• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.27-36
• /
• 2007

본 논문에서는 다양한 조성의 주석-은-구리 합금계 솔더볼과 ENIG 및 Cu-OSP 패드와의 계면 반응에 대해 연구하였다. ENIG 패드와 미량의 Sb이 첨가된 합금 솔더와의 계면 반응 시 다른 솔더에 비해 매우 얇은 100 nm 내외의 두께를 가진 P-rich Ni layer가 형성되었다. 미량의 Ni이 첨가된 합금 솔더와 Cu-OSP 금속 패드와의 계면 반응 시에는 다른 솔더와는 달리 균일한 두께의 $Cu_6Sn_5$ 금속간화합물이 형성되었으며 추가 리플로우 시에 금속간화합물 입자가 거의 성장하지 않았다. 또한 $150^{\circ}C$의 장시간 열처리 시에 다른 솔더에 비해 매우 얇은 두께의 $Cu_3Sn$ 금속간화합물이 형성되었다.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.1-6
• /
• 2017

The effect of metal turnover (MTO) of electroless Ni plating bath on the brittle fracture behavior of electroless nickel electroless palladium immersion gold (ENEPIG)/Sn-3.0wt%Ag-0.5wt%Cu(SAC305) solder joint was evaluated in this study. The MTOs of the electroless Ni for the ENEPIG surface finish were 0 and 3. As the MTO increased, the interfacial IMC thickness increased. The brittle fracture behavior of the ENEPIG/SAC305 solder joint was evaluated with high speed shear (HSS) test. The HSS strength decreased with increasing the MTO of the electroless Ni bath. The brittle fracture increased with increasing the shear speed of the HSS test. The percentage of the brittle fracture for the 3 MTO sample was much higher than that for the 0 MTO sample.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.120.2-120.2
• /
• 2017

본 연구에서는 고신뢰성 인쇄회로기판이나 플립칩 패키지에 적용되는 범프 표면처리에서 널리 사용되는, ENIG나 ENEPIG 대체를 위한 electroless Pd/immersion Au(EPIG)에 대하여 연구하였다. Transmission electron microscopy(TEM) 분석 결과 형성된 Au layer는 crystalline, Pd layer는 amorphous 임을 확인하였으며, 열처리 후 X-Ray photoelectron spectroscopy(XPS)를 통하여 EPIG층이 하부 copper의 확산방지막으로서 효과가 있음을 알 수 있었다. 또한, 비정질 Pd layer가 확산을 방지하기 위하여는 일정수준 이상의 두께가 필요하며, 그 두께는 35~65nm 수준임을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.25-29
• /
• 2014

This research was aimed to fabricate an optical fiber-based SERS substrate which can detect dopamine neurotransmitters. Chitosan nanoparticles (NPs) were firstly anchored on the surface of optical fiber, and then gold layer was subsequently deposited on the anchored chitosan NPs via electroless plating method. Finally, chitosan-gold nanocomposites combined with optical fiber reacted with dopamine molecules of 100-1500 mg/day which is a standard daily dose for Parkinson's disease patients. The amplified Raman signal at $1348cm^{-1}$ obtained from optical fiber-based SERS substrate was plotted versus dopamine concentrations (1-10 mM), demonstrating an approximate linearity of Y = 303.03X + 2385.8 ($R^2$ = 0.97) with narrow margin errors. The optical fiber-based Raman system can be potentially applicable to in-vitro (or in-vivo) detection of probe molecules.

• 마이크로전자및패키징학회지
• /
• 제11권2호
• /
• pp.11-16
• /
• 2004

전자칩의 고집적화에 의해 전자기기들은 점점 소형화 되어가고 있으며, 이들 기기들에서 발생되는 열은 기기의 성능 저하뿐 아니라 수명을 단축시킨다. 본 연구에서는 효율적인 방열 위한 마이크로 히트싱크 제조를 위하여 멤브레인에 금속(금, 니켈, 구리)은 도금하는 무전해 도금 방법을 이용하였다. 무전해 도금은 폴리카보네이트 멤브레인을 sensitization과 activation 등의 전처리 후, 도금하고자 하는 금속염 수용액에 침적시켜 실행하였다. 무전해 도금에 의하여 제조된 각각의 마이크로피브릴의 열전달 특성과 방열량은 표면적이 가장 큰 니켈 마이크로피브릴에서 가장 우수하게 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.993-994
• /
• 2011

