• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1311-1320
• /
• 2003

This paper proposed the estimating method of electromagnetic dosimetric reliability at in-vivo and in-vitro experiments. For more accurate consequences of these researches, we have tried to find out any correlations among output power, power density and specific absorption rate(SAR) with the results of in-vivo, in-vitro tests and SAR reports of cellular phone and PDA. In the case of in-vivo tests, the power density has close statistical correlations with SAR value and in the event of in-vitro tests, the output power has considerable statistical correlations with SAR containing duty factor. We analysed the coefficient of determination to estimate the dosimeoic uncertainty. If we use this method before evaluating techniques of measurement and analysis at both in-vivo and in-vitro experiments, we will conduct more accurate reliability test.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1136-1141
• /
• 2007

In this paper, we designed and fabricated EM wave absorbers using Sendust, $Al(OH)_3$ and CPE(Chlorinated Polyethylene). We compared the absorption properties of samples containing 0 wt.%, 3 wt.%, 5 wt.%, 7 wt.% of $Al(OH)_3$. The optimized composition ratio of $Al(OH)_3$ is 5 wt.%, and the absorption property curve just has the tendency to improve at 5 wt.% of $Al(OH)_3$. And we used this characteristics to design the double-layered EM wave absorber. The double-layered EM wave absorber has thickness of 2 mm and has absorption ability more than 18.5 dB at a wireless LAN frequency band using 2.4 GHz.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.231-240
• /
• 2020

Countries around the world have already taken direct and indirect measures to warn of the harmful effects of mobile phone electromagnetic waves. On the other hand, in the Republic of Korea the installation of Wi-Fi has been expandedwithout restrictions by location, and there is a widespread atmosphere of protesting human rights violations even if young students cannot use mobile phones, ignoring problems caused by the use of mobile phones. Human brain cells are increasingly exposed to electromagnetic waves of mobile phones as the penetration rate of smartphones grows.In order to solve the long-lasting question of whether electromagnetic waves from mobile phones will harm the human body, many studies are being conducted in various countries around the world, andthe recently published findingshave warned of the potential for harm. The labeling of electromagnetic waves alone is not sufficient to raise awareness about the dangers of electromagnetic waves. It is necessary that the Republic of Korea organize and operate a national electromagnetic wave research center in line with its status as an IT powerhouse, along with the revision of the Radio Wave Act, which directly warns the public about the hazards of mobile phone electromagnetic waves and can directly impose obligations on the mobile phone industry.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.19-26
• /
• 1995

The design of broad-band, thin layer electromagnetic wave absorbers usually employs magnetic materials. The common absorber consists of a magnetic material layer bonded to a metal plate at the back. For such structure, a theoretical expression involving six parameters defines the allowable material shape and values of electromagnetic parameters that will produce zero reflection or more practically more than 99% absorption (20dB attenuation). The Secant Method was employed to compute the matching boundary values corresponding to 20dB attenuation. In addition, a search algorithm coupled with the Secant Method was developed to obtain allowable range of material parameters for the design of wave absorbers. These numerical methodes applicable to any six parameters effectively yielded accurate solutions in the least iterations.

• Journal of Magnetics
• /
• v.13 no.3
• /
• pp.92-96
• /
• 2008

There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.15-23
• /
• 2024

In order to avoid the high observability due to the cavity resonance or electromagnetic wave leakages from the bridge of a battleship or the cockpit of an aircraft, this paper presents a transparent conductive oxide coated structure to prevent the incoming/outgoing electromagnetic waves. Currently, most of the RCS reduction technologies were focused on radar absorbing material such as paints based on conductive or magnetic materials in the fuselage, and there is not much research on countermeasures for achieving the low observability of materials that required optical transparency in actual weapon systems. In this study, the transmission/reflection and absorption performance of the ITO coated structure according to the change of the surface resistance of the transparent conductor were analyzed. Finally, the relationship between the electromagnetic and optical characteristics was established through fabrication and measurement.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.210-215
• /
• 2012

The absorption performance of a metal-backed single layered electromagnetic wave absorber is optimized at matching conditions of thickness and frequency indicating the maximum returns loss of incidence electromagnetic wave in the contour map. These matching conditions are obtained by applying the electromagnetic impedance to the transmission line theory, which depend on the complex permeability and complex permittivity of absorber material. The magnetic materials with high permeability can enhance the matching thickness condition to the wide frequency range based on the decrease of permeability with frequency and it can be used as a wideband electromagnetic wave absorber material. Therefore, the magnetic materials with higher saturation magnetization and lower permittivity than NiZn ferrite can be applied to the wideband electromagnetic wave absorber in order to satisfy the newly enforcing the electromagnetic compatibility regulation in the future.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.172-175
• /
• 2005

Sometimes, it is more convenient to use paint-type and spray-type EM wave absorbers than bulk-type or sheet-type. Thus, in this paper, we prepared paint-type and spry-type EM wave absorbers. The proportion of ferrites to paints, particle size of magnetic material, and kinds of paint should be considered to prepare a superior paint-type EM wave absorber. There is no big gap between spray-type and paint-type in EM wave absorption of EM wave absorbers prepared with same composition.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.234-237
• /
• 2003

The absorption and the interference shielding of the electromagnetic wave problem have been a very important issue for commercial and military purposes. This study dealt with the simulation reflection loss for electromagnetic absorbing sandwich type structures in X-band(8.2Ghz~12.4GHz). Glass/epoxy composites containing conductive carbon blacks were used for the face sheets and styrofoams were used for the core. Their permittivities in X-band were measured using the transmission line technique. Simulation results of 3-1ayered sandwich type structures showed the reflection loss using the theory about transmission and reflection in a multi-layered medium.