A single step fabrication process of carbon nanotube/Prussian Blue (CNT/PB) paste electrodes based on screen printing technology has been studied as an amperometric sensor for the determination of hydrogen peroxide and free chlorine. Compared to the classical carbon paste (CP) electrode, the CNT paste electrode greatly enhanced the response in the presence of hydrogen peroxide due to the electrocatalytic activity of the CNT. Based on the CNT/binder paste, PB was also incorporated into a network of CNT paste and characterized. The best electroanalytical properties of PB-mixed sensors to hydrogen peroxide were obtained with PB ratio of 10 wt % composition, which showed fast response time ($t_{90}{\leq}5$ s; 0.2 - 0.3 mM), low detection limit of 1.0 ${\mu}M$, good linear response in the range from $5.0{\times}10^{-5}$ - $1.0{\times}10^{-3}$ mol $L^{-1}$ ($r^2$ = 0.9998), and high sensitivity of -8.21 ${\mu}AmM^{-1}$. In order to confirm the enhanced electrochemical properties of CNT/PB electrode, the sensor was further applied for the determination of chlorine in water, which exhibited a linear response behavior in the range of 50 - 2000 ppb for chlorine with a slope of 1.10 ${\mu}Appm^{-1}$ ($r^2$ = 9971).
Yoneyama 등이 2001년 기존의 potentiometry 형의 요소 센서보다 우수한 성능을 갖는ampeometry 정의 요소 센서를 제안한 이후, 전자 전달 메커니즘에 관한 관심이 집중되어 왔으나, urease로부터 전극 기질까지의 전자 전달 매질로서 전도성 고분자보다 쉽고 단순한 공정은 아직까지 제시된 바 없다. 본 논문에서는 전도성 고분자로서 polypyrrole(PPy)과 poly(3-methylthiophene)(P3MT)을 이용하여 다공성 실리콘(PS) 요소 센서를 제작하고 각각의 특성을 전기화학적으로 분석하였다. Urease 고정화 전압, 고정화 시간, 고정화 시의 효소 농도, 수소이온 농도 등이 감도에 미치는 영향은 PPy 와 P3MT 각각의 경우 유사한 경향성을 보였다. 감도 특성의 경우, PPy는 다공질 실리콘 전극과 평면 전극 각각에 대하여 1.55 ${\mu}A/mM{\cdot}cm^2$와 0.91 ${\mu}A/mM{\cdot}cm^2$였고, P3MT의 경우는 각각 8.44 ${\mu}A/mM{\cdot}cm^2$와 4.28 ${\mu}A/mM{\cdot}cm^2$의 감도를 보였다. 즉, PPy가 P3MT 보다 일반적으로 높은 감도를 보였고, 다공질 실리콘 전극을 사용하는 경우, 그렇지 않은 경우보다 약 2배외 감도 향상 효과를 기대할 수 있었다. 재현성이나 안정성의 경우는 P3MT 가 PPy 보다 우수하였다. 사용 빈도에 따른 감도 저하는 다공질 실리콘 전극의 경우 직선적으로 감소하셨으나 평면 전극의 경우는 지수함수적으로 감소하였다 시간에 따른 감도 저하 현상은 만15일 이후의 감도를 기준으로 하여, 10% 미만의 감도저하를 보임으로써 PPy, P3MT 모두 우수한 특성을 보였다.
본 논문에서는 Ta-N 스트레인게이지를 이용한 극한 환경용 세라믹 박막형 압력센서의 제작 및 특성에 관하여 연구하였다. 압력감지부로 Ta-N 스트레인게이지를 사용하였으며, SDB(Si-wafer Direct Bonding)와 전기화학적 식각정지법을 이용하여 매몰 cavity를 가지는 저가격 고수율의 Si 박막 다이어프램을 제작하였다. 또한, 실리콘 박막 다이어프램상에 박막형 스트레인게이지를 형성하여 세라믹 박막형 압력센서를 제작하였다. 제작된 세라믹 박막형 압력 센서는 기존의 스트레인 게이지를 이용한 로드셀에 비해서 온도특성이 우수하고 재현성, 소형화, 집적화 및 저가격화가 가능하기 때문에 고온, 고압 등의 각한 환경에서도 사용이 가능할 것으로 기대된다.