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.71-77
• /
• 2012

We studied the effect of heat treatment on the microstructures and mechanical strength of the solder joints in the Light Emitting Diode (LED) packages. The commercial LED packages were mounted on the a flame resistance-4 (FR4) Printed Circuit Board (PCB) in the reflow process, and then the joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 hours, respectively. After the heat treatment, we measured the shear strength of the solder joints between the PCB and the LED packages to evaluate their mechanical property. We used Pb-free Sn-3.0Ag-0.5Cu solder to bond between the LED packages and the PCBs using two different surface finishes, Electroless Nickel-Immersion Gold (ENIG) and Electroless Nickel-Electroless Palladium-Immersion Gold (ENEPIG). The microstructure of the solder joints was observed by a scanning electron microscope (SEM). (Cu,Ni)6Sn5 intermetallic compounds (IMCs) formed between the solder and the PCB, and the thickness of the IMCs was increased with increasing aging time. The shear strength for the ENIG finished LED package increased until aging for 300 h and then decreased with increasing aging time. On the other hand, in the case of an ENEPIG finished LED package, the shear strength decreased after aging for 500 h.

• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.237-242
• /
• 2011

The effect of shearing speed on the shear force and energy of Sn-0Ag-0.5Cu solder ball was investigated. Various UBM (under bump metallurgy)'s on Cu pads were used such as ENEPIG (Electroless Nickel, Electroless Palladium, Immersion Gold; Ni/Pd/Au), ENIG (Electroless Nickel, Immersion Gold; Ni/Au), OSP (Organic Solderability Preservative). To fabricate a shear test specimen, a solder ball, $300{\mu}m$ in diameter, was soldered on a pad of FR4 PCB (printed circuit board) by a reflow soldering machine at $245^{\circ}C$. The solder bump on the PCB was shear tested by changing the shearing speed from 0.01 m/s to 3.0 m/s. As experimental results, the shear force increased with a shearing speed of up to 0.6 m/s for the ENIG and the OSP pads, and up to 0 m/s for the ENEPIG pad. The shear energy increased with a shearing speed up to 0.3 m/s for the ENIG and the OSP pads, and up to 0.6 m/s for the ENEPIG pad. With a high shear speed of over 0 m/s, the ENEPIG showed a higher shear force and energy than those of the ENIG and OSP. The fracture surfaces of the shear tested specimens were analyzed, and the fracture modes were found to have closer relationship with the shear energy than the shear force.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.45-50
• /
• 2014

A fully packed capillary electrochromatographic (CEC) microchip with an on-column micro-solid phase extraction (SPE) bed for the preconcentration and separation of organic analytes was prepared. A linear microchannel with monodisperse colloidal silica packing was formed on a cyclic olefinic copolymer microchip with two reservoirs on both ends. Silver-cemented silica packing frit structure was formed at the entrance of the microchannel by electroless plating treatment as a base layer. A gold coating was formed on it by reducing $Au^{3+}$ to gold with hydroxylamine. Finally micro-SPE bed was formed by self-assembly adsorption of 1-dodecanethiol on it. Micro-SPE beds were about 100-150 ${\mu}m$ long. Approximately $10^3$ fold sensitivity enhancements for Sulforhodamine B, and Fluorescein in nM concentration levels were possible with 80 s preconcentration. Basic extraction characteristics were studied.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.51-56
• /
• 2015

솔더 조인트의 신뢰성 강화를 위해서 다양한 pad finish material이 사용되고 있으며, 최근에는 Electroless Ni Electroless Pd Immersion Gold (이하 ENEPIG) pad가 많이 사용되고 있다. 따라서, 본 연구는 상용화 되어 사용중인 Electrolytic Ni (soft Ni) pad와 최근 이슈가 되고 있는 ENEPIG pad에 대한 신뢰성 평가에 관한 것으로, 다양한 Cu 함량에 따른 거동을 관찰 하였다. Reflow 후 솔더와 pad간의 접합층은 $Cu_6Sn_5$에 Ni이 치환된 형태의 금속간 화합물로 구성되어 있었으며, ENEPIG pad의 경우, 접합층과 Ni layer 사이에 $Ni_3P$ (dark layer) layer가 관찰 되었다. 또한, Cu 함량에 따라 Dark layer의 두께를 제어할 수 있었다. 충격 낙하 시험 후, 파괴모드를 관찰한 결과 soft Ni pad와 ENEPIG pad에서 서로 다른 파괴모드가 관찰 되었으며, soft Ni의 경우, 1차 IMC와 2차 IMC 경계에서 파괴가 관찰 되었고, ENEPIG pad의 경우, dark layer에서 파괴가 관찰 되었다. IMC와 pad material, bulk 솔더와의 lattice mismatch에 의해 불안정한 계면이 존재하며, 이는 연속적인 외부 충격에 의해 가해진 열적, 물리적 스트레스를 IMC 계면으로 전송하기 때문에, 솔더의 신뢰성 향상을 위해서는 솔더 벌크의 제어와 IMC의 두께 및 형상의 제어는 필요하다.