• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.314-319
• /
• 2016

Reduced activation ferritic-martensitic steels (RAFM) are envisaged in future fusion technology as structural material which will be in direct contact with a flowing liquid lead-lithium melt, serving as breeder material. Aluminium-based coatings had proven their ability to protect the structural material from corrosion attack in flowing Pb-15.7Li and to reduce tritium permeation into the coolant, significantly. Coming from scales produced by hot dipping aluminization (HDA), the development of electrochemical-based processes to produce well-defined aluminium-based coatings on RAFM steels gained increased attention in research during the last years. Two different electrochemical processes are described in this paper: The first one, referred to as ECA, is based on the electrodeposition of aluminium from volatile, metal-organic electrolytes. The other process called ECX is based on ionic liquids. All three processes exhibit specific characteristics, for example in the field of processability, control of coating thicknesses (low activation criteria) and heat treatment behavior. The aim of this article is to compare these different coating processes critically, whereby the focus is on the comparison of ECA and ECX processes. New results for ECX will be presented and occurring development needs for the future will be discussed.

• 한국재료학회지
• /
• 제17권5호
• /
• pp.283-288
• /
• 2007

This study aimed to investigate the effects of the seed layer with copper electroplating on the surface morphology of copper foil. Three kinds of seed metal such as platinum, palladium, Pt-Pd alloy were used in this study. Electrodeposition was carried out with the constant current density of 200 $mA/cm^2$ for 68 seconds. Electrochemical experiments, in conjunction with SEM, XRD, AFM and four-point probe, were performed to characterize the morphology and mechanical characteristics of copper foil. Large particles were observed on the surface of the copper deposition layer when a copper foil was electroplated on the 130 nm thickness of Pd, Pt-Pd seed layer. However, a homogeneous surface, low resistivity was obtained when the 260 nm thickness of Pt, Pt-Pd alloy seed layer was used. The minimum value of resistivity was 2.216 ${\mu}{\Omega}-cm$ at the 260 nm thickness of Pt-Pd seed layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.166-169
• /
• 2006

We fabricated hexagonal copper sulfide $Cu_2S$ nanowires to obtain a larger contact area of $Cu_2S/CdS$ solar cell. Copper sulfide nanowires were grown on Cu foil at room temperature by gas-sol id reaction. The size, density and shape of nanowires seemed to be affected by the change or reaction time temperature, crystallographic orientation of Cu foil, and molar ratio of the mixed gas. We controled the length and the diameter of the nanowires and we obtained suitable nanowire arrays which has fitting size for uniform deposition with n-type CdS. CdS layer was deposited on the nanowire array by electrodeposition and it seemed to be uniform. The $Cu_2S/CdS$ nanowires/CdS junction showed diode characteristics, A large contact area is expected with the $Cu_2S/CdS$ nanowire structure as compared with the $Cu_2S/CdS$ thin film.

• 한국표면공학회지
• /
• 제27권5호
• /
• pp.292-302
• /
• 1994

Alloy deposits of 80Sn-20Pb, electroplated on Cu-based leadframe alloy from an organic sulfonate bath were aged at $150^{\circ}C$ to form intermetallic phases between substrate and deposit, and effects of the deposit morphology, influenced by deposition conditions, on the fracture resistance of the 80Sn-20Pb deposit aged at $150^{\circ}C$ were examined. The growth rate of intermetallic compound layer on aging depended on the microstructure of deposit ; it was fastest in deposit formed using pulse current in bath without grain refining additive, but slowest in deposit formed using dc current in bath containing grain refining additive in spite of similar structure with equivalent grain size. The grain refining additive incorporated in electrodeposit appears to inhibit diffusion of atoms on aging, resulting in slow growth of intermetallic layer in the thickness direction but substantial growth in the lateral one. Density of surface cracks that were occurring when samples were subjected to the $90^{\circ}$-bending test increased with increasing the thickness of intermatallic layer on aging. For the same aged samples, the surface crack density of the sample electrodeposited from a bath containing the grain refining additive was the least due to the inhibiting effect of the additive incorporated into the deposit during electrolysis on atomic diffusion.

