• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.254-255
• /
• 2006

최근의 전력시스템 분야에서는 IT기술의 혁신적인 발전과 향후 전개될 유비쿼터스 네트워크 사회에서의 전력시스템 분야의 역할 및 발전 방향에 대한 많은 의견이 있었다. 이러한 노력은 IT기술과 유비쿼터스 네트워크 기술을 전력분야에 적용하여 지능화된 전력네트워크 감시 및 제어시스템을 구현하는 방향으로 전개되고 있다. 전력시스템을 구성하는 주요 시설물을 감시하고 유지하기 위한 방안으로 센서 및 센서네트워크의 구현을 통한 지능형 감시 체계를 구현하는 방법이 논의되고 있다. 전력계통시스템을 감시하기 위하여 사용되는 각종 센서 및 액츄에이터에서 계측된 데이터를 규격화하는 방법을 규정한 IEEE 1451 과 디지털변전소의 통신을 위한 프로토콜로 여겨지는 IEC 61850 규격은 전력설비내의 센서 및 센서네트워크를 구성하는 주요 프로토콜로서 프로토콜간의 상호 연계 및 변환 기술의 개발은 네트워크 시스템의 운용 성능에 직결된다. 그러므로 IEEE 1451과 IEC 61850의 연구를 통하여 최적의 지능형 전력네트워크 구현하기 위한 변환기술이 필요하다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.510-512
• /
• 2005

This paper introduces the development of automatic system for estimation of digital relay performance. We have developed an automatic estimation system "HRV2004(Himap Relay function Verifier 2004)" for digital relay in 2004 and it has been verified in the field for one years. This paper describes the development details and field experience of HRV2004. HRV2004 can perform a series of jobs required for the relay testing in one environment and could handle most of all models of protective relay currently produced by Hyundai Heavy Industries. The functionality of this program consists of GUI of relay setting for beginner, fault record analysis and relay performance estimation. The core of this system is an automatic reporting of estimation test. If user is only click a button for relay estimation and one will received testing report to deliver customer. Additional benefit is fast response than the manual estimation. For example, the manual estimation takes spending 6 hours but this system is about 15 minutes.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1337-1339
• /
• 2001

We have investigated the relation between the molecular weight distribution (MWD) of diffusible species and the recovery rate of hydrophobicity of room-temperature vulcanizing (RTV) silicone rubber (SIR) using solvent extraction at various temperatures. It was observed that the extract had a MWD ranging from a few hundreds g/mol to hundreds of thousands g/mol. By measuring the migration of siloxane to the extracted SIR surface through a thin carbon coating, the aspect of migration of diffusible species was observed as a real time plot, and the time constant of the migration was also calculated. According to the time dependence of IR-absorbance, the time constant was increased with the increase of MW of the extracts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.522-526
• /
• 2015

Generally, underwater unmanned vehicle have adopted an inertial navigation system (INS), dead reckoning (DR), acoustic navigation and geophysical navigation techniques as the navigation method because GPS does not work in deep underwater environment. Even if the tactical inertial sensor can provide very detail measurement during long operation time, it is not suitable to use the tactical inertial sensor for small size and low cost UUV because the tactical inertial sensor is expensive and large. One alternative to INS is attitude heading reference system (AHRS) with the micro-machined electro mechanical system (MEMS) inertial sensor because of MEMS inertial sensor's small size and low power requirement. A cost effective and small size attitude heading reference system (AHRS) which incorporates measurements from 3-axis micro-machined electro mechanical system (MEMS) gyroscopes, accelerometers, and 3-axis magnetometers has been developed to provide a complete attitude solution for UUV. The AHRS based MEMS overcome many problems that have inhibited the adoption of inertial system for small UUV such as cost, size and power consumption. Several evaluation experiments were carried out for the validation of the developed AHRS's function and these experiments results are presented. Experiments results prove the fact that the developed MEMS AHRS satisfied the required specification.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.241-246
• /
• 2013

This paper reports fabrication and characterization of cellulose Electro-Active Paper (EAPap) with increased thickness. Usual thickness of cellulose EAPap was $15{\mu}m$. This thickness needs to be increased to enhance the mechanical force output of EAPap. To fabricate thick cellulose EAPap, the fabrication process parameters including casting and drying processes should be investigated. In this paper, the casting thickness is increased from $800{\mu}m$ to $1500{\mu}m$, and heating times on a hot plate before and after curing process are introduced at 40 and $60^{\circ}C$ for 30 and 60 minutes, respectively. Thickness measurement, Thermal Gravitational Analysis (TGA), UV-transmittance, Young's modulus, and piezoelectric charge constant are measured. Heated EAPaps with increased thickness have similar TGA result, higher transmittance, higher Young's modulus and lower piezoelectric charge constant.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.410-414
• /
• 2013

