• 한국재료학회지
• /
• 제25권3호
• /
• pp.113-118
• /
• 2015

To improve the methanol electro-oxidation in direct methanol fuel cells(DMFCs), Pt electrocatalysts embedded on porous carbon nanofibers(CNFs) were synthesized by electrospinning followed by a reduction method. To fabricate the porous CNFs, we prepared three types of porous CNFs using three different amount of a styrene-co-acrylonitrile(SAN) polymer: 0.2 wt%, 0.5 wt%, and 1 wt%, respectively. A SAN polymer, which provides vacant spaces in porous CNFs, was decomposed and burn out during the carbonization. The structure and morphology of the samples were examined using field emission scanning electron microscopy and transmission electron microscopy and their surface area were measured using the Brunauer-Emmett-Teller(BET). The crystallinities and chemical compositions of the samples were examined using X-ray diffraction and X-ray photoelectron spectroscopy. The electrochemical properties on the methanol electro-oxidation were characterized using cyclic voltammetry and chronoamperometry. Pt electrocatalysts embedded on porous CNFs containing 0.5 wt% SAN polymer exhibited the improved methanol oxidation and electrocatalytic stability compared to Pt/conventional CNFs and commercial Pt/C(40 wt% Pt on Vulcan carbon, E-TEK).

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.345-353
• /
• 2018

This paper summarizes results of research on the electrochemical (EC) degradation of disinfection by-products (DBPs) and iodine-containing contrast media (ICMs), with the focus on EC reductive dehalogenation. The efficiency of EC dehalogenation of DBPs increases with the number of halogen atoms in an individual DBP species. EC reductive cleavage of bromine from parent DBPs is faster than that of chlorine. EC data and quantum chemical modeling indicate that the EC reduction of iodine-containing DBPs (I-DBPs) is characterized by the formation of active iodine that reacts with the organic substrate. The occurrence of ICMs has attracted attention due to their association with the generation of I-DBPs. Indirect EC oxidation of ICMs using anodes that produce reactive oxygen species can result in a complete degradation of these compounds yet I-DBPs are formed in the process. Reductive EC deiodination of ICMs is rapid and its overall rate is diffusion-controlled yet I-DBPs are also produced in this reaction. Further progress in practically feasible EC methods to remove DBPs, ICMs and other trace-level organic contaminants requires the development of novel electrocatalytic materials, elimination of mass transfer limitations via innovative design of 3D electrodes and EC reactors, and further progress in the understanding of intrinsic mechanisms of EC reactions of DBPs and TrOC at EC interfaces.

• 대한화학회지
• /
• 제67권5호
• /
• pp.339-347
• /
• 2023

In this study, a nanocomposite of multi-walled carbon nanotubes@poly(p-phenylenediamine)-Prussian blue (MWCNTs@PpPD-PB) was synthesized and employed for the electrochemical detection of hydrogen peroxide (H₂O₂). A straightforward approach was utilized to prepare an electrochemical H₂O₂ sensor using a MWCNTs@PpPD-PB modified glassy carbon electrode, and its electrochemical behavior was investigated through techniques such as electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The modified electrode displayed a favorable electrocatalytic response towards the reduction of H₂O₂ in an acidic solution. The developed sensor exhibited linearity in the concentration range of 0.005 mM to 2.225 mM for H₂O₂, with high sensitivity (583.6 ㎂ mM^-1cm^-2) and a low detection limit (0.95 ㎛, S/N = 3) at an applied potential of +0.15 V (vs. Ag/AgCl). Additionally, the sensor demonstrated excellent selectivity, reproducibility, and stability. Moreover, successful detection of H₂O₂ was achieved in real samples.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.672-678
• /
• 2006

A new approach to fabricate an enzyme electrode was described based on the immobilization of horseradish peroxidase (HRP) on dithiobis-N-succinimidyl propionate (DTSP) self-assembled monolayer (SAM) formed on gold-nanoparticles (Au-NPs) which were electrochemically deposited onto glassy carbon electrode (GCE) surface. The overall surface area and average size of Au-NPs could be controlled by varying deposition time and were examined by Field Emission-Scanning Electron Microscope (FE-SEM). The $O_2$ reduction capability of the surface demonstrated that Au-NPs were thermodynamically stable enough to stay on GCE surface. The immobilized HRP electrode based on Au-NPs/GCE presented faster, more stable and sensitive amperometric response in the reduction of hydrogen peroxide than a HRP immobilized on DTSP/gold plate electrode not containing Au-NPs. The effects of operating potential, mediator concentration, and pH of buffer electrolyte solution on the performance of the HRP biosensor were investigated. In the optimized experimental conditions, the HRP immobilized GCE incorporating smaller-sized Au-NPs showed higher electrocatalytic activity due to the high surface area to volume ratio of Au-NPs in the biosensor. The HRP electrode showed a linear response to $H_2O_2$ in the concentration range of 1.4 $\mu$M-3.1 mM. The apparent Michaelis-Menten constant ($K _M\; ^{app}$) determined for the immobilized HRP electrodes showed a trend to be decreased by decreasing size of Au-NPs electrodeposited onto GCE.

