• 제어로봇시스템학회논문지
• /
• 제15권6호
• /
• pp.573-580
• /
• 2009

In this paper, we develop a functional test model for magnetic bearing wheels. The functional test model is an electromagnetic levitation system that has three degree of freedom, which consists of one axial suspension from gravity and two axes gimbaling capability to small angels. A nonlinear controller with high-gain observers is proposed and the real-time experiment results show that the rotor is accurately levitated at the desired position and well-balanced, which is a suitable result for the potential use an magnetic bearing wheels. Also, the proposed scheme exhibits better performance when it is compared with the conventional PID control method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2492-2494
• /
• 2004

A system, featuring the electromagnetic levitation actuator for control in the vertical direction, of active microvibration control was proposed. The main components of this system are a vibration isolation table with built-in acceleration sensors for detecting microvibration, electromagnetic levitation actuators with built-in permanent magnets and electromagnets, and a digital controller with high precision signal converters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.316-320
• /
• 1993

Electromagnetic suspension (E.M.S) type levitation system is studied in the control system design viewpoint. Dynamic characteristics in theoretical analysis as well as hardware implementation is considered. Open loop unstable, non-linear and timevarying characteristics are reviewed in the theoretcal section, while levitation control system for multi-vehicle train as well as magnet drive system is reviewed in the practical section. This paper suggests not only some well-known problem appearing in levitation control system design but also a subtle problem and solution candidates. But there exist many unmentioned problems wating for a smart problem solver.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.37.6-37
• /
• 2001

In this paper, a robust levitation controller for an attractive MAGLVE system is designed. The design of an H$\infty$ controller based on LMI method is proposed for the control of a simple magnetic levitation system. Attractive MAGLEV system is highly nonlinear and open-loop unstable, and has a very restricted equilibrium region, Also, this system has to tolerate various disturbances caused by propulsion. Thus a robust feedback controller is needed to control the system efficiently. We first formulate a mathematical model for the single magnet levitation system. Then we set up an H$\infty$ control problem as a mixed sensitivity problem where the augmented plant is constructed with frequency weighting function ...

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.145-159
• /
• 2006

This paper describes the development of a clustering based fuzzy controller of an electromagnetic suspension vehicle using gain scheduling method and Kalman filter for a simplified single magnet system. Electromagnetic suspension vehicle systems are highly nonlinear and essentially unstable systems For achieving the levitation control of the DC electromagnetic suspension system, we considered a fuzzy system modeling method based on clustering algorithm which a set of input/output data is collected from the well defined Linear Quadratic Gaussian(LQG) controller. Simulation results show that the proposed clustering based fuzzy controller methodology robustly yields uniform performance with adequate gap response over the mass variation range.

• 연구논문집
• /
• 통권26호
• /
• pp.5-14
• /
• 1996

Test results of electromagnetic suspension (EMS) type urban transit maglev system are reported. Electromagnetic levitation system is a transportation system taking advantage of the attraction of normal conducting electromagnets to support and guide the train in combination with the linear induction traction motors. Urban Transit Maglev (UTM) Which is being developed by the maglev team in KIMM and the Hyundai Precision Company since 1995 consists of three bogies. In the first year, two types of Bogies are developed. Bogie I uses an analog controller for levitation and guidance control and is driven by two linear induction motors (LIM) mounted on the right and left side of module. Bogie II uses a digital controller and is driven by one LIM mounted along the center line of the bogie. Test results reported in this paper are those obtained with Bogie II with a digital controller. Also included in this paper is a brief explanation of the electromagnetic suspension levitation system which is being developed by the maglev team in KIMM.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1299-1304
• /
• 2016

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.11-15
• /
• 2013

These days, the quality of goods is required to improve in the process of manufacturing the semiconductor through the short working hours and clean transportation. The non-contact transport device using magnetic levitation can be a solution in the manufacturing process. The non-contact transport device, using electromagnetic actuation, is the system that can actually transport them by only using attraction force from the electromagnetic source without authentic contact. Moreover, the system using electromagnetic force has a substantial number of benefits ranging from unrestricted design to unlimited expansion. Especially, the price is competitive. The non-contact transport device, using electromagnetic force, has another merits in controlling by giving the same amount of attraction force to ferromagnetic body. By controlling the currents given to coil, the operator is able to decide the direction of the transportation. In order to design the optimal system, we implemented five different things such as the presence of the links below the electromagnetic, the electromagnet changes due to coupling method, the change according to the thickness of the links below electromagnet, due to changes in between electromagnetic distance direction, and the size of the current. Through simulations and the optimum design, it seems to control easily and figure out the exact size of power. It might definitely be the non-contact transport that can sharply reduce tiny scratches and particles in the process of manufacturing the semiconductor.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.118-126
• /
• 2008

The levitation stability of a Maglev vehicle utilizing electromagnetic suspension is primarily influenced by the deformation, roughness, and vibration of the guideway. Optimum design for both the vehicle and the guideway is desirable in order to reduce guideway construction cost, while meeting requirements for stability and ride quality. This paper presents an analysis of the levitation stability of the UTM-01, an urban Maglev vehicle, using a numerical simulation. The ODYN/Maglev, a dynamics analysis program, is used to simulate dynamics to evaluate the stability. A running test of the UTM-01 is also carried out to verify the results of the simulation. Using the simulation results, the levitation stability of the UTM-01 can be numerically analyzed at a variety of vehicle speeds.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.974-978
• /
• 2007

In this paper, the requirements of passive levitation for nonmagnetic body in magnetic fluid are investigated. The passive levitation system includes the electromagnetic system composed of two hollow solenoids, the magnetic fluid and the nonmagnetic body made of aluminum. The hollow solenoids generate nonuniform magnetic fields, leading to the gradient of the magnetic field in magnetic fluid. Hence, the resultant magnetic body force in magnetic fluid is used to levitate the nonmagnetic body in the opposite direction of the gravitation. The levitation conditions according to applied current and the mass of the nonmagnetic body are obtained analytically.