We report the wet etching of titanium nickel (TiNi) films for the production of nano-electro-mechanical (NEM) device. $SiO_2$ and $Si_3N_4$ have been selected as sacrificial layers of TiNi metal and etched with polyethylene glycol and hydrofluoric acid (HF) mixed solution. Volume percentage of HF are varied from 10% to 35% and the etch rate of the $SiO_2$, $Si_3N_4$ and TiNi are reported here. Within the various experiment results, 15% HF mixed polyethylene glycol solution show highest etch ratio between sacrificial layer and TiNi metal. Especially $Si_3N_4$ films shows high etch ratio with TiNi films. Wet etching results are measured with SEM inspection. Therefore, this experiment provides a novel method for TiNi in the nano-electro-mechanical device.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1136-1137
• /
• 2006

통합항해시스템이라 함은 자동화된 선박의 운용에 관한 것으로, 다양한 항해 센서(GPS, Gyro, Speed Log, echo sounder)를 이용하여 선박의 항해에 필요한 각종 정보를 입수하여 최적의 항로를 설정해주고, 운항의 안정성과 효율을 극대화시키는 시스템을 지칭한다. 즉, 선박의 운항에 필요한 다수의 모듈들을 독립적으로 운용하는 것이 아니라 이를 통합된 형태로 운용하여 효율을 극대화시키는 시스템이 통합항해시스템이라 할 수 있다. 통합항해시스템은 다양한 항해 센서들과 항해 시스템으로 구성되며, 다양한 항해 데이터들은 항해 센서로부터 수신하여 처리하는 동작을 수행한다. 즉, 통합항해시스템은 다수의 센서들로부터 수신된 정보를 평가하고 잠재적 위험과 무결성 저하에 대해서는 적절한 경고를 제공하여야한다. 따라서, 항해센서 데이터의 유효성(Validity) 및 모호성(Plausibility) 검사와 무결성 감시(Integrity Monitoring)는 통합항해시스템의 필수적 기능이라 할 수 있다. 본 연구에서는 IEC 61924 규격에 의한 항해센서로부터 수신된 항해데이터가 정확하고 유효함을 가지는 지에 대한 가치평가의 척도와 독립적인 데이터 소스로부터 데이터를 비교하여 검증하는 무결성, 정확도 이내의 정보를 완전하고 명확한 방법으로 사용자에게 제공하는 무결성 감시의 방법을 제시하며, 항해센서들에 의해 취득되는 항해 데이터의 무결성 검사를 통한 유효성, 적용가능성, 무결성의 평가방법을 기술한다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.693-694
• /
• 2006

In order to develop a high temperature superconducting(HTS) coil for the fault current limiter(FCL), the over-current characteristics in YBCO coated conductor(CC) with Ni-W alloy substrate are analyzed. The HTS wire is wound by bifilar winding method for resistive current limitation and it is operated in 65K sub-cooled nitrogen. In order to analyze the resistance and the temperature characteristics of the CC wire, an analysis program is developed considering all the composition materials except the buffer layer. Using this program, the temperature rise, the resistance development and the current limitation of CC are calculated depending on the applied voltage and the stabilizer materials. According to the analysis results, under the temperature restriction of 300K, the maximum voltage per meter is determined as 40V/m if the stabilizer is $25{\mu}m$ thick stainless steel at each side. Finally, the wire length needed for the distribution level HTS FCL is estimated.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.723-724
• /
• 2006

In this study, superconducting coil arrangements and cryostat concept design were conducted for the development of 13.2kV/630A bifilar winding type high temperature superconducting(HTS) fault current limiter(FCL) with YBCO coated conductor(CC) wire. The coil consists of several layers with unique non-inductive solenoid winding method. Six types of HTS coil arrangements were investigated for the optimal insulation design of HTS FCL. And, conceptual design of cryostat was conducted for the decrement of thermal invasion and the prevention of low voltage insulation breakdown in the LHe which is used as pressurization gas in sub-cooling condition of liquid nitrogen(LN2). As the results, it was found that the modified suspended type cryostat with horizontal coil arrangement is beneficial to the insulation design of 13.2kV level bifilar winding type HTS FCL.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.533-537
• /
• 2009

This paper introduces a modified electro spinning system for biomedical wound-healing applications. The conventional electrospinning process requires a grounded electrode on which highly charged electro spun ultrafine fibers are deposited. Biomedical wound-healing membranes, however, require a very low charge and a low level of remnant solvent on the electrospun membrane, which the conventional process cannot provide. An electrohydrodynamic process complemented with field-controllable electrodes (an auxiliary electrode and guiding electrodes) and an air blowing system was used to produce a membrane, with a considerably reduced charge and low remnant solvent concentration compared to one fabricated using the conventional method. The membrane had a small average pore size (102 nm) and high porosity (85.1%) for prevention of bacterial contamination. In vivo tests on rats showed that these directly electro spun fibrous membranes produced using the modified electro spinning process supported the good healing of skin bums.