• 한국수소및신에너지학회논문집
• /
• 제14권4호
• /
• pp.335-347
• /
• 2003

High temperature electrolysis (HTE) can become a key target technology for fulfilling the hydrogen requirement for the future hydrogen economy. This technology is based upon the partial replacement of electricity with heat energy for the electrolysis. Although the current research status of high temperature electrolysis in many countries remains at the small laboratory scale, the technology has great potential for producing hydrogen at a higher efficiency than low-temperature electrolysis (LTE). The efficiency of LTE is not expected to rise above 40%, whereas the efficiency of HTE has been reported to be above 50%. The higher efficiency of HTE would reduce costs by more than 30% compared to LTE. In this study, the technical data regarding the HTE of water and the resulting hydrogen production are reviewed, with an emphasis on the application of high temperature solid electrolyte and oxide electrodes for the HTE process.

• 농업생명과학연구
• /
• 제44권1호
• /
• pp.1-8
• /
• 2010

This study was conducted to investigate effect of low temperature and ripeness stages on fruit quality of chilli pepper (cv. Nockgwang) during storage at 5, 7, and $10^{\circ}C$. Fruits at three ripeness stages were selected based on uniform fruit size and three maturities on peel color: S1 (fully developed fruit just before the onset of ripening), S2 (fruits in the onset of color change), and S3 (fruits in completely red in color). Lower temperature attributed to increase fruit weight loss (WL) and WL was higher in S2 than the other ripeness stages. The highest respiration rate and ethylene production was found at S2 fruit while those of fruit in green and red showed similar and remained lower level during storage. Electrolyte leakage (EL) was higher as storage temperature decreased. After 28 d storage, EL rates of fruits at $5^{\circ}C$ were 43, 36, and 17% in S1, S2, and S3 while those at $10^{\circ}C$ were 17, 19, and 14%, respectively. These results show that chilli pepper fruits are tended to lose more water at lower temperature partially associated with increased EL. Thus, threshold storage temperature must be considered for avoiding chilling during storage and for extending the storage life of fresh pepper fruits.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.281-283
• /
• 2005

Water management in polymer electrolyte membrane fuel cells(PEMFCs) is one of the most challenging issues. Freeze start-up in the automotive applications is also important research topic in the PEMFC field. Transportation of proton and separation of reactant gases are main roles of polymer electrolyte membranes. It has been known that water in the membrane conducts as a vehicle for the proton transportation. At sub-zero temperature, the frozen water blocks the access of reactant gases to the active sites of electrode as well as occurs the physical destruction of fuel cell structures. In this study, property changes of electrolyte membranes in the freeze conditions $(at\;-25^{\circ}C)$ were investigated. For the various amount of water contained membranes, the property changes, especially for the proton conductivity, were observed after several times of freeze/thaw$(-25\~80^{\circ}C)$ cycle.

• 한국표면공학회지
• /
• 제23권1호
• /
• pp.34-43
• /
• 1990

Al-Si piston alloys such as AlS10CuMg have been anodized to examine apossibility of forming a hard film aat relatively higher temperatures compard with those in conventional sulfuric acid processes. Three types of electrolytes have been employed in this study ; electrolyte A(15% H2SO4, $0^{\circ}C$), electrolyte B(12% H2SO4, 1% oxalic, $10^{\circ}C$), electrolyte C(tartaric acid 125g/L+oxalic 75g/L+aluminum sulfate 225g/L, $25^{\circ}C$). Hard anodisine process in electrolyte B at a current density of 1.54A/dm2 produced a harder film of VHN 396 at a relatibely low film forming voltage compared with those obtained in other electrolyte at equivalent current density. A liner relationship between hardness and abrasion resistance exists for Al-Si piston alloys. The hardness of anodized film decreasees with increasing silicon content in Al-Si alloys and also with bath temperature. The film hardeness of Na-modified alloy os higher than that of P-modified alloy due to its finer microstructre. The film on the silicon phase in Al-Si alloys is observed to be formed by lateral growth of oxide film nucleated at surroundings.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.84-90
• /
• 2010

This paper presents the effects of a dielectric layer and an electrolyte on the driving performance of an electrowetting on dielectric (EWOD)-based liquid lens. The range of tunable focal length of the EWOD-based liquid lens was highly dependent on the conditions of the dielectric layer, which included an inorganic oxide layer and an organic hydrophobic layer. Moreover, experiments on the physical and optical durability of electrolyte by varying temperature conditions, were conducted and their results were discussed. Finally, the lens with a truncated-pyramid silicon cavity having a sidewall dielectrics and electrode was fabricated by anisotropic etching and other micro-electromechanical systems (MEMS) technologies in order to demonstrate its performance. The lens with $0.6-{\mu}m$-thick $SiO_2$ layer and 10 wt% LiCl-electrolyte exhibited brilliant focal-length tunability from infinity to 3.19 mm.

