• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1957-1959
• /
• 2004

In this paper, maxwell 3D finite element analysis program was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 2.56[MHz] and some specific conditions.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권3호
• /
• pp.110-116
• /
• 1999

This paper describes the effect of eddy currents in the rotor steel shell of exterior-rotor permanent magnet BLDC motor of which rotor is revolving at a high speed. A two-dimensional time-stepping finite element method is used for analyzing electromagnetic field and computing performances of the motor. As a result the effect of the eddy currents in the rotor steel shell is shown by comparing the analysis results from both the proposed method and the conventional one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.846-848
• /
• 2001

In this paper, electromagnetic fields of a linear induction motor with cage-type secondary are analyzed by the finite element method. Contact resistances between end-bars and secondary conductors are considered in the finite element analysis. The field quantify is a magnetic vector potential transformed into a phasor form. As a result, the sensitivities of a phase current thrust and normal force are presented according to the variation of the contact resistance.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1336-1343
• /
• 2005

The detection mechanism of the flaw for the nondestructive testing using eddy current is related to the interaction of the induced eddy currents in the test specimen with flaws and the coupling of these interaction effects with the moving test probe. In this study, the two-dimensional electromagnetic finite element analysis(FEM) fur the eddy current signals of the aluminum plate with different depth of surface cracks is described and the comparison is also made between experimental and predicted signals analyzed by FEM. In addition, the characteristics of attenuation of the eddy current density due to the variation of the depth of a conductor are evaluated. The effective parameters for the application of eddy current technique to evaluate surface cracks are discussed by analyzing the characteristics of the eddy current signals due to the variation of crack depths.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.15-17
• /
• 1995

This paper presents compression algorithm of a system matrix for electromagnetic analysis by the finite element method. Generally the solution of the finite element analysis is the more accurate the more number of nodes. The memory of a computer limit to number of nodes. Therefore it is needed the technique of compress the system matrix. This algorithm is useful to handle non-zero-terms that can be generated during the application of boundary condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.24-27
• /
• 2005

The NDT(Non-Destructive Testing) is valid fur the defect detection of rolling stocks because it can be used to detect defects in invisible places. For example, in case of wheelsets fatigue cracks are initiated in the wheel seat that suffers from fretting fatigue damage. But the conventional ICFPD method can not be applied to detect such cracks in press-fit area of the axle by some technical problems. In this study, we introduced a new ICFPD (Induced Current Focusing Potential Drop) method that can be applied in press-fit area of the axle. And we performed the finite element analysis of the new ICFPD method using measured electromagnetic properties of the wheel and axle. It seems that our approach is very useful f3r the detection of defects in invisible places.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.476-483
• /
• 1999

In this paper, electromagnetic forces acting on the rotor surface of a BLDC motor for hard disk drive are calculated by the finite element field analysis. The frequency characteristics of torque ripple, local force and unbalanced magnetic force as a source of mechanical vibration area analyzed. Ring-type permanent magnets for the brushless DC motor are apt to have different magnetization levels at each pole because of the unbalanced air gap between the magnet surface and the magnetizer fixture during the multi-poles magnetizing process. This paper discusses the effect of the unsymmetric magnetization distribution in the permanent magnet on the brushless DC motor performances. As a result, the unbalanced magnetic force acting on the rotor surface and the torque ripple are examined for the motor with an unsymmetric magnetization distribution, and compared with those of an ideally symmetric motor.

• 한국전산구조공학회논문집
• /
• 제28권2호
• /
• pp.123-130
• /
• 2015

본 논문에서는 전자기파에 대한 수치적 파동흡수 경계모델인 Perfectly-Matched-Layer(PML)를 개발하고 PML을 연동시킨 유한요소법에 의해 콘크리트 구조물을 통과하는 마이크로파의 전파거동을 해석하는 수치적 기법을 제시한다. 콘크리트 부재와 공기로 구성된 무한매질을 PML을 경계로 하는 유한영역으로 치환하고, 이 유한영역에서 평면 전자기파에 대한 시간 영역 맥스웰방정식의 수치 해를 혼합유한요소법에 의해 계산하였다. 공기로만 이루어진 균일매질의 경우와 콘크리트 구조물이 존재하는 비균일 매질의 경우에 대하여 단일주파수 및 복합주파수를 갖는 마이크로파의 전기장을 계산하였고, 오차분석을 위해 $L^2$-놈 형태로 표현되는 정해와 수치 해의 상대오차를 정의하여 수치 해의 정확도를 평가하였다. 이 연구는 마이크로파를 이용한 철근콘크리트 구조물의 건전도평가 및 손상평가에 적용될 수 있다.

• Interaction and multiscale mechanics
• /
• 제1권4호
• /
• pp.467-476
• /
• 2008

In this work, a nano-size rocksalt crystal (magnesium oxide) is considered as a continuous collection of unit cells, while each unit cell consists of discrete atoms; and modeled by a multiscale concurrent atomic/continuum field theory. The response of the crystal to an electromagnetic (EM) wave is studied. Finite element analysis is performed by solving the governing equations of the multiscale theory. Due to the applied EM field, the inhomogeneous motions of discrete atoms in the polarizable crystal give rise to the change of microstructure and the polarization wave. The relation between the natural frequency of this system and the driving frequency of the applied EM field is found and discussed.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.283-288
• /
• 2013

This paper presents structural topology optimization that is being applied for the design of electromagnetic vibration energy harvester. The design goal is to maximize the root-mean-square value of output voltage generated by external vibration leading structures. To calculate the output voltage, the magnetic field analysis is performed by using the finite element method, and the obtained magnetic flux linkage is interpolated by using Lagrange polynomials. To achieve the design goal, permanent magnet is designed by using topology optimization. The analytical design sensitivity is derived from the adjoint variable method, and the formulated optimization problem is solved through the method of moving asymptotes (MMA). As optimization results, the optimal location and shape of the permanent magnet are provided when the magnetization direction is fixed. In addition, the optimization results including the design of magnetization direction are provided.