본 논문은 $n^{+}$ 에피택셜층을 이용한 전기화학 에칭스톱과 글라스-실리콘의 양극 접합기술을 이용하여 저 압력측정을 위한 용량형 압력센서를 제작한 것이다. 제작된 센서는 하이브리드형으로 센서 커패시터와 기준 커패시터를 갖는 센서 칩과 두가지 출력검출회로 칩으로 구성되어 있다. 이 제작된 센서는 다이아프램 크기가 $1.0{\times}1.0 mm^{2}$이고, 두께가 $10{\mu}m$로 제작된 센서는 압력이 인가되지 않을 때 용량의 크기가 7.1 pF이고, 10 KPa 압력에서 감도가 5.2 %F.S.이다. 또 용량을 전압으로 검출하는 컨버터회로를 이용할 경우, $5{\sim}45^{\circ}C$ 온도범위에서 영점 온도특성과 감도 온도특성은 각각 0.051 %F.S./$^{\circ}C$와 0.12 %F.S./$^{\circ}C$ 이다.
Liu, Fei;Ha, Hyun Dong;Han, Dong Ju;Park, Min Su;Seo, Tae Seok
한국진공학회:학술대회논문집
/
한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
/
pp.281.2-281.2
/
2013
Since heavy metal ions included in water or food resources have critical effects on human health, highly sensitive, rapid and selective analysis for heavy metal detection has been extensively explored by means of electrochemical, optical and colorimetric methods. For example, quantum dots (QDs), such as semiconductor QDs, have received enormous attention due to extraordinary optical properties including high fluorescence intensity and its narrow emission peaks, and have been utilized for heavy metal ion detection. However, the semiconductor QDs have a drawback of serious toxicity derived from cadmium, lead and other lethal elements, thereby limiting its application in the environmental screening system. On the other hand, Graphene oxide (GO) has proven its superlative properties of biocompatibility, unique photoluminescence (PL), good quenching efficiency and facile surface modification. Recently, the size of GO was controlled to a few nanometers, enhancing its optical properties to be applied for biological or chemical sensors. Interestingly, the presence of various oxygenous functional groups of GO contributes to opening the band gap of graphene, resulting in a unique PL emission pattern, and the control of the sp2 domain in the sp3 matrix of GO can tune the PL intensity as well as the PL emission wavelength. Herein, we reported a photoluminescent GO array on which heavy metal ion-specific DNA aptamers were immobilized, and sensitive and multiplex heavy metal ion detection was performed utilizing fluorescence resonance energy transfer (FRET) between the photoluminescent monolayered GO and the captured metal ion.
This study presents a simple approach for the assembly of a free-standing conductive electronic nanofilm of single-walled carbon nanotubes (SWNTs) suitable for enzymatic electrochemical biosensors. A large-scale SWNT electronic film was successfully produced by the dialysis of p-Terphenyl-4,4''-dithiol (TPDT)-treated SWNTs. Furthermore, Horseradish peroxidase (HRP) was immobilized on the TPDT-SWNT electronic film, and the enzymatic detection of hydrogen peroxide (H2O2) was demonstrated without mediators. The detection of H2O2 in the negative potential range (-0.4 V vs. Ag/AgCl) was achieved by direct electron transfer of heme-based enzymes that were immobilized on the TPDT-SWNT electronic film. The SWNT-based biosensor exhibited a wide detection range of H2O2 from 10 µM to 10 mM. The HRP-doped SWNT electronic film achieved a high sensitivity of 342 ㎛A/mM·cm2 and excellent selectivity against a variety of redox-active interfering substances, such as ascorbic acid, uric acid, and acetaminophen.
[ $Febry-P{\acute{e}}rot$ ] 프린지 패턴 (fringe pattern)과 광발광성 (photoluminescence, PL)의 광학적 성질을 동시에 가지고 있는 다공성 실리콘을 이용하여 가스센서를 개발하였다. 다공성 실리콘 샘플은 p-type 실리콘 웨이퍼 (boron-doped, <100> orientation, resistivity $1{\sim}10{\Omega}$)를 이용하여 전기화학적 식각을 통하여 만들어 졌다. 다공성 실리콘 샘플들은 열적 산화 방법과 hydrosilylation 방법을 통하여 그 표면이 수소로 종결된 다공성 실리콘 (Si-H)과 산화된 다공성 실리콘(Si-OH), 두 가지 각각 다른 표면 성질을 갖는 다공성 실리콘을 제작 하였다. 준비된 두 가지 다른 다공성 실리콘 칩들은 메탄올, 아세톤, 헥산, 그리고 톨루엔의 증기에 노출 시켰을 때 Febry-P rot 프린지 패턴의 변화나 PL의 변화를 관측하여 다공성 실리콘을 이용한 VOCs (volatile organic compounds) 센서로서의 응용에 대하여 연구하였다. $Febry-P{\acute{e}}rot$ 프린지 패턴은 유기 물질의 증기압이 클수록 단파장으로 이동하는 폭이 컸고, 광 발광성은 극성도가 큰 물질일수록 소강현상이 크게 일어나는 것을 알 수 있었다.