• Corrosion Science and Technology
• /
• 제23권4호
• /
• pp.296-301
• /
• 2024

Steels have excellent mechanical properties and weldability. They are also economically producible. Thus, they are widely applied in various industries. However, they have a disadvantage in that rust can occur after a certain period of time. To compensate for this, Zn, which has excellent sacrificial corrosion resistance, can be coated on steels. With global zinc consumption increasing at the current rate, depletion is expected in the near future. Recently, POSCO has developed innovative Al-Zn-Si alloy coated steel sheets with better corrosion resistance than Zn coating. In this study, corrosion resistance, weldability, friction characteristics, and so on were evaluated compared to GI steel sheets to evaluate their applicability to automotive steel sheets. It showed excellent corrosion resistance even at a lower coating weight compared to GI steel sheet. It was also excellent in terms of galling and welding LME. Its spot welding life, electrodeposition coating, and bendability were equally excellent. This is presumed to be related to the formation of the Al-Zn-Si alloy phase at the interface of the coating layer.

• 공업화학
• /
• 제8권4호
• /
• pp.645-652
• /
• 1997

백금 회전전극을 이용하여 확산지배영역에서의 구리 착화합물의 환원에 대한 전기화학적 특성조사 및 이에 대한 속도인자들을 구하였다. 황산염 용액내에서 Cu(II)의 환원은 2전자, 1단계 반응이며, 염화물 용액내에서의 Cu(II)는 1전자, 2단계 반응으로 환원된다. 환원반응에서의 전달계수는 황산염 용액내에서 Cu(II)가 가장 작으며, 할로겐염 중에서 Cu(I)의 전달계수는 1에 가까운 값을 나타내었다. 염화물 용액안에서 구리이온의 환원에 대한 표준속도상수는 Cu(II)의 환원이 Cu(I)을 출발물질로 할 경우보다 100배 정도 빠른 값을 나타내었다. 그리고 확산계수는 $Cl^-$존재시의 Cu(II), $I^-$, $Br^-$, $Cl^-$존재시의 Cu(I) 및 $SO_4^{-2}$존재시의 Cu(II)의 순으로 증가하였으며, 각 용액 내에서의 구리이온의 반지름 및 확산에 대한 활성화 에너지도 위의 순서와 동일하게 감소하였다. 회전전극상의 구리전착의 경우 전착전위 및 농도에 따라 불균일한 전착표면을 형성하였으며, 이러한 전착표면의 불균일성은 UV/VIS로 분석이 가능하였다.

• 전기화학회지
• /
• 제22권3호
• /
• pp.128-137
• /
• 2019

리튬은 가장 가벼운 금속일 뿐만 아니라 낮은 환원전위(-3.04 V vs. SHE)와 큰 이론용량($3860mAh\;g^{-1}$)을 가지고 있어 차세대 음극 소재로 연구되고 있다. 리튬 금속을 전극으로 사용하는 리튬이차전지의 경우 전지의 효율과 에너지 밀도 극대화를 위해 얇은 두께의 리튬 전극이 필요하지만 기존의 리튬 박을 제조하는 물리적인 압연 방법으로는 일정수준 이하의 두께를 가지는 리튬 박을 제조하는데 한계가 있다. 본 연구에서는 물리적인 방법 대신 전해도금법으로 박막의 리튬을 전착하여 전해도금 시 사용되는 전해액의 종류와 전착 조건이 전착 특성 및 전착된 리튬의 전기화학 특성에 주는 영향을 확인하였다. 전착 전해액의 농도가 높을 수록 리튬 덴드라이트(dendrite) 형성 억제에 유리한 크고 둥근 형태의 리튬 입자를 형성하였으며 우수한 stripping 효율 (92.68%, 3M LiFSI in DME) 을 나타냈다. 전착 속도(전류 밀도)의 경우 속도 증가에 따라 리튬이 길이 방향으로 성장하여 길고 끝이 뾰족한 형태를 가지는 경향을 보였으며, 이로 인한 비표면적 증가로 전착된 리튬 전극의 stripping 효율이 감소(90.41%, 3M LiFSI in DME, $0.8mA\;cm^{-2}$)하는 경향을 확인하였다. 두 종류의 염과 용매를 조합하여 얻은 1.5M LiFSI + 1.5M LiTFSI in DME : DOL (1 : 1 vol%) (Du-Co) 전해액에서 전착된 리튬 전극이 가장 우수한 stripping 효율 (97.26%) 및 안정적인 가역성을 보였으며, 이는 염의 분해물로 구성된 전극 표면 피막의 Li-F 성분이 주는 안정성 향상과 피막의 유연성을 부여하는 DOL 효과에 기인한 것으로 추정된다.

