• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.46-52
• /
• 2013

The current distribution passing through grounding electrode is required for calculating an impedance of grounding electrode using the electromagnetic field model. In this paper the numerical calculation for currents passing through a grounding electrode as a function of frequency was given. The proposed approach is based on the wire antenna model(AM) in the frequency domain. The Pocklington's equation driven from the wire antenna theory was numerically calculated by the Galerkin's method. The triangle function was applied to both the basis function and the weighting function. The current distribution of a horizontal ground electrode was simulated in MATLAB. Also these results were compared with the data obtained from the CDEGS HIFREQ calculation.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.116-120
• /
• 2015

Lithium diffusivity of fluorine-free and -doped tin-nickel (Sn-Ni) film model electrodes with improved interfacial (solid electrolyte interphase (SEI)) stability has been determined, utilizing variable rate cyclic voltammetry (CV). The method for interfacial stabilization comprises fluorine-doping on the electrode together with the use of electrolyte including fluorinated ethylene carbonate (FEC) solvent and trimethyl phosphite additive. It is found that lithium diffusivity of Sn is largely dependent on the fluorine-doping on the Sn-Ni electrode and interfacial stability. Lithium diffusivity of fluorine-doped electrode is one order higher than that of fluorine-free electrode, which is ascribed to the enhanced electrical conductivity and interfacial stabilization effect.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.349-354
• /
• 2005

Recently, there are many equipment of electricity, electronics, and communication which need to grounding in the building. When the electric current flows into a certain grounding system in the same building, the potential rise of other grounding system is possible to be affected by its potential rise. This potential interference was affected by the surface potential, it is deeply related whit the electrode shape. In this paper, basic formula is deduced on the basis of both electrodes surface potential of grounding electrode in a source of the potential interference and groundidng electrode which receive the potential interference. Therefore the degree of potential interference as multiple groundidng electrode can be verified the simulated results by means of the simple model in advance. This is for investigating the grounding resistance of grounding electrodes, the experiment was performed with model-scale of the grounding system and the scaled model grounding system was to this experiment using a water tank of a stainless steel-hemisphere shape. since mesh electrodes have been widely in the general building, we're tried to analyze that this water tank model and it's simulation as well.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.94-101
• /
• 2011

A lumped mass damped vibratory model was proposed for quantitative understanding of welding machine characteristics. An experimental setup was developed to determine the mechanical parameters (moving mass m, equivalent stiffness k and damping c) which govern the dynamic mechanical response of the resistance spot welding machine. During the test, acceleration of the electrodes for each level of applied load was measured by accelerometer, filtered and numerically integrated to find the corresponding velocity and displacement. The machine dynamic parameters were determined by finding the unknowns of the proposed model with experimental data. A Simulink model was proposed to investigate the influence of these mechanical parameters on the welding process. The electrode response was simulated by changing values of stiffness and damping. It was observed that both of the machine parameters(c, k) have significant effect on the response of electrode head.

• 대한의용생체공학회:의공학회지
• /
• 제25권3호
• /
• pp.207-215
• /
• 2004

본 연구에서는 유전 프로그램을 이용하여 6가지 형태의 금속 와이어 배치를 가진 전극을 생성하여 각 전극이 3차원 형태의 달팽이관에 미치는 기계적인 영향과 그 거동을 유한요소법을 이용하여 분석하였다. 그리고 전극이 삽입되는 달팽이관은 helico-spiral 근사방법에 의해 결정된 식을 이용하였으며, 고실계단(scala tympani)의 형태는 실제 고실계단 단면의 영상정보를 추출하여 얻어내었다. 해석결과 금속 와이어가 평행하게 배치될 경우 가장 큰 힘을 달팽이관 외벽에 전달하며, 삽입에도 가장 큰 힘이 필요한 것을 알 수 있었다. 그리고 달팽이관은 3차원 구조이므로 전극이 삽입되면서 삽입 전에 자극 사이트가 바라보도록 설정한 방향보다 조금 돌아감을 확인하였다. 이 연구의 결과로부터 전극의 강성이 외상(trauma)을 줄이는데 중요하다는 것을 알 수 있다.

