• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 추계총회 및 학술발표회
• /
• pp.57-57
• /
• 2002

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 전지기술 심포지움
• /
• pp.41-58
• /
• 1998

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 추계총회 및 학술발표회
• /
• pp.32-32
• /
• 2003

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.13-14
• /
• 1990

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.330-335
• /
• 2020

Silicon surface nanostructures, which can be easily prepared by electrochemical etching, have attracted considerable attention because of its useful physical properties that facilitate application in diverse fields. In this work, electrochemical and electrochemical-scanning tunneling microscopic (EC-STM) techniques were employed to study the evolution of surface morphology during the electrochemical etching of Si(111)-H in a fluoride solution. The results exhibited that silicon oxide of the Si(111) surface was entirely stripped and then the surface became hydrogen terminated, atomically flat, and anisotropic in the fluoride solution during chemical etching. At the potential more negative than the flat band one, the surface had a tendency to be eroded very slowly, whereas the steps of the terrace were not only etched quickly but the triangular pits also deepened on anodic potentials. These results provided information on the conditions required for the preparation of porous nanostructures on the Si(111) surface, which may be applicable for sensor (or device) preparation (Nanotechnology and Functional Materials for Engineers, Elsevier 2017, pp. 67-91).

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 추계총회 및 학술발표회
• /
• pp.56-56
• /
• 2002

• 대한화학회지
• /
• 제68권2호
• /
• pp.117-120
• /
• 2024

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.499-512
• /
• 1994

The purpose of this study was to evaluate the microleakage electrochemically using different retrograde filling materials, different root resection angle, and different cavity preparation instruments. 104 extracted single-rooted teeth were selected for this study. 100 teeth were used as experimental groups and four was used as controls. Anatomical crowns were resected, root canals were prepared, and the apical 2 mm of roots were removed. The experimental roots were randomly divided into five equal groups. Experimental groups : Group 1. no bevel, cavity preparation with ultrasonic instruments, amalgam filling Group 2. no bevel, cavity preparation with ultrasonic instruments, SuperEBA cement filling Group 3. no bevel, cavity preparation with ultrasonic instruments, desiccated ZOE filling Group 4. $45^{\circ}$ bevel, cavity preparation with ultrasonic instruments, amalgam filling Group 5. no bevel, cavity preparation with conventional bur, amalgam filling Microleakage was measured once a day for 30 days using electrochemical method and were analyzed statistically. The results were as follows : 1. The group with Super EBA cement filling showed the least marginal leakage from second to fourth day(p<0.05), there was no significant difference between the group with amalgam filling during eighth to eighteenth day(p>0.05), but after the nineteenth day here was a higher marginal leakage than the group with amalgam filling(p<0.05). 2. The group with desiccated ZOE filling demostrated that the highest marginal leakage, started on the eighth day(p<0.05). 3. The group using ultrasonic instrument showed lower marginal leakage than the group using bur until the nineteenth day(p<0.05), but there was no significant differnce with the group using bur after twentythird day(p>0.05). 4. The group without bevel showed lower marginal leakage than the group with bevel (p<0.05). 5. Whether bevel or nor had much more effect on marginal leakage than with cavity perparation instrument when the cavity was retrogrdefilled with amalgam(stepwise regression).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1226-1229
• /
• 2004

Supercapacitors, also known as electrochemical capacitors, are being extensively studied due to an increasing demand for energy-storage systems. These devices offer many advantages over conventional secondary batteries, which include the ability of fast charge propagation, long cycle-life and better storage efficiency. That is to say supercapacitor bridges the gap between conventional capacitors and batteries. A new type electric double layer capacitor (EDLC) also called supercapacitors. Recently, supercapacitors concerns about their high power density and energy density. So we experiment with EDLC by using carbon nanofibers (CNFs) and DAAQ(1,5-diaminoanthraquinone) electrode. The electrode for supercapacitor was prepared by synthesis of DAAQ covered CNFs. CNFs could be covered with very thin DAAQ oligomer from the results of CV, XRD, DSC, SEM images, and TEM images. Dissolved electrode active material in NMP solution has been drop-coated on carbon plate. Its electrochemical characteristics were investigated by cyclic voltammograms. And compared with different electrolyte of aqueous type. As a result, CNFs coated by DAAQ composite electrode showed relatively good electrochemical behaviors with respect to specific capacity and scan rate dependency.

• 공업화학
• /
• 제20권1호
• /
• pp.28-33
• /
• 2009

카본나노튜브에 담지된 몰리브데늄 카바이드 촉매를 다양한 제조 조건을 통해 제조하여 촉매특성을 분석하였고, 메탄올의 전기화학적 산화반응을 통해 촉매의 활성을 비교하였다. 촉매로써 전이금속의 낮은 활성을 극복하기 위한 방안으로 카본나노튜브를 지지체로 사용하였으며 전구체의 양 및 종류, 지지체의 산처리 방법, 탄화공정 온도조건 등을 변화하여 촉매를 제조하였다. 제조된 촉매는 ICP-AES, XRD, TEM을 통하여 촉매의 특성을 분석하였고, 메탄올의 전기화학적 산화반응을 통해 촉매의 활성을 비교하였다. 몰리브데늄 카바이드 촉매($Mo_2C/CNT$)의 다양한 제조방법으로 입자크기와 담지량을 변화시킬 수 있었으며, 입자의 크기와 담지량의 변화에 따른 전기화학적 산화반응의 특성을 설명할 수 있었다.