• 동력기계공학회지
• /
• 제12권5호
• /
• pp.65-70
• /
• 2008

The purpose of this study is to verify availability of the acoustic emission in-situ monitoring method to the internal leak and operating conditions of the turbine major valves relating to safety for turbine operating and prevention of turbine trouble at nuclear power plants. In this study, acoustic emission tests are performed when the pressurized electro-hydraulic control oil flowed through turbine electro-hydraulic controller oil check valve and turbine power/trip fluid solenoid valve in the condition of actual turbine operating. The acoustic emission method was applied to the valves at the site, and the background noise was measured far the abnormal plant condition. To judge for the leak existence ell the object valves, voltage analysis and frequency analysis of acoustic signal emitted from infernal leak in the valve operating condition are performed. It was conformed that acoustic emission method could monitor for valve internal leak to high sensitivity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.69-72
• /
• 2008

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.770-774
• /
• 1994

The volume of an acoustic source is important in determining various acoustic parameters. One of the suggested techniques is the internal pressure method incorporating a loudspeaker attached to a chamber wall and a microphone inserted into the cavity. Although the method is easy to handle with a very simple measurement setup, the coupling effects between the dynamic system of the loudspeaker and acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field should be considered for precise result. In this study, higher order modes due to the discontinuities of loudspeaker and microphone boundaries are included and the electro-acoustic coupling effects are compensated for by using the results of two cylinders with different lengths. The volume velocity of a loudspeaker thus obtained agrees very with that measured by laser sensor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.522-526
• /
• 2015

Generally, underwater unmanned vehicle have adopted an inertial navigation system (INS), dead reckoning (DR), acoustic navigation and geophysical navigation techniques as the navigation method because GPS does not work in deep underwater environment. Even if the tactical inertial sensor can provide very detail measurement during long operation time, it is not suitable to use the tactical inertial sensor for small size and low cost UUV because the tactical inertial sensor is expensive and large. One alternative to INS is attitude heading reference system (AHRS) with the micro-machined electro mechanical system (MEMS) inertial sensor because of MEMS inertial sensor's small size and low power requirement. A cost effective and small size attitude heading reference system (AHRS) which incorporates measurements from 3-axis micro-machined electro mechanical system (MEMS) gyroscopes, accelerometers, and 3-axis magnetometers has been developed to provide a complete attitude solution for UUV. The AHRS based MEMS overcome many problems that have inhibited the adoption of inertial system for small UUV such as cost, size and power consumption. Several evaluation experiments were carried out for the validation of the developed AHRS's function and these experiments results are presented. Experiments results prove the fact that the developed MEMS AHRS satisfied the required specification.

• 한국컴퓨터정보학회논문지
• /
• 제12권3호
• /
• pp.259-266
• /
• 2007

소형 마이크로폰의 성능을 평가하는 기준으로 사용되는 전기 음향 특성 파라메타들로는 감도, 왜곡, 주파수 응답특성, 그리고 지향성이 있다. 이와 같은 특성 파라메타들은 소형 마이크로폰의 사용 목적에 따라 다르게 설계되어야하므로, 음향특성들을 정확하게 측정하여 소형 마이크로폰이 사용 목적에 적합하게 만들어 졌는지를 측정하여 확인하여야 한다. 따라서, 본 논문에서는 DSP를 이용하여 소형 마이크로폰의 음향특성 파라메타들을 동시에 측정할 수 있고, 또한 실시간에 측정할 수 있는 시스템을 구현하였다. 구현한 측정 시스템을 검증하기 위하여 네 종류의 마이크로폰의 음향특성들을 측정하고, 각 마이크로폰이 갖고 있던 음향특성 데이터 값들과 비교한 결과, 측정 환경이 동일하지 않아 비교 값들 간에 약간의 오차가 있었지만, 그 오차 값들이 허용오차의 범위 내에 분포하고 있음을 확인하였으므로 구현된 시스템이 기존의 소형 마이크로폰 음향특성 측정 장비를 대체하여 사용할 수 있음을 입증하였다.