• 한국재료학회지
• /
• 제26권12호
• /
• pp.681-687
• /
• 2016

Zirconium(Zr) nuclear fuel cladding tubes are made using a three-time pilgering and annealing process. In order to remove the oxidized layer and impurities on the surface of the tube, a pickling process is required. Zr is dissolved in HF and $HNO_3$ mixed acid during the process and pickling waste acid, including dissolved Zr, is totally discarded after being neutralized. In this study, the waste acid was recycled by adding $BaF_2$, which reacted with the Zr ion involved in the waste acid; $Ba_2ZrF_8$ was subsequently precipitated due to its low solubility in water. It is very difficult to extract zirconium from the as-recovered $Ba_2ZrF_8$ because its melting temperature is $1031^{\circ}C$. Hence, we tried to recover Zr using an electrowinning process with a low temperature molten salt compound that was fabricated by adding $ZrF_4$ to $Ba_2ZrF_8$ to decrease the melting point. Change of the Zr redox potential was observed using cyclic voltammetry; the voltage change of the cell was observed by polarization and chronopotentiometry. The structure of the electrodeposited Zr was analyzed and the electrodeposition characteristics were also evaluated.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.65-69
• /
• 2008

The magneto impedance (MI) behaviors of patterned $Co_{30}Fe_{34}Ni_{36}$ microwire were investigated with respect to its shape variation. After preparing $Co_{30}Fe_{34}Ni_{36}$ microwires using electrodeposition and photolithography methods, impedance measurements were conducted to compare the MI ratios of the devices with different aspect ratios. As a result, the anisotropy field and transverse permeability were found to be strongly affected by the aspect ratio of the device. The external field value at the maximum impedance and maximum sensitivity of the device was found to increase with increasing device width, which was attributed to the increased transverse anisotropy with decreasing aspect ratio. While an increase in the thickness also contributed to an increase in the MI ratio, a variation in the thickness not only increased the anisotropic field, but the variation in the MI ratio was as also affected by the skin effect. Conversely, the MI ratios of the present devices were hardly affected by variations in the length. Considering the typical aspect ratios of our devices, it was expected that the length effect would emerge when the aspect ratio was reduced to less than 10. Nevertheless, our results show that for the practical application of MI devices, the MI characteristics can be optimized by tailoring the aspect ratio of the devices.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3835-3839
• /
• 2013

A new synthesis route for Pt nanoparticles by direct electrochemical reduction of a solid-state Pt ion precursor ($K_2PtCl_6$) is demonstrated. Solid $K_2PtCl_6$-supported polyethyleneimine (PEI) coatings on the surface of glassy carbon electrode were prepared by simple mixing of solid $K_2PtCl_6$ into a 1.0% PEI solution. The potential cycling or a constant potential in a PBS (pH 7.4) medium were applied to reduce the solid $K_2PtCl_6$ precursor. The reduction of Pt(IV) began at around -0.2 V and the reduction potential was ca. -0.4 V. A steady state current was achieved after 10 potential cycling scans, indicating that continuous formation of Pt nanoparticles by electrochemical reduction occurred for up to 10 cycles. After applying the reduction potential of -0.6 V for 300 s, Pt nanoparticles with diameters ranging from $0.02-0.5{\mu}m$ were observed, with an even distribution over the entire glassy carbon electrode surface. Characteristics of the Pt nanoparticles, including their performance in electrochemical reduction of $H_2O_2$ are examined. A distinct reduction peak observed at about -0.20 V was due to the electrocatalytic reduction of $H_2O_2$ by Pt nanoparticles. From the calibration plot, the linear range for $H_2O_2$ detection was 0.1-2.0 mM and the detection limit for $H_2O_2$ was found to be 0.05 mM.