In this paper, we describe the fabrication and characterization of a hydrogen peroxide ($H_2O_2$) sensor based on palladium and copper (PdCu) electroplated laser induced graphene (LIG) electrodes. $CO_2$ laser was used to form LIG electrodes on a PI film. This fabrication method allows simple control of the LIG electrode size and shape. The PdCu was electrochemically deposited on the LIG electrodes to improve the electrocatalytic reaction with $H_2O_2$. The electrochemical performance of this sensor was evaluated in terms of selectivity, sensitivity, and linearity. The physical characterization of this sensor was conducted using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), which confirmed that PdCu was formed on the laser induced graphene electrode. In order to increase the sensor sensitivity, the Pd:Cu ratio of the electroplated PdCu was varied to five different values and the condition of highest amperometric current at an identical of $H_2O_2$ concentration was chosen among them. The resulting amperometric current was highest when the ratio of Pd:Cu was 7:3 and this Pd;Cu ratio was employed in the sensor fabrication. The fabricated PdCu/LIG electrode based $H_2O_2$ sensor exhibited a sensitivity of $139.4{\mu}A/mM{\cdot}cm^2$, a broad linear range between 0 mM and 16 mM of $H_2O_2$ concentrations at applied potential of -0.15 V, and high reproducibility (RSD = 2.6%). The selectivity of the fabricated sensors was also evaluated by applying ascorbic acid, glucose, and lactose separately onto the sensor in order to see if the sensor ourput is affected by one of them and the sensor output was not affected. In conclusion, the proposed PdCu/LIG electrode based $H_2O_2$ sensor seems to be suitable $H_2O_2$ sensor in various applications.
고체전지, 산화물연료전지, 센서, 산화물 분리막 등 에너지 재료로 활용이 무궁한 산소 이온 전도체 중 acceptor가 첨가된 $LaAlO_3$의 전기적 특성과 고온에서의 혼합전도체로 사용 가능성을 연구하였다. Sr과 Mg을 $LaAlO_3$에 동시에 첨가하여 만든 LSAM의 전기적 특성을 교류(a.c.)와 직류(d.c.) 방법을 이용하여 다양한 산소 분압에서 측정하였다. 교류 임피던스 방법을 이용하여 LSAM의 전체 저항에서 입자(grain) 저항과 입계(grain boundary) 저항을 분리한 결과, $550^{\circ}C$ 이하의 온도에서는 입계 저항이 지배적이나 $800^{\circ}C$ 이상의 온도에서는 입자 저항이 대부분임을 알 수 있었다. 또 산소분압에 따른 전도도 측정을 물질의 결함모델(defect model)을 이용하여 분석해 전체 전도도를 이온 전도도와 전자 전도도로 분리하였다. 그 결과, $800^{\circ}C$ 이상의 고온에서 LSAM은 낮은 산소분압($Po_2$ < $10^{-10}atm$)에서는 산소이온 전도체이고 높은 산소분압($Po_2$ > $10^{-5}atm$)에서는 혼합전도체의 거동을 보였다. 또 온도가 증가하여도 산소이온 전도가 주도적인 산소분압의 영역은 줄어들지 않았고 낮은 산소분압에서도 안정적인 전기적 특성을 보이는 등으로 보아, LSAM은 고온의 낮은 산소분압(T > $1500^{\circ}C$, $Po_2$ < $10^{-10}atm$) 조건에서 용강에서의 산소이온센서와 같은 산소이온체로의 사용 가능성이 높다.
본 논문에서는 레이저 유도에 의한 그래핀 합성 기술 및 이를 이용한 전기/전자 소자 제조 기술과 다양한 소자 제조 기술을 검토하였다. 최근까지 개발되고 있는 3차원 그래핀 구조 활용으로 설계된 마이크로/나노 패턴화는 효율적인 제조공정으로 인하여 많은 각광을 받고 있으며, 차세대 기판 소재로의 응용까지 다양하게 개발되고 있다. 산업에서 요구하는 실제적인 적용 연구의 예들은, 레이저의 파장대역 선택, 출력 조정 및 광 간섭 기술 응용 등의 점진적인 해결방안 논의를 통해 큰 발전 가능성을 보여주고 있다. 기존의 그래핀의 전기/전자 소자 장치로의 응용 확장성은 이미 검증된 바 있으며, 새로운 합성 방식 및 기판 적용 기술은 마이크로 패키징 기술과의 통합 운용으로, 바이오센서, 슈퍼커패시터, 다공성 전기화학 센서 등 응용분야가 매우 다양하다. 본 논문에서 소개하는 레이저 기반 그래핀 가공 기술은 가까운 미래에 휴대형 소형 전자기기 및 전자 소자에 쉽게 적용 가능하리라 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.