• 한국전자통신학회논문지
• /
• 제6권6호
• /
• pp.865-871
• /
• 2011

태양광 시스템이나 연료전지 시스템에 많이 사용되는 DC-DC 컨버터는 부스트 컨버터이다. 이 중 입출력 전류 리플이 작은 인터리브드 부스트 컨버터가 최근에 많이 사용되고 있다. 이 회로는 입출력 전류 리플이 작기 때문에 입출력 커패시터의 크기를 줄일 수 있다. 따라서 기존의 전해 커패시터에서 신뢰성이 우수한 필름 커패시터를 사용할 수 있고 이는 전체 시스템의 수명 및 신뢰성을 향상시킬 수 있다. 본 논문에서는 다단 인터리브드 부스트 컨버터의 입출력 전류리플의 수식을 유도하고 듀티에 따른 특성을 알아본다. 위에서 언급한 내용을 확인하기 위해서 PSIM 툴을 이용하여 계산된 값과 비교를 할 것이다.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.701-708
• /
• 2011

Although Titanium material has superior properties, it belongs to difficult-to-machine materials. The present research applies magnetic abrasive finishing to precision machining of internal-face of titanium pipes, and analyzed & assessed the influence of grinding conditions on magnetic abrasive effects through the removed amount and surface roughness of materials. There was the influence on grinding properties according to change of rotational speed, a total input of mixed powder and an input of grinding liquid, and when the total input, rotational speed and ratio of electrolytic iron versus magnetic abrasives are 8g and 1000rpm, it was most advantageous in aspects of surface roughness and material removal amount, and the grinding liquid remarkably improved the surface roughness and material removal amount only with addition of trace amounts of light oil rather than dry machining conditions. And a result of considering the influence on grinding properties by using an inert gas (Argon gas) for improving grinding properties of the internal-face of titanium pipe, the present research has obtained improvement effects in the removal amount and surface roughness through utilization of an inert gas.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.153-153
• /
• 2017

The application of the coating supports the mechanical characteristics of the implant, and various materials and coatings are currently being used in the implant in a way to accelerate adhesion. Especially, plasma electrolytic oxidation (PEO) coating has been proposed continually with good surface treatment of titanium alloys. Also, the PEO process can incorporate Ca and P ions on the titanium surface through variables varied factor. PEO process for bioactive surface has carried out in electrolytes containing Ca and P ions. Natural bone is composed of mineral elements such as Mg, Si, Zn, Sr, and Mn, etc. Especially, Mg and Si of these elements play role in bone formation and growth after clinical implantation of bio-implants. In this study, corrosion charateristics of PEO-treated Ti-6Al-4V alloy in solution containing Si and Mg ions has been investigated using several experimental techniques. The PEO-treated surfaces were identified by X-ray diffraction, using a diffractometer (XRD, Philips X' pert PRO, Netherlands) with Cu $K{\alpha}$ radiation. The morphology was observed by field-emission scanning electron microscopy (FE-SEM, Hitachi 4800, Japan) and energy-dispersive X-ray spectroscopy (EDX, Oxford ISIS 310, England). The potentiodynamic polarization and AC impedance tests for electrochemical degradations were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

• 공업화학
• /
• 제10권2호
• /
• pp.196-200
• /
• 1999

9-methyl-2,3,6,7-tetramethoxyfluorene이 $CH_3CN$과 $CH_2Cl_2$/TFA/TFAn-혼합용매계에서 갖는 전기화학적 특성을 CV측정을 통해 조사하였다. 이 화합물은 $CH_3CN$용매계에서 첫 번째 전자이동은 준가역 (quasi-reversible)반응, 두 번째 전자이동은 비가역 반응이었다. 그러나 TFA가 포함된 혼합용매 ($CH_2Cl_2$/TFA/TFAn)-계에서는 첫 번째, 두 번째 전자이동단계 모두 가역반응을 나타냈다. 진한 청색을 띄는 전해생성물은 혼합용매계에서 안전한 상태로 존재할 수 있어 향후 전기발색소자로서 사용이 가능하다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.431-445
• /
• 1993