• Journal of the Korean Data Analysis Society
• /
• 제20권6호
• /
• pp.2721-2731
• /
• 2018

This study purposes to derive the predictive model for the cold tolerance of Brassica napus, using the data collected in the Tree Breeding Lab of Gyeongsang National University during July and August of 2016. Three Brassica napus samples were treated at each of low temperatures from $4^{\circ}C$ to $-12^{\circ}C$ by decrement of $4^{\circ}C$, step by step, and electrolyte leakage levels were measured at each stage. Electrolyte leakages were observed tangibly from $-4^{\circ}C$. We tried to fit the six nonlinear regression models to the electrolyte leakage data of Brassica napus: 3-parameter logistic model, baseline logistic model, 4-parameter logistic model, (4-1)-parameter logistic model, 3-parameter Gompertz model, and (3-1)-parameter Gompertz model. The baseline levels of the electrolyte leakage estimated by these models were 4.81%, 4.07%, 4.19%, 4.07%, 4.55%, and 0%, respectively. The estimated median lethal temperature, LT50, were $-5.87^{\circ}C$, $-6.31^{\circ}C$, $-6.05^{\circ}C$, $-6.35^{\circ}C$, $-4.98^{\circ}C$, and $-5.15^{\circ}C$, respectively. We compared and discussed the measures of goodness of fit to select the appropriate nonlinear regression model.

• 한국수소및신에너지학회논문집
• /
• 제33권2호
• /
• pp.176-182
• /
• 2022

Since the various characteristics of the polymer electrolyte membrane are not clearly identified, it is difficult to predict and design applications for various conditions. In this study, as a previous study on the aging of the polymer electrolyte membrane, a study was conducted on the change of mechanical properties according to the aging of the polymer electrolyte membrane. Through the tensile test of Nafion 117, the mechanical properties change due to aging was confirmed. As a result of the tensile test, it was confirmed that the aged Nafion 117 had reduced tensile strength. Through DSC measurement, aged Nafion confirmed that the glass transition temperature and enthalpy change were low, which is thought to be the effect of molecular motion and transition due to the lapse of time. The effect is thought to cause a difference in the amount of change in enthalpy, resulting in a difference in mechanical properties during tension.

• 전기화학회지
• /
• 제21권2호
• /
• pp.39-46
• /
• 2018

많은 실험실 기반의 리튬이차전지 실험결과는 코인셀로부터 얻어진다. 이는 조립의 용이성, 저렴한 가격, 실험 결과의 우수한 재연성 등에 기인한다. 코인셀은 케이스(case), 가스켓(gasket), 스페이서(spacer disk), 스프링(wave spring)로 구성되어 있으며, 이러한 구조적인 특성으로 인하여 코인셀은 상용화된 파우치, 각형 및 원통형 전지에 비하여 전극 무게 대비 많은 양의 전해질을 포함하게 된다. 하지만 과량의 전해액이 셀의 성능에 미치는 영향에 대한 연구는 현재까지 이루어지지 않은 상황이다. 본 연구에서는 액체 전해액의 양을 다르게 제어하여 코인셀에 미치는 영향을 알아보고자 하였다. 전해액의 양은 전극 용량 대비 30, $100mg\;mAh^{-1}$(전해액의 양/전극용량)로 제어하였으며, 조립된 셀의 전해액 함량에 따른 전기화학적 특성을 확인하기 위해 초기 충 방전 곡선과 상온 ($25^{\circ}C$), 고온 ($60^{\circ}C$) 및 고전압(4.5 V)에서의 수명특성평가를 진행하였다. $30mg\;mAh^{-1}$의 전해액을 포함하는 단위 전지의 경우, 고온 및 고전압 조건에서 $100mg\;mAh^{-1}$의 경우에 비해 매우 우수한 방전 용량 유지 특성을 나타내었다. 전자는 후자보다 더 큰 내부저항 증가를 보였으며, 이를 통해 전해액의 양이 전지의 방전 용량 유지 특성에 매우 큰 영향을 미치고 있음을 확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 학술대회지
• /
• pp.21-37
• /
• 2005

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.147-150
• /
• 2003