• 전기화학회지
• /
• 제12권1호
• /
• pp.11-25
• /
• 2009

연료전지는 가까운 미래를 위한 핵심 청정 신에너지원 중의 하나로 기대된다. 그러나 고분자 연료전지에서 공기극은 느린 산소환원반응과 많은 백금 사용 때문에 상업화에 어려움을 겪고 있으며, 이것을 해결하는 것이 최근 당면 과제이다. 또한 연료극은 일산화탄소의 피독 현상과 전극의 안정성이 문제시 되고 있다. 본 총설에서는 고분자 연료전지를 위한 연료극, 공기극 전기화학 촉매의 이론적 접근을 통해 촉매를 설계하는 최근 연구 내용을 소개하려 한다. 촉매 설계는 합금 전기 화학 촉매를 통해 접근 했으며, 이는 electronic, geometric, lateral effects를 손쉽게 조절할 수 있게 한다. 이것은 계산되어진 d-band center의 함수에 의존하며, 촉매의 활성과 큰 관계를 가짐을 발견하였다. 본고에서 지향하는 촉매의 최종 방향은 이론적 접근을 통해서 촉매의 사용량을 줄이면서 효율적으로 사용하는 것이다.

• 공업화학
• /
• 제31권5호
• /
• pp.581-584
• /
• 2020

The effect of a chemical pretreatment on the surface carbon was investigated using a scanning electron microscope (SEM) and electrochemical methods. Primitive carbon has a reducing power likely due to incompletely oxidized functional groups on the surface. We aim to control this reducing power by chemical treatment and apply for the spontaneous deposition of nanoparticles (NPs). Highly ordered pyrolytic graphite (HOPG) was initially treated with a reducing agent, NaBH4 or an oxidizing agent, KMnO₄, for 5 min. Subsequently, the pretreated carbon was immersed in a platinum (Pt) precursor. Unexpectedly, SEM images showed that the reducing agent increased spontaneous PtNPs deposition while the oxidizing agent decreased Pt loading more as compared to that of using bare carbon. However, the amount of Pt on the carbon obviously decreased by NaBH₄ treatment for 50 min. Secondly, spontaneous reduction on pretreated glassy carbon (GC) was investigated using the catalytic hydrogen evolution reaction (HER). GC electrode treated with NaBH4 for a short and long time showed small (onset potential: -640 mV vs. MSE) and large overpotential for the HER, respectively. Although the mechanism is unclear, the electrochemistry results correspond to the optical data. As a proof-of-concept, these results demonstrate that chemical treatments can be used to design the shapes and amounts of deposited catalytic metal on carbon by controlling the surface state.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.475-481
• /
• 2013

By using ionic liquid 1-hexylpyridinium hexafluorophosphate ($HPPF_6$) based carbon ionic liquid electrode (CILE) as the substrate electrode, a $CoMoO_4$ nanorods and myoglobin (Mb) composite was casted on the surface of CILE with chitosan (CTS) as the film forming material to obtain the modified electrode (CTS/$CoMoO_4$-Mb/CILE). Spectroscopic results indicated that Mb retained its native structures without any conformational changes after mixed with $CoMoO_4$ nanorods and CTS. Electrochemical behaviors of Mb on the electrode were carefully investigated by cyclic voltammetry with a pair of well-defined redox peaks from the heme Fe(III)/Fe(II) redox center of Mb appeared, which indicated that direct electron transfer between Mb and CILE was realized. Electrochemical parameters such as the electron transfer number (n), charge transfer coefficient (${\alpha}$) and electron transfer rate constant ($k_s$) were estimated by cyclic voltammetry with the results as 1.09, 0.53 and 1.16 $s^{-1}$, respectively. The Mb modified electrode showed good electrocatalytic ability toward the reduction of trichloroacetic acid in the concentration range from 0.1 to 32.0 mmol $L^{-1}$ with the detection limit as 0.036 mmol $L^{-1}$ ($3{\sigma}$), and the reduction of $H_2O_2$ in the concentration range from 0.12 to 397.0 ${\mu}mol\;L^{-1}$ with the detection limit as 0.0426 ${\mu}mol\;L^{-1}$ ($3{\sigma}$).