The purpose of this study was to observe corrosion characteristics of six dental amalgams and was to analyse corrosion products electrochemically. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by using mechanical amalgamator, the triturated mass was inserted into the cylinderical metal mold ($12{\times}10mm$) and was condensed with 160kg/$cm^2$ by using the hydrolic press. The specimen was removed from the mold and was stored at room temperature for 1 week, and was polished with amalgam polishing kit. The anodic and cathodic polarization curve was obtained by using cyclic voltammetric method with 3-electrode potentiostat in saline for each amalgam and Ag, Sn, Cu plate specimen at $37{\pm}0.5^{\circ}C$. The potential sweep range was -1.7V~0. 4V(vs SCE) in working electrode and scan rate was 50mV/s and the exposed surface area of each specimen to the electrolytic solution was $0.79cm^2$. The results were as follows. 1. In anodic-cathodic polarization curve of amalgam specimens, two anodic current rising areas and two cathodic current peaks were obtained at the low Cu amalgam(CF, CS) specimen and three anodic current rising areas and three cathodic current peaks were obtained at the high Cu amalgam (TY, DS, HV) specimen. 2. As this compared with the anodic and cathodic current peak potentials of Sn, Cu and Ag specimen, the first cathodic current peak I c was caused by the reduction of divalent tin salt, second cathodic current peak IIIc results from the reduction of quadravalent tin salt, and third cathodic current peak me results from the reduction of copper salt. 3. As reverse potential sweeping was done repeatedly, anodic current was decreased slightly in all amalgam specimens.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1429-1435
• /
• 2012

태양광 시스템이나 연료전지 시스템 그리고 전기자동차에 많이 사용되는 DC-DC 컨버터는 부스트 컨버터이다. 이러한 부스트 컨버터를 병렬로 연결하고 위상차를 두고 동작하여 입출력 전류리플을 줄이는 인터리브드 부스트 컨버터가 최근에 많이 사용되고 있다. 이 회로는 입출력 전류 리플이 작기 때문에 입출력 커패시터의 크기를 줄일 수 있다. 따라서 기존의 전해 커패시터를 신뢰성이 우수한 필름 커패시터로 교체할 수 있고 이는 전체 시스템의 수명 및 신뢰성을 향상시킬 수 있다. 본 논문에서는 다단 인터리브드 부스트 컨버터에 사용되는 출력 커패시터의 전류리플 수식을 유도하고 듀티에 따른 특성을 알아본다. 이를 확인하기 위해서 PSIM 툴을 이용하여 계산된 값과 비교를 할 것이다.

• 대한약침학회지
• /
• 제3권2호
• /
• pp.1-25
• /
• 2000

We were trying to study the validity of Puffer fish's poison(Tetrodotoxin- TTX) to make a traditional Korean Medical treatment. The following conclusions were made after literary studies. 1. The first record of the puffer fish dates back 2000 years ago in the Chinese text Book of Mountain and Sea and other texts from the similar period. 2. Puffer fish's poison IS known as tetrodotoxin which is an amino perhydroquinazoline compound. It has a chemical formula of $C_{11}H_{17}N_3O_8$ in the hemiacetal structure and has the molecular weight of 319. 3. Tetrodotoxin (TTX) plays a role as potent neurotransmitter blocker by blocking the $Na^+$ -gate channel which hinders the influx of $Na^+$ ion into the cell. 4. Symptoms of the puffer fish poisoning ranges from blunted sense in the lips and tongue, occasional vomiting in the first degree to sudden descending of the blood pressure, apnea, and other critical conditions in the fourth degree. Intoxication of the puffer fish poison progresses at a rapid pace as death may occur after an hour and half up to eight hours in maximum. Typical death occurs after four to six hours. 5. Ways to treat the puffer fish poisoning include gastric irrigation, induce vomiting, purgation, intravenous fluid injection, and correcting electrolytic imbalance and acidosis. In cases of dyspnea, apply oxygen inhalation and conduct artificial respiration. 6. Tetrodotoxin (TTX) may be applied in treating brain disorders, ocular pain, excess pain in the large intestine and ileum, and relieving tension of the skeletal museles, neuralgia, rheumatism, arthritis, and etc. 7. In terms of Oriental medicine, the puffer fish poison has characteristics of sweet, warm, and poisonous. It's known efficacies are to tonify weakness, dispel damp, benefit the lower back, relieve hemorrhoid, kills parasites, remove edema, and so forth. And the puffer fish eggs processed with ginger are said to be effective against tuberculosis and lung cancer, thus, it's validity must be investigated and further research should be followed.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.299-303
• /
• 2015