• 한국음향학회지
• /
• 제38권5호
• /
• pp.558-567
• /
• 2019

스피치, 국악, 뮤지컬, 대중음악과 콘서트까지 다양한 장르의 공연이 이루어지는 방송용 다목적 홀의 경우 공연에 필요한 전기, 건축 음향적 요구 조건이 다양하다. 하지만 실제 음향 환경 가변을 위한 효율적인 운용 방법은 많지 않다. 본 연구는 무대 반사판의 설치 유 무와 전기 음향 사용 조건하에서 배너의 가변에 따른 홀의 음향 환경 변화를 살펴보았다. 그 결과 벽체 면적의 15 %에 해당하는 배너를 설치한 실제 측정에서 잔향 시간(Reverberation Time, $T_{30}$)은 최대 0.12 s, 초기감쇠시간(Early Decay Time, EDT)은 0.15 s, 음악 명료도(Clarity, $C_{80}$)는 0.76 dB, 음성 명료도(Definition, $D_{50}$)는 6.43 % 변하였다. 배너의 면적을 확장시킨 컴퓨터 시뮬레이션을 통해 전체 벽체 면적의 40 %에 해당하는 배너를 설치할 경우 잔향 시간은 0.11 s에서 최대 0.55 s까지 가변되는 것을 확인했다.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.528-535
• /
• 2004

Ultrasonic Vibrator is designed to achieve the maximum vibration amplitude at 30 kHz by in-cluding a horn (diameter, 40 mm), mechanical vibration amplifier at the top of the ultrasonic vibrator in the system and making the complete system resonate. In addition, it is experimentally visualized by particle imaging velocimetry (PIV) that the acoustic streaming velocity in the gap is at maximum when the gap between the ultrasonic vibrator and stationary plate agrees with the multiples of half-wavelength of the ultrasonic wave. This fact results from the resonance of the sound wave and the theoretical analysis of that is also accomplished and verified by experiment. It is observed that the magnitude of the acoustic streaming dependent upon the gap between the ultrasonic vibrator and stationary plate possibly changes due to the measurement of the average velocity fields of the acoustic streaming induced by the ultrasonic vibration at resonance and non-resonance. There exists extremely small average velocity at non-resonant gaps while the relatively large average velocity exists at resonant gaps compared with non-resonant gaps. It also reveals that there should be larger axial turbulent intensity at the hub region of the vibrator and at the edge of it in the resonant gap where the air streaming velocity is maximized and the flow phenomena is conspicuous than that at the other region. Because the variation of the acoustic streaming velocity at resonant gap is more distinctive than that at non-resonant gap, shear stress increases more in the resonant gap and is also maximized at the center region of the vibrator except the local position of center (r〓0). At the non-resonant gap there should be low values of vorticity distribution, but in contrast to the non-resonant gap, high and negative values of it exist at the center region of the vibrator with respect to the radial direction and in the vicinity of the middle region with respect to the axial direction. Acoustic streaming is noise-free due to the ultrasonic vibration and maintenance-free because of the absence of moving parts. Moreover, the proposed method by acoustic streaming can be utilized to the nano and micro-electro mechanical systems as a driving mechanism in addition to the augmentation of the streaming velocity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.329-330
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1992-1993
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 지구물리와물리탐사
• /
• 제10권3호
• /
• pp.203-210
• /
• 2007

자연전위 측정에 의한 산사태나 사면 안정성 모니터링의 기본 연구로 일축 압축에 의한 암석의 파괴 시 수반되는 미소 전위를 측정하였다. 측정시스템은 24 bit의 분해능을 가지며 동시에 8채널 측정이 가능한 A/D 변환기와 일축 압축 시험기, 일축 압축 시 암석의 변형률 측정 장치, 4조의 전위 전극으로 구성된다. 구축된 시스템을 이용하여 화강암, 석회암, 사암의 암석시료와 균질한 시료 상태에서 미소 전위 발생을 모니터링하기 위해 제작한 모르타르 시료에 대하여 실험하였다. 포화된 암석 시료에서는 압력이 가해짐에 따라 모든 시료에서 미소 전위의 발생이 관측되었으며, 하중이 증가함에 따라 발생되는 전위의 세기가 증가하는 것을 확인하였다. 발생 전위의 세기는 사암, 석회암, 화강암의 순으로 크게 나타났는데, 이는 공극률과 비례관계가 있음을 알 수 있었고, 전기동역학적인 관점에서 발생 메커니즘을 설명할 수 있다. 반면, 건조 시료에서는 사암에서만 전위 발생이 관측되었는데 이는 사암에 석영 함량이 많아 발생한 압전 전위에 의한 것으로 이론을 통해 알 수 있었다. 시료에 부착된 4조의 전위전극에서의 측정된 전위세기를 비교한 결과 파괴면에 인접한 전극에서의 전위세기가 다른 전극에 비해 크게 나타나는 것을 확인했다. 이는 다채널 SP 모니터링을 통해 산사태나 사면 붕괴 지점을 미리 예측할 수 있는 긍정적인 결과로서 향후 음향방사(acoustic emission)와 동시에 측정하여 정확한 파괴면과 미소 전위세기와의 정량적 상관관계를 규명할 예정이다.