• Journal of the Korean Society of Tobacco Science
• /
• v.31 no.1
• /
• pp.39-44
• /
• 2009

Hydrogen cyanide (HCN) is present in both the particulate and vapor phase of cigarette mainstream smoke. It is one of the 44 harmful substances on Hoffmann's list and is known to be a major ciliatoxic agent in cigarette mainstream smoke. Typically the determination of HCN in cigarette mainstream smoke has been done through colorimetric and electrochemical techniques, such as UV-spectrophotometry (UV), continuous flow analyzer (CFA), ion chromatography (IC) and capillary GC-ECD. In particular, CFA commonly has been using analysis hydrogen cyanide in cigarette smoke and the basic principle is pyridine-pyrazolone reaction. In this study, the more optimized analytical method is suggested isonicotinic acid-pyrazolone reaction method than previous pyridine-pyrazolone reaction method, a commonly used method for the determination of cyanide in water and air, by CFA. Sample collection was optimized by trapping particulate and vapor phase of smoke separately. The optimum NaOH concentration of the trapping solution was shown to be 0.2 M. HCN was stable up to 6 hours in this concentration but only 3 hours in 0.1 M solution. The sensitivity of this method was fairly good and it might be used in analysis of HCN in cigarette mainstream smoke.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.73.2-77
• /
• 2000

A possibility of the implementation of a quartz crystal sensor to the detennination of chemical oxygen demand is examined by checking the electrochemical behavior of the sensor in a glucose solution. Since the surface of a quartz crystal has to be oxidized, a relatively active metal is coated on the surface of a usual 9 MHz AT-cut crystal. The electrochemical behavior is investigated by measuring the changes of current, resonant frequency and resonant resistance while a constant potential is applied. The crystal is installed in a specially designed container, and a QUartz crystal analyzer is utilized to measure the frequency and resistance simultaneously. The variations of the measurements are examined at different concentrations of glucose solution and the effect of the concentration is analyzed to find a proper relation between the concentration and the measurements. It is fOlmd that a linear relation between the concentration of less than 900 Dpm and the peak current when a constant potential of -180 m V vs. Ag/ AgCI reference is applied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2014-2021
• /
• 1999

The present investigation is concerned with the degradation characteristics of cast stainless steel(CF8M), exposed to the $\sigma$-phase degradation at $700^{\circ}C$. In the present paper, the degradation of CF8 M at $700^{\circ}C$ is evaluated by a non-destructive test, DL-EPR(double loop electrochemical potentiokinetic reactivation). The surface of specimens is observed by using scanning electron microscopy after DL-EPR test. Also. chromium contents of matrix, grain boundary and ferrite phase are analyzed by electron probe X-ray micro analyzer. Through the experiments, the following results are obtained 1) The degree of sensitization(DOS) of CF8M aged up to 15hr at $700^{\circ}C$ is increased with acing time while that is decreased with aging time from 15hr to 150hr. 2) The impact energy decreases with increase of $\sigma$-phase while DOS increases with $\sigma$-phase until aging time reaches to 15hr. After the aging time. 15hr, the $\sigma$-phase and the rate of impact energy with respect to aging time decreases. Therefore the degradation behavior of the CF8M can be evaluated by comparing SEM micrographs and the value of DOS.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.3
• /
• pp.130-134
• /
• 2005

To the best knowledge, the formation and characterization of InSb nanowires have not been reported yet in spite of its good characteristics as a III-V compound semiconductor. The nanowire arrays were potentiostatically electrodeposited in a mixing solution of indium chloride, antimony chloride, citric acid, and potassium citrate according to our previous work on the electrodeposition of the stoichiometric InSb films. The electrical properties of nanowire arrays were measured by semiconductor parameter analyzer, and the microstructural analysis of the nanowires was conducted by employing XRD. Our experimental results indicate that the InSb nanowires have a highly preferred orientation of (220) direction and also exhibit electrical characteristics of n-type semiconductors which we, however, similar to semi-metals mainly due to their narrow band-gap and high electron mobility.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.725-729
• /
• 2014

In this study, a transparent conductive oxide (TCO)-less dye-sensitized solar cells (DSSCs) was fabricated by using titanium (Ti) electrode to replace the Fluorine-doped tin oxide (FTO) for the reduction of manufacturing cost. Ti film was formed by electron beam evaporation method and the results showed the sheet resistance of Ti electrodes with a thikness of 500 nm similar to FTO. In case of power conversion efficiency (PCE), a DSSC with Ti electrodes showed a lower value than that with FTO by 0.38%. For the investigation of the difference, the DSSCs were measured and analyzed by using electrochemical impedance analyzer (EIS).