• 청정기술
• /
• 제23권3호
• /
• pp.308-313
• /
• 2017

본 연구에서는 Graphite Felt (GF) 전극의 표면에 산소와 질소의 도핑을 통하여 전기화학적 특성을 개선하고, 이의 촉매화학적 효과를 바나듐 레독스 흐름전지의 양극과 음극의 특성비교를 통하여 관찰하였다. 탄소전극 표면의 산소와 질소 동시 도핑은 GF 샘플을 773 K에서 암모니아-공기 ($NH_3=50%$, $O_2=10%$) 혼합가스에 노출시켜 Chemical Vapor Deposition (CVD) 방법으로 제조하였다. 이러한 산소-질소 동시 도핑의 전기화학적 효과는 산소만으로 도핑 처리된 GF 샘플과 비교하여 분석, 평가하였다. 탄소전극 샘플들의 표면 구조와 화학적 조성은 Scanning Electron Microscopy (SEM)와 X-ray Photoelectron Spectroscopy (XPS) 방법을 통하여 분석하였다. 결과물로 얻어진 탄소전극은 바나듐 레독스-흐름전지의 양극과 음극에 동시 적용하여 충-방전 사이클을 진행하고, 각 전극이 흐름전지의 효율과 양극과 음극에서의 전기화학적 특성에 미치는 효과를 비교하여 분석하였다. 산소와 질소의 동시 도핑으로 처리된 GF 전극은 산소만으로 활성화된 전극에 비하여 흐름전지의 전압 및 에너지 효율에서 2% 이상의 향상 효과를 보여주었다. 특히, 탄소전극 표면의 산소-질소의 동시 도핑은 음극반응에서 우수한 전기화학적 특성을 유도하는 것을 확인하였다.

• 분석과학
• /
• 제11권6호
• /
• pp.460-468
• /
• 1998

$SOPDH_2$, $SNDH_2$, $EBNH_2$, $PBNH_2$ Schiff base 리간드와 이들의 [$Co(II)(SND)(H_2O)_2$], [$Co(II)(SOPD)(H_2O)_2$], [$Co(II)(EBN)(H_2O)$], [$Co(II)(PBN)(H_2O)$] 착물들을 합성하였다. Co(II) 착물들에서 Schiff base 리간드와 Co(II)의 몰 결합 비는 1:1로 주어졌으며 6배위 결합을 합성하였다. Co(II) 착물이 수식된 유리질 탄소전극을 사용하여 1 M KOH 수용액에서 산소 환원 반응을 순환 전압전류법으로 알아보았다. Schiff base Co(II) 착물이 수식된 전극에서의 산소의 환원 전류는 알몸 유리질 탄소전극에서 보다 더 증가하였고 환원 전위는 양전위 방향으로 더 이동하였다. 산소 환원 반응에 관여한 전자수와 교환 속도 상수 값은 순환 전압전류 곡선으로부터 구하였다. 산소 환원 반응경로는 최종 생성물이 $H_2O_2$로 가는 $2e^-$ 전이 반응을 나타내었으며 촉매가 수식된 전극에서의 교환 속도 상수는 알몸전극의 값에 비해 약 2~10배 정도 증가하였다.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.18-25
• /
• 2008

The membrane electrode assembly(MEA) was prepared by a nonequilibrium impregnation- reduction (I-R) method. Nafion 117 and covalently cross-linked sulfonated polyetherether with tungsto- phosphoric acid (CL-SPEEK/TPA30) prepared by our laboratory, were chosen as polymer electrolyte membrane(PEM). $Pt(NH_3)_4Cl_2$, $RuCl_3$ and reducing agent $(NaBH_4)$ were used as electrocatalytic materials. Electrochemical activity surface area(ESA) and specific surface area(SSA) of Pt cathodic electrode with Nafion 117 were $22.48m^2/g$ and $23.50m^2/g$ respectively under the condition of 0.8 M $NaBH_4$. But Pt electrode prepared by CL-SPEEK/TPA30 membrane exhibited higher ESA $23.46m^2/g$ than that of Nafion 117. In case of Pt-Ru anodic electrode, the higher concentration of Ru was, the lower potential of oxygen reduction and region of hydrogen desorption was, and Pt-Ru electrode using 10 mM $RuCl_3$ showed best properties of SSA $34.09m^2/g$ with Nafion 117. In water electrolysis performance, the cell voltage of Pt/PEM/Pt-Ru MEA with Nafion 117 showed cell property of 1.75 V at $1A/cm^2$ and $80{\circ}C$. On the same condition, the cell voltage with CL-SPEEK/TPA30 was the best of 1.73 V at $1A/cm^2$.