• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2918-2925
• /
• 2021

The efficiency of decontamination of model spent ion exchange resins, contaminated with magnetite and hematite, with mineral acid solutions, and using electro-decontamination, was evaluated. It has been shown that effective hematite dissolution occurs in concentrated mineral acid solutions. However, the use of direct current increases the decontamination efficiency of spent ion exchange resins contaminated with hematite. It is determined that with increasing voltage and acid concentration, the dissolution efficiency of hematite deposits increases and can exceed 99%. It has been shown that hematite dissolution is accompanied by secondary adsorption of radionuclides due to ion exchange, which can be removed with sodium nitrate solutions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1343-1346
• /
• 2008

$KSrPO_4$ and $Sr_3(Al_2O_5)Cl_2$ phosphors doped with $Eu^{2+}$ emit a blue and orange-yellow luminescence under ultraviolet (UV) excitation at ~ 400 nm, respectivel, which can be used for making white light emitting diodes.

• 대한화학회지
• /
• 제55권6호
• /
• pp.1000-1006
• /
• 2011

A systematic study of Knoevenagel reaction and Nazarov cyclization was made on variety of less reactive carbonyl compounds such as ${\beta}$-ketoesters, 1,3-diketones and cyclic active methylene compounds using $Yb(OTf)_3$ as the catalyst. Recycling study confirms reusability of the catalyst without much loss of activity.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.21-26
• /
• 2015

In this study, the control of microstructure for increasing surface roughness of Al with an electro-chemical reaction and a post treatment is systematically investigated. The Al specimen is electro-chemically treated in an electrolyte. In condition of the post treatment at $100^{\circ}C$ for 10 min, a change of the surface microstructure occur at 50V (5 min), and a oxidized layer is at 400V, to which lead a decreasing surface roughness. The minimum temperature of the post treatment for a change of microstructure is $80^{\circ}C$. Moreover, in the condition of 300V (5 min), the electro-chemical reaction is followed by the post treatment at $100^{\circ}C$, the critical enduring time for the change of microstructure is 3 min. The longer post treatment time leads to the rougher surface. The treated Al specimen demonstrate better heat release ability owing to the higher surface roughness than the non-treated Al.

• 공업화학
• /
• 제30권2호
• /
• pp.205-211
• /
• 2019

지난 수십 년 동안 고분자 분산형 액정(polymer dispersed liquid crystal, PDLC)은 전기광학적으로 전환이 가능한 특성으로 인해 빛의 투과도를 자유롭게 조절할 수 있는 smart window를 개발하는 물질로서 주목을 받아왔다. 본 연구에서는 높은 구동전압과 낮은 명암비 등의 PDLC 문제점을 해결하기 위해 아크릴계 단량체 2-hydroxyethyl acrylate (2-HEA)와 ethylene glycol phenyl ether acrylate (EGPA)의 조성이 PDLC의 전기광학 특성에 미치는 영향을 평가하였다. 상온에서 10 cps 이하의 낮은 점도를 나타내는 2-HEA와 EGPA 단량체를 사용하여 제조하는 경우 보다 쉽게 capillary action에 의해서 indium tin oxide (ITO) glass 사이에 주입하는 공정이 가능하였다. Phenyl group를 포함한 EGPA 단량체가 대부분으로 이루어진 1 : 9인 단량체 혼합물로 만들어진 PDLC cell의 경우 전기장을 인가하지 않은 경우에도 불투명한 상태가 관측되지 않았고 인가 전압에 따라 매우 불안정한 투과율을 나타내었다. Cell gap thickness가 증가함에 따라 문턱전압(threshold voltage, $V_{th}$)과 포화전압(saturation voltage, $V_{sat}$)도 증가하는 경향을 나타내었으며, $20{\mu}m$의 cell gap thickness를 갖는 PDLC cell이 10과 $40{\mu}m$의 경우 보다 상대적으로 높은 명암비를 나타내었다. 특히, 7 : 3 비율의 2-HEA : EGPA 단량체 혼합물을 사용하여 제조된 PDLC cell의 경우가 낮은 구동전압과 높은 명암비의 가장 우수한 전기광학적 특성을 나타내었다.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.524-529
• /
• 2006

New, thermally robust, arylenevinylene conjugated polymers, including poly(9,9-dioctylfluorenyl-2,7-vinylene) [poly(FV)] and poly[2-(3'-dimethyldodecylsilylphenyl)-1,4-phenylenevinylene] [poly(m-SiPhPV)], were synthesized and used for the fabrication of efficient photovoltaic cells. Bulk heterojunction photovoltaic cells fabricated by blending one of the polymers, [poly(FV)], [poly(m-SiPhPV)], and poly(FV-co-m-SiPhPV), with the fullerene derivative [6,6]-phenyl-$C_{61}$-butyric acid methyl ester (PCBM) were found to have a power conversion efficiency of up to 0.038%..

