle-needle) configurations are shown and it is processed by using PRPD($\Phi-q-n$ distribution) method. Cumulative pulse sequence during 100 period is compared with PRPD method. This also will show the possibility of making apparent distinction between two PD sources.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1281-1287
• /
• 2015

We report the characteristics and differences of two types of attenuation measurement methods for electromagnetic partial discharge signal in GIS. The pulse method is to measure the attenuated waveforms in time domain and coverts them into frequency domain to get the attenuation spectra of given GIS section. This method simulates the real partial discharge signal. The frequency swept continuous wave method can obtain attenuation spectra directly so that it gives attenuation with low noise floor and simplicity. We show that both methods are effective and exchangeable because the attenuation results measured by two methods have similar trends

• Journal of electromagnetic engineering and science
• /
• 제13권3호
• /
• pp.186-188
• /
• 2013

A triple 2-of-3 pulse repetition frequency (PRF) scheme is presented for medium PRF pulsed-Doppler airborne radars, and a real-time method is developed that searches for optimal or sub-optimal PRF sets according to momentary battle situations. The effectiveness of the real-time search method of PRF sets is demonstrated by the experimental results obtained using simulated data.

• 에너지공학
• /
• 제23권4호
• /
• pp.183-188
• /
• 2014

Solenoid operated electromagnetic control valve (ECV) using in an external variable displacement swash plate type compressor is widely used for air conditioning control system because of its low energy consumption and high efficient characteristics. ECV controls the entire vehicle air conditioning system by means of a pulse width modulation (PWM) system that supplied from an external controller. Different pressure ports located within ECV has important functions to control the air/refrigerant flow through its internal passages. The flow paths are preciously maintained with acceptable ranges of leakage (gap) between the parts inside it which is followed by effective design and critical dimensioning of its internal features. Therefore, it saves energy losses from the solenoid operation as well as ensures the balance of forces within it. The research paper highlights analysis of the leakages (at different pressure ports) and dimensioning tolerance factors that affects the ECV performance.

• 한국전자파학회논문지
• /
• 제27권6호
• /
• pp.539-544
• /
• 2016

본 논문에서는 위상비교모노펄스에서 근접한 두 표적의 위치를 추정하는 방법을 제시하였다. 제안한 방법은 Sherman의 기법을 근간으로 하기 때문에 기존 다른 기법들과 달리 단일표적상황에서도 사용할 수 있으며, 오직 단일 펄스만을 사용하여 근접한 두 표적의 위치를 추정하기 때문에 기존 Sherman이 제시한 기법의 단점도 개선할 수 있었다. 제안한 방법의 각도 추정 정확도는 시뮬레이션을 통해 증명하였다.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.507-513
• /
• 2002

본 논문에서는 헤테로다인 방식을 이용한 9.4 GHz 대역의 펄스레이다용 수신기를 설계 및 제작하였다. 펄스레이다용 헤테로다인 수신기에서 큰 부피를 차지하던 IF 증폭기를 제거하고 기저대역 부분에서 검출 로그 비디오 증폭기(Detecter logarithmic video amplifier)를 사용하여 소형화시켰으며 높은 선형 영역과 높은 수신감도를 얻도록 하였다. 측정결과, 최소수신전력 -70 dBm과 선택도 55 dB를 얻었다

• 한국전자파학회논문지
• /
• 제14권11호
• /
• pp.1121-1126
• /
• 2003

본 논문에서 트랜지스터를 이용하여 Ultra Wide Bandwidth(UWB)통신 시스템의 구성 요소의 하나인 임펄스 발생기를 설계하였다. 이 펄스 발생기는 두 가지 스텝으로 이루어져 있다. 첫 번째 스텝에서 트랜지스터 스위칭 동작과 스위칭 동작에 걸리는 시간을 이용하여 트랜지스터의 가우시안 펄스를 만든다. 두 번째 스텝에서 고 대역 통과 필터를 이용하여 모노싸이클 임펄스로 변환시킨다. 결과인 임펄스의 크기는 약 +/-250 ㎷ 정도이고, 펄스의 폭은 0.9 ns로서 펄스폭은 트랜지스터의 동작 시간과 일치하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.406-410
• /
• 2012

This paper looks into the field inside the wide rectangular box structure that is excited by the High Power Electromagnetic(HPEM) source as a potential threat to electric grid and communication networks causing malfunction or destruction. The rectangular box is assumed power/ground planes and its internal field is calculated by the cavity model with the lightning strike excitation as an HPEM pulse. The accuracy of the calculation method employed here is validated through a $156mm{\times}106mm{\times}508{\mu}m$ parallel metallic plate case which is manufactured and tested, and is applied to the size of a building. With the help of the cavity model that takes into account loading, the level of the electric field is shown to decrease when a metal pillar is loaded between the power and ground planes.

• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.730-736
• /
• 2013

항공기용 펄스 도플러 위상 배열 레이더에 관한 시간 영역에서의 클러터 생성 모델을 제시한다. 구형의 지구라는 가정에서 클러터 패치의 기하학적 위치를 고려하여 시간 영역의 지표면 클러터 신호를 생성하였으며, 부배열 단위로 클러터 신호를 생성하였다. 이렇게 생성한 부배열 단위의 클러터 신호는 DBF(Digital Beamforming), ABF(Adaptive Beamforming), STAP(Space-Time Adaptive Processing) 등의 다양한 레이더 응용에서 시뮬레이션 입력 신호로 사용되어질 수 있다.