• 한국환경과학회지
• /
• 제29권8호
• /
• pp.793-800
• /
• 2020

The conventional development of multi-component electrodes is based on the researcher's experience and is based on trial and error. Therefore, there is a need for a scientific method to reduce the time and economic losses thereof and systematize the mixing of electrode components. In this study, we use design of mixture experiments (DOME)- in particular a simplex lattice design with Design Expert^Ⓡ program- to attempt to find an optimum mixing ratio for a three-component electrode for the high RNO degradation; RNO is an indictor of OH radical formation. The experiment included 12 experimental points with 2 center replicates for 3 different independent variables (with the molar ratio of Ru, Ti, Ir). As the Prob > F value of the 'Quadratic' model is 0.0026, the secondary model was found to be suitable. Applying the molar ratio of the electrode components to the corrected response model results is an RNO removal efficiency (%) = 59.89 × [Ru] + 9.78 × [Ti] + 67.03 × [Ir] + 66.38 × [Ru] × [Ir] + 132.86 × [Ti] × [Ir]. The R² value of the equation is 0.9374 after the error term is excluded. The optimized formulation of the ternary electrode for an high RNO degradation was acquired when the molar ratio of Ru 0.100, Ti 0.200, Ir 0.700 (desirability d value, 1).

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.79-88
• /
• 2013

$LiFePO_4$ is a promising active material (AM) suitable for use in high performance lithium-ion batteries used in automotive applications that require high current capabilities and a high degree of safety and reliability. In this study, an optimization of the electrode design parameters was performed to produce high capacity lithium-ion batteries based on $LiFePO_4$/graphite electrodes. The electrode thickness and porosity (AM density) are the two most important design parameters influencing the cell capacity. We quantified the effects of cathode thickness and porosity ($LiFePO_4$ electrode) on cell performance using a detailed one-dimensional electrochemical model. In addition, the effects of those parameters were experimentally studied through various coin cell tests. Based on the numerical and experimental results, the optimal ranges for the electrode thickness and porosity were determined to maximize the cell capacity of the $LiFePO_4$/graphite lithium-ion batteries.

• 한국환경과학회지
• /
• 제5권5호
• /
• pp.593-603
• /
• 1996

용응탄산염 연료전지의 산소전극성능모사를 위한 이중기공구조의 filmed agglomerate model을 연구하였다. 이 모델에서는 전극과 전해질 계면의 물리, 화학적인 현상 및 전극반응기구를 고려하여 정상상태 에서 전극의 특성을 조업조건에 따라 표시할 수있다. 기존의 연구에서 기하학적인 구조를 가정하여 전극반응면적을 이론적으로 계산한 반면에 본 연구에서는 porosimeter를 이용한 기공도와 기공구조 분포 측정자료를 이용한 방법을 제시하였다. 계산결과는 전극재질, 기체조성, 전극두께, agglomerate 기공도 및 전해질 막의 두께에 따른 영향을 전류밀도와 과전압의 관계로 표시하였다. 또한 전극 재질로 perovskite (La0.8Sr0.2CoO3)와 NiO를 사용하여 실제전지를 이용한 성능을 측정하여 이론치와 비교하였다. 두전 극의 반쪽전지 실험에서 유사한 성능을 나타내었다. Perovskite 전극은 전극 기공도 65%, agglomerate 기공도 12% 그리고 전극두께 1.5~2mm에서 최적의 결과를 보여주었다. NiO전극의 경우 peroxide 반응기구에서 superoxide 반응기구의 계산결과보다 실험치와 일치하는 좋은 결과를 보였다.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.149-155
• /
• 2018

본 논문에서는 전기영상법(ET)을 이용하여 수직 다층구조 대지저항률을 영상복원 하였다. 일반적으로 접지 시공을 위한 대지 분석은 수평 다층 구조라는 가정 하에 행해지지만, 현실적으로는 지하구조가 수직 구조일 경우도 발생하게 된다. 여기에서는 수직 다층구조의 대지분석에 유리한 전극배열법을 찾아내기 위하여 전기영상법에 가장 널리 사용되는 Wenner, Schlumberger 그리고 쌍극자배열을 테스트하였다. ET영상복원에는 Gauss-Newton 역산 알고리즘이 이용되었다. RMS 오차 분석결과를 보면 Wenner 배열의 경우가 RMS 오차가 가장 적게 나타나는 것을 확인할 수 있었다.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1103-1108
• /
• 2010

A grounding electrode has the transient grounding impedance characteristics against lightning surges. So the performance of grounding electrodes should be evaluated as a grounding impedance as well as the ground resistance. The frequency-dependent grounding impedance is varied with the shape and size of grounding electrode and is divided into both inductive and capacitive behaviors. This paper presents a theoretical analysis for the grounding impedance determined by the size of grounding electrode using the distributed parameter circuit model. EMTP and Matlab programs were used in calculating the frequency-dependent grounding impedances of vertical grounding electrodes. It was found that the frequency-dependent grounding characteristics of vertical grounding electrodes are characterized by the distributed parameters which are changed in the dimension of grounding electrodes.