• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.175-178
• /
• 2010

In this paper, a millimeter-wave multi-beam antenna is studied by rotating the antipodal linear tapered slot antenna(ALTSA) with respect to a center is successfully designed. In order to lowering the SLL and enhancing the isolation between the ALTSA elements, a row of metallic via is inserted between the ALTSAs. A 9 beams antenna is designed and experimented at Ka band. The measured and simulated results agree well with each other. The antenna can provide horizontal wide angle coverage up to ${\pm}62^{\circ}$. The gain of each beam can achieve about 12.5 dB. The mutual coupling between ports is all below 20 dB.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1329-1335
• /
• 2009

This paper presents the flow characteristics in the fluid circulation loop using the tubular type linear induction motor(TLIM) electromagnetic pump. A TLIM pump was designed using the equivalent and genetic algorithm for the flow system of 40[1/min]. The flow characteristics are analyzed by coupling the Maxwell equations with the Navier-Stokes equation. The analysis algorithm also takes account of the effects of the thrust. The flow characteristics are analysed with the proposed method and compared with the commercial program and experiment and discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2127-2130
• /
• 2008

In this paper, a tunable bandpass filter with mutual inductive coupling circuits is newly designed and demonstrated for UHF TV tuner ranged from Ch.14(473MHz) to Ch.69(803MHz) applications. Conventional HF tuning circuit with an electromagnetic bandpass filter has several problems such as large size, high volume and high cost, since the electromagnetic filter is comprised of several passive components and air core inductors to be assembled and controlled manually. To address these obstacles, peaking chip inductor was newly applied for constructing the mutual inductive coupling circuit. The proposed circuit was newly and optimally designed, since the chip inductor showed lower components Q-value than the air core inductor. A varactor diode has been also used to fabricate the proposed tunable bandpass filter for RF tuning circuit. The fabricated tunable filter exhibited low insertion loss of approximately -3dB, high return loss of below -10dB, and large tuning bandwidth of 330MHz.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.413-415
• /
• 2000

마이크로스트립 안테나의 일반적인 특징중의 하나는 좁은 대역폭이다. 이 좁은 대역폭은 안테나의 입력 임피던스에 의해서 제한될 뿐 방사 패턴이나 이득의 변화에 의해서는 아니다. 그래서 안테나에서 결합계수를 조절하여 over-coupling을 만든 후 임피던스의 허수성분을 제거하는 경합회로를 사용하여 안테나의 임피던스 대역폭을 증가 시켰다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.180-183
• /
• 2001

본 논문에서는 N개의 평행 결합선로를 이용한 3dB 결합기를 해석하였으며, 유도된 식에 의하여 최소의 단수와 크기로 3dB 결합기를 설계하였다. 기존의 Spectral Domain상에서 N단 평행 결합선로의 복잡한 관계식 유도를 S 파라미터 관계식으로 간단히 유도 하였으며, 유도된 식의 타당성을 위해 실제 제작 검증하였다. 제작된 결합기는 Loose coupling의 평행 결합 선로의 광대역 특성을 그대로 이용하기 때문에 Lange Coupler와 같은 높은 임피던스와 Tight coupling을 구현 할 필요가 없으며, wire bonding도 용이하게 된다. 최소의 단수로 구현하기 위해 RT/Duroid의 R06006과 같은 높은 유전율과 두꺼운 기판을 사용하여 2단으로 3dB 구현이 가능하게 하였다. 제작결과 3.6GHz에서5.5GHz로 대략 42%(0.5dB imbalance) 정도의 광대역특성을 가지고 위상오차도 1$^{\circ}$내외의 결합기를 구현할 수 있었고 격리도 특성 또한 대역 내에서 15dB 내외의 특성을 보였다.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.166-172
• /
• 2001

A novel RF tunable bandpass filter structure using dielectric resonators and varactor diodes is considered for the optimization to achieve constant bandwidth with minimum passband insertion loss. The coupling between resonators is realized by coupling windows and series lumped L, C elements are used to realize the input/output stage couplings. A 5 poles, 0.01 dB ripple Chebyshev type filter tuned from 800 MHz~900 MHz is designed and presented in this paper. The passband bandwidth for the design is 10 MHz (fractional bandwidth = 1.2 %). Experimental results show that the 3 dB passband bandwidth variation is 12.04 MHz~12.16 MHz (less than 1 %) and passband insertion loss is 15 dB~7 dB depending on the tuning voltages.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.190-194
• /
• 2007

In this paper, a cross-coupled microstrip combline bandpass filter using stepped-impedance resonators(SIRs) is proposed. In order to improve the selectivity as well as the insertion loss, the SIR configuration is used. The cross coupling is also introduced to enhance the selectivity. The improvement of the insertion loss is demonstrated not only by deriving the quality factor of the SIR but through the measured performances. Both the proposed and the conventional combline bandpass filter with 5 % of fractional bandwidth at 2 GHz were fabricated and tested. Compared to the conventional combline bandpass filter, the proposed one exhibits the improved selectivity as well as the lower insertion loss characteristics.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.224-230
• /
• 2010

Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.415-418
• /
• 2014

This paper presents an equivalent circuit model for a dumbbell-shaped defected ground structure (DGS) in a microstrip line. The effects of equivalent circuit elements of a dumbbell-shaped DGS and their magnetic coupling to the host transmission line are modeled as a simple lumped-element circuit. In addition, simple approximate expressions to determine the main circuit parameters for this model are presented. The transfer characteristic calculated by the proposed circuit model is compared with the results of EM simulation and measurement.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.56-62
• /
• 2004

We present a multi-Gbit/s digital I/O interface based on RF-modulation and capacitive-coupling over an impedance matched transmission line. The RF-interconnect(RFI) can greatly reduce the digital switching noise and eliminate the dc power dissipation over the channel. It also enables reduced signal amplitude(as low as 200 ㎷) with enhanced data rate and affordable circuit overhead. This paper addresses the system advantages and implementation issues of RFI. A prototype on-chip RFI transceiver is implemented in 0.18-${\mu}{\textrm}{m}$ CMOS. It demonstrates a maximum data rate of 2.2 Gbit/s via 10.5-㎓ RF-modulation. The RFI can be very instrumental for future high-speed inter- and intra-ULSI data links.