• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.128-131
• /
• 2000

This paper describes design for dual-linear polarization antenna using EMC(electromagnetic-coupled) dipole. EMC dipole has a simple element structure and it is fed by microstrip line. Vortical and horizontal polarization are determined by structure of dipole fed by microstrip line. FDTD Method is used for an analysis of antenna element. Length, width, height and offset of dipole are designed for 1-element antenna. Resonant length of diploe differs from the calculated value by a formula because of coupling effect of dipole and feed line. Radiation Power is controlled by the offset of dipole. In prectical fabrication of antenna array, a constant height of dipoles is required. Therefore, the teflon plate with height of 0.8 mm is considered in antenna element design for the vertical polarization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2954-2965
• /
• 1996

In this paper, the electromagnetic field characteristics of leaky caxial cable are anlyzed by using the finite difference-time domain(FDTD) technique. Finite difference equations of Maxwell's equations are definedin cylindrical coordinate systems. To simulate the open boundary problem like a free space, the Mur's Absorbing Boundary condition(Mur-ABC) is also used. After modeling the leaky coaxial cable with the three dimensional grid structure, the transient response of the field distribution and the current distribution, the field pattern, the coupling effect are depicted in the time domain.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.79-82
• /
• 2000

본 논문에서는 Re-entrant mode 결합기를 이용하여 결합도가 향상된 다층 마이크로스트립 구조 결합기를 제안하였다. 제안된 구조는 결합이 이루어지는 두 전성선로의 위층, 아래층 양면에 부동 도체를 위치시킨 형태이며, 이는 기 모드 정전용량의 증가로 인해 높은 결합도를 얻을 수 있고 각 모드별 유효 유전율의 차이가 크지 않기 때문에 정재파비, 격리도, 위상차등에서도 향상된 특성을 얻을 수 있다. 따라서 이는 강한 결합이 필요한 다단 결합기나 광대역 결합기에 사용될 수 있다. 제안된 결합기의 설계를 위해 우 기 모드 해석 방법을 이용하여 임피던스, 유효 유전율, 결합계수 등을 계산하였으며 시뮬레이션과 제작을 통해 이의 타당성을 확인하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.157-160
• /
• 2002

In this paper, a novel lumped equivalent circuit for a conventional parallel directional coupler is proposed. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even-and odd-mode properties of a parallel-coupled line. By using the derived design formula, we have designed the 3㏈ and 10㏈ lumped element directional couplers at the center frequency of 100Mhz. Furthermore, a chip type directional coupler has been designed to fabricate with multilayer configurations by employing the Low Temperature CofiredCeramic (LTCC) process. Designed chip-type directional coupler has a 10㏈-coupling value at the center frequency of 2㎓. Excellent agreements between simulations and measurements on the designed directional couplers show the validity of this paper

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.177-181
• /
• 2002

In this paper, the cancellation or suppression of the feedback interference from Tx antenna using the same frequency is studied. The major problems on the wireless communication system using the same frequency or on-frequency repeater (OFR) are the coupling and isolation between Rx and Tx antenna. In order to increase the isolation between Rx and Tx antenna and to Prevent the self-oscillation of the receiver system, this paper is verified the possibility of the application of interference cancellation system and proposed the design method of the OFR using interference cancellation system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.663-668
• /
• 2003

In this paper, a CPW fed slot antenna with novel broadband feed structure is presented. To enhance the impedance bandwidth of the slot antenna we proposed the broadband feed structure of new bow-tie slot which is combined with four λ/2 rectangular radiation slot and inductively coupled. The measured 10 dB impedance bandwidth is about 60 %(5.2∼9.4 GHz) and the simulated antenna gain is about 6 dBi at 7.36 GHz.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.146-147
• /
• 2000

The electromagnetic wave scattering from active objects has only recently attracted attention.$^{(1).(3)}$ Theoretical studies have considered normal-incidence plane-wave interactions with active dielectric cylinders with the prediction of large enhancements in the scattered field for bound mode structures. According to the theory of the electromagnetic wave scattering from a dielectric cylinder, the eigenvector solutions are discrete and have both guided (non-radiative) and leaky (radiative) mode solutions. By using an anti-guiding (leaky) structure instead of a guided structure and scattering at oblique incident angles near critical angle, the scattering resonances predicted by theoretical studies were obtained for the first time. A fine-grained scan of the plane-wave incident angle a reveals the existence of discrete scattering resonances. The diameter and real part of the index of refraction determine the resonant conditions and the imaginary part of the refractive index has a threshold value to make mode up for its radiation loss. The cross coupling between transverse electric (TE) and transverse magnetic (TM) modes is clearly detected for both active and passive scattering as theoretically expected. (omitted)

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.49-52
• /
• 2001

본 논문에서는 몬테카를로 기법 및 최소결합손실(MCL : Minimum Coupling Loss)기법을 기반으로 하여 무선통신 서비스간 보호비를 만족시키도록 최적의 보호대역을 자동으로 설정할 수 있는 알고리즘을 개발하고 그 견과를 기술하였다. 여기서 개발된 보호대역 자동 설정 알고리즘은 통계적인 몬테카를로 기법 및 간섭원과 대상 수신기 사이에 간섭이 존재하지 않도록 요구되는 이격도 계산을 위한 최소결합손실기법을 적용하여, 주어진 간섭보호비를 만족할 수 있는 최악의 상황에 대한 보호대역을 먼저 설정한 후 보호대역값을 변화시키면서 희망 수신기에서의 간섭확률을 계산을 통해 최적의 보호대역을 설정할 수 있다. 이 기법은 어떠한 형태의 무선통신 서비스에 대해서도 동시에 두가지의 간섭원이 영향이 미칠 경우에도 적용할 수 있도록 설계되었다. 또한 본 연구에서는 TDD시스템간의 간섭 시나리오를 설정하고, 개발된 보호대역 자동 선정 알고리즘을 사용한 시뮬레이터와 ITU-R에서 개발된 SEAMCAT에 의해 얻어진 보호대역 도출 결과를 비교, 분석함으로써 개발된 알고리즘의 신뢰성을 검증하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.188-192
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic (LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. The bandpass filter size is $2.0 mm{\times}1.2 mm{\times}0.8 mm$. Positioning of attenuation polefrequency, importance parameter for a performance of filter, is discussed using even-odd mode analysis by tuned capacitance of coupling capacitor and those results is implemented to LTCC filter circuit. Measured filter performances show that the insertion losses are -4.5dB, -4.1dB at 2.45GHz, 2.75GHz and the return losses are -8.5dB, 8.7dB.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.428-431
• /
• 2003

In this paper, distances between elements are optimized for low sidelobe level (SLL) microstrip patch array using Genetic Algorithms. Genetic Algorithms are "global" numerical-optimization methods, it's advantages are very simple coding and fast optimization. This paper show how to optimize the maximum SLL using Genetic Algorithms. In the results, although mutual coupling is neglected, it's maximum SLL is 3.5 dB lower than Uniformly Spaced Array(distance=$0.5{\lambda}$).