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.125-131
• /
• 2007

Hydrogen cyanide(HCN), formed from pyrolysis of various nitrogenous compounds such as protein, amino acids and nitrate in tobacco, is present in both the particulate phase and vapor phase of cigarette smoke. Typically the determination of HCN in cigarette smoke has been done through colorimetric and electrochemical techniques, such as fluorescence spectrometry, UV-spectrophotometry (UV), continuous flow analyzer (CFA), capillary GC-ECD and ion chromatography (IC). Most of these techniques are known to be time-consuming and some of them lack specificity or sensitivity. The available results from both our laboratory and reported literatures for 2R4F Kentucky reference cigarette, smoked under ISO condition, show a relatively wide variation ranging from 100 to 120 ug/cig of HCN. Especially, the precision and accuracy of the analytical results of HCN tend to get worse in low tar cigarettes and under intense smoking condition. In this paper, a more optimized analytical methods than previous ones are suggested. This method shows lower detection limit and has improved precision and accuracy, so it is applicable for wide tar level cigarettes under intense smoking condition as well as under ISO smoking condition. Important features of this method are improved sample collection and quantification systems such as the number of trapping units, volume, temperature and type of trapping solution. To avoid volatilization loss of HCN in analyzing mainstream smoke, it is highly recommended that pH values of trapping solutions should be maintained over 11 and cold traps should be used in collecting mainstream smoke.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.300-311
• /
• 2019

The corrosion behaviors of twinning-induced plasticity (TWIP) steels with different alloying elements (Cu, Al, Si) in a neutral aqueous environment were investigated in terms of the characteristics of the corrosion products formed on the steel surface. The corrosion behavior was evaluated by measuring potentiodynamic polarization test and electrochemical impedance spectroscopy. For compositional analysis of the corrosion products formed on the steel surface, an electron probe x-ray micro analyzer was also utilized. This study showed that the addition of Cu to the steel contributed to the increase in corrosion resistance to a certain extent by the presence of metallic Cu in discontinuous form at the oxide/steel interface. Compared to the case of steel with Cu, the Al-bearing specimen exhibited much higher polarization resistance and lower corrosion current by the formation of a thin Al-enriched oxide layer. On the other hand, Si addition (3.0 wt%) to the steel led to an increase in grain size, which was twice as large as that of the other specimens, resulting in a deterioration of the corrosion resistance. This was closely associated with the localized corrosion attacks along the grain boundaries by the formation of a galvanic couple with a large cathode-small anode.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.130-133
• /
• 2003

3,4-dihydroxybenzoic acid(3,4-DHBA) was electropolymerized on glassy carbon electrode to give the GC/p-3,4-DHBA type electrode which was modified with dopamine by the help of 1-(3-dimethylaminopropyl)-3-ethyl carbodiimide hydrochloride(EDC) acting as a coupling agent. The carboxylic sites on the polymeric surface of p-3,4-DHBA and mine group at the dopamine gave a QCA(Au)/p-3,4-DHBA-dopamine type of modified electrodes. The o-quinone moieties at the electrode surface exhibited high selectivity to titanium ions in solution. The redox process of the electrode is hydroquinone : quinone +$2H^+2e^-$, which had two strong and two weak pairs of peaks at CV. The modified electrode can deposit Ti(IV) ions as much as $4.13\times10^{-5}gcm^{-2}$. The calibration curve of the electrodes, log of the surface coverage-normalized redox response vs log[Ti], exhibited an excellent correlation$(r{\geq}0.997)$ for titanium concentrations ranging from $5.25\times10^{-4}\;to\;5.25\tiems10^{-8}M.$.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.34-39
• /
• 2009

In this study, a needle coke was oxidized in a mixture of dilute nitric acid and sodium chlorate ($NaClO_3$) solutions and followed by heat treatment. The samples were analyzed with using XRD, FESEM, elemental analyzer, BET, and Raman spectroscopy. Double layer capacitance was measured with the charge and discharge measurements. The consisting layers of the needle coke were expanded to single phase showing only (001) diffraction peak by the acid treatment for 24 hours. The oxidized coke returned to a graphite structure appearing (002) peak after heat treatment above $200^{\circ}C$. The structure returned could be more easily accessible to the ions by the first charge, and improve the double layer capacitance at the second charge. The two-electorde cell from acid treated coke and $300^{\circ}C$ heat treatment exhibited the maximum capacitances of 32.1 F/g and 29.5 F/ml at the potential of $0{\sim}2.5\;V$.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1295-1296
• /
• 2008

Hydrogen peroxide ($H_2O_2$) biosensor is one of the most developing sensors because this kind of sensors is highly selective and responds quickly to the specific substrate. Hemoglobin (Hb) has been used as ideal biomolecules to construct hydrogen peroxide biosensors because of their high selectivity to $H_2O_2$. The direct electron transfer of Hb has widely investigated for application in the determination of $H_2O_2$ because of its simplicity, high selectivity and intrinsic sensitivity. An electrochemical detection for hydrogen peroxide was investigated based on immobilization of hemoglobin on DNA/Fe(pyterpy)$^{2+}$ modified gold electrode. The pyterpy monolayers were firstly an electron deposition onto the gold electrode surface of the quartz crystal microbalance (QCM). It is offered a template to attach negatively charged DNA. The fabrication process of the electrode was verified by quartz crystal analyzer (QCA). The experimental parameters such as pH, applied potential and amperometric response were evaluated and optimized. Under the optimized conditions, this sensor shows the linear response within the range between $3.0{\times}10^{-6}$ to $9.0{|times}10^{-4}$ M concentrations of $H_2O_2$. The detection limit was determined to be $9{\times}10^{-7}$ M (based on the S/N=3).