The electrolyte is an important component in determining the performance of Fuel Cells. Especially, investigation of the conduction properties of electrolytes plays a key role in determining the performance of the electrolyte. The electrochemical properties of Yttrium stabilized zirconia (YSZ) were measured to allow the use of this material as an electrolyte for solid oxide fuel cells (SOFC) in the temperature range of $700-1000^{\circ}C$ and in $0.21{\leq}pO_2/atm{\leq}10^{-23}$. A Hebb-Wagner polarization experimental cell was optimally manufactured; here we discuss typical problems associated with making cells. The partial conductivities due to electrons and holes for 8YSZ, which is known as a superior oxygen conductor, were obtained using I-V characteristics based on the Hebb-Wagner polarization method. Activation energies for holes and electrons are $3.99{\pm}0.17eV$ and $1.70{\pm}0.06eV$ respectively. Further, we calculated the oxygen ion conductivity with electron, hole, and total conductivity, which was obtained by DC four probe conductivity measurements. The oxygen ion conductivity was dependent on the temperature; the activation energy was $0.80{\pm}0.10eV$. The electrolyte domain was determined from the top limit, bottom limit, and boundary (p=n) of the oxygen partial pressure. As a result, the electrolyte domain was widely presented in an extensive range of oxygen partial pressures and temperatures.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.16-28
• /
• 2014

This paper presents a novel high-power-factor circuit topology of AC to AC current-fed type high frequency resonant inverter which includes the function of power factor correction(PFC) in the proposed inverter to operate the AC input block with high power factor. The proposed circuit topology of AC to AC current fed type high resonant inverter removes DC link electrolytic capacitor and has also the one of power factor correction(PFC) in the inverter circuit without an additional PFC circuit since the input current by constituting it in parallel as an unit inverter, which assumes the class-E high frequency resonant inverter of conventional current-fed type, flows in the form of the resultant current flowing through each constant current reactor($L_{d1}$, $L_{d2}$). The circuit analysis of proposed inverter is generally described by adopting the normalized parameters and the evaluation of its operating characteristics are conducted by using the parameters such as the ratio of switching and resonant frequency(${\mu}$), coupling coefficient(k) and so on. An example of procedure for circuit design based on the characteristic values obtained from the theoretical analysis is presented. To confirm the validity of the theoretical analysis, the experimental results are also presented. In the future, the proposed inverter shows it can be practically used as power supply system for induction heating application, DC-DC converter etc.

• 대한금속재료학회지
• /
• 제46권11호
• /
• pp.747-754
• /
• 2008

Recently, the requirement for the ultra thin copper foil increases with smaller and miniaturized electronic components. Therefore, it is important to examine the surface state of substrate depending on the processing parameter during the anodic oxidation. This study investigated the effect of the various electrolyte concentrations on anodizing of titanium anode prior to copper electrodeposition. Different surface morphology of anodized titanium was obtained at different electrolytic concentration 0.5 M to 3.0 M. In addition, the effect that the surfaces and the electrical characteristics on the electrodeposited copper layer was observed. In this study, surface anodized in the group containing 0.5M $H_2SO_4$ shows more uniform copper crystals with low surface roughness. the surface roughness and sheet resistance for 0.5M $H_2SO_4$ group were $1.353{\mu}m$ and $0.104m{\Omega}/sq$, respectively.