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.679-682
• /
• 2009

Utilizing a planar five coordinating N3S2 ligand, 2,6-bis(2-methylthiophenyliminomethyl)pyridine, a pseudo 7-coordinated manganese(II) complex with two labile triflate anions in the axial positions was synthesized. The reaction of the manganese(II) complex with an oxidant, iodosylbenzene, produced a metastable high-valent manganese(IV)-oxo species at 0 ${^{\circ}C}$. The high-valent Mn(IV)-oxo intermediate was characterized with a UV-vis spectrophotometer and an electrospray ionization mass spectroscopy. Reactivity studies of the Mn(IV)=O species revealed that the intermediate is capable of oxygenating $PPh_3$ and N-dealkylating N,N-dimethyl-toludine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1583-1586
• /
• 2006

All non-dopant white organic light-emitting diodes (WOLEDs) have been realized by using solid state highly fluorescent red bis(4-(N-(1- naphthyl)phenylamino)phenyl)fumaronitrile (NPAFN) and amorphous bipolar blue light-emitting 2-(4- diphenylamino)phenyl-5-(4-triphenylsilyl)phenyl- 1,3,4-oxadiazole (TPAOXD), together with well known green fluorophore tris(8- hydroxyquinolinato)aluminum $(Alq_3)$. The fabrication of multilayer WOLEDs did not involve the hard-tocontrol doping process. Two WOLEDs, Device I and II, different in layer thickness of $Alq_3$, 30 and 15 nm, respectively, emitted strong electroluminescence (EL) as intense as $25,000\;cd/m^2$. For practical solid state lighting application, EL intensity exceeding $1,000\;cd/m^2$ was achieved at current density of $18-19\;mA/cm^2$ or driving voltage of 6.5-8 V and the devices exhibited external quantum efficiency $({\eta}_{ext})$ of $2.6{\sim}2.9%$ corresponding to power efficiency $({\eta}_P)$ of $2.1{\sim}2.3\;lm/W$ at the required brightness.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.99-105
• /
• 2006

Polyamine dendrimers functionalized with electrochemiluminescent (ECL) polypyridyl Ru(II) complexes, dend-$[CO-(CH_2)_3-mbpy{\cdot}Ru(L)_2]_3(PF_6)_6$ (dend: N$(CH_2CH_2NH)_3$-, L: bpy, o-phen, phen-Cl, DTDP), were synthesized through the complexation of dendritic polypyridyl ligands to Ru(II) complexes. Their electrochemical redox potentials, photoluminescence (PL), and relative ECL intensities were studied. The ECL emissions produced by the reaction between the electro-oxidized $Ru^{3+}$ species of polyamine dendrimers and tripropylamine as a coreactant were measured in a static system with potential cycles between 0.8 and 1.3 V or through flow injection analysis with a potential of +1.3 V, and were compared to that of $[Ru(o-phen)_3](PF_6)_2{\cdot}Dend-[CO-(CH_2)_3-mbpy{\cdot}Ru(bpy)_2]_3(PF_6)_6$ showed an ECL intensity that was two-fold greater than that of the reference complex $[Ru(o-phen)_3](PF_6)_2$.

• Advances in nano research
• /
• 제17권4호
• /
• pp.385-399
• /
• 2024

NEMS (Nano-Electro-Mechanical Systems) devices play a significant role in the advancement of prosthetic hands due to their unique properties at the nanoscale. Their integration enhances the functionality, sensitivity, and performance of prosthetic limbs. Understanding the electro-thermal buckling behavior of such structures is crucial since they may be subjected to extreme heat. So, in this paper, the two-dimensional hyperbolic differential quadrature method (2D-HDQM) integrated with a four-variable refined quasi-3D tangential shear deformation theory (RQ-3DTSDT) in view of the trace of thickness stretching is extended to study electro-thermal buckling response of three-directional poroelastic FG (3D-PFG) circular sector nanoplate patched with piezoelectric layer. Aimed at discovering the real governing equations, coupled equations with the aid of compatibility conditions are employed. Regarding modeling the size-impacts, nonlocal refined logarithmic strain gradient theory (NRLSGT) with two variables called nonlocal and length scale factors is examined. Numerical experimentation and comparison are used to indicate the precision and proficiency related to the created procedure. After obtaining the outputs of the mathematics, an appropriate dataset is used for testing, training and validating of the artificial intelligence. In the results section will be discussed the trace associated with multiple geometrical and physical factors on the electro-thermal buckling performance of the current nanostructure. These findings are essential for the design and optimization of NEMS applications in various fields, including sensing, actuation, and electronics, where thermal stability is paramount. The study's insights contribute to the development of more reliable and efficient NEMS devices, ensuring their robust performance under varying thermal conditions.