• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.184-185
• /
• 2011

In this study, in order to obtain a high reflectivity for the LED lead frame, tin dip coating and tin plating were conducted respectively, and wettability of LED lead frame with tin solder also was tested by wetting balance tester. A Cu sheet was plated in Cu brighten electroplating bath and followed by immersion in a Sn electro-less plating bath [1]. On the other hand, in the dip coating process, a Cu sheet was dipped into molten tin. In the progress of wetting test, besides wetting balance curve, the maximum measured force($F_m$), the maximum withdrawal force($F_w$) and zero-cross time($t_0$) were obtained in various temperatures. With the maximum withdrawal force, the surface tension was calculated at different temperatures. The Cu sheet plated with bright Cu and Sn show a silver bright property while that of Cu dipped with Sn possessed a high reflectance density of 1.34GAM at $270^{\circ}C$.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.373-379
• /
• 2017

Dry processes like evaporation and sputtering in vacuum chamber are difficult to make a uniform, large area and high quality film on thin PET substrate because of PET degradation and bad adhesion. On the other hand, wet processes like electro or electroless plating have complex processes and require high environmental cost. In this study, we successfully prepared $2{\mu}m$ Zn/Cu/Ni multilayers coated on $12{\mu}m$ polyethylene terephthalate (PET) substrate by using dry-wet mixing processes. Their surface electric resistances were evaluated around $0.2{\Omega}$ by using 4 probe measurements. Furthermore, their corrosion resistance also evaluated by natural potential test and compared with other wet, dry and mixing process samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.125-126
• /
• 2005

Recently semiconductor devices are required more smaller scale and more powerful performance. For smaller scale of device, multilayer structure is proposed. And, for the higher performance, interconnection material is change to copper, because copper has high EM(Electro-migration)and low resistivity. Then copper CMP process is a great role in a multilayer formation of semiconductor. Copper process is different from aluminum process. ECP process is one of the copper processes. In this paper, we focused on the defects tendency by copper thickness which filled using ECP process. we observed hump high and dishing. Conclusively, hump hight reduced at copper thickness increased Also dishing reduced.

• 한국표면공학회지
• /
• 제16권3호
• /
• pp.98-107
• /
• 1983

A study on the improvement of wear resistance of brasses by electroplating and diffusion treatment of tin was carried out. The optimum condition of the treatment obtained was as follows. Plating thickness of tin : 5 - 9 $\mu\textrm{m}$ Condition of diffusion treatment : atmosphere ; fused nitrate bath (KNO3 + NaNO3) temperature and time ; 1st step 320$^{\circ}C$, 60min. and 450$^{\circ}C$, 30min. During the diffusion treatment, internetallic compounds of Cu-Sn were formed and these compounds were identified as η, $\varepsilon$ and $\delta$ phase from the outer tin layer. It was considered that the improvement of wear resistance of brasses by the treatment is because of the formation of intemetallic compounds particalarly $\varepsilon$phase which is very hard, between soft tin layer brass.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1718-1723
• /
• 2007

The Probe Card is a test component which is to classify the good semiconductor chips before the packaging. The yield of semiconductor product can be better from analysis of probe test information. Recently the technology of the probe card needs narrow width and large amount of probe tip. In this research, the probe tip based on the MEMS(micro electro mechanical system) technology was designed and fabricated to improve the reliability of the test and to meet 2-dimensional Array of tip. The mechanical and electrical properties of proposed tip were evaluated and it has over 100,000 of repetition times in the condition of 5gf, $20{\mu}m$ Over Drive.

• 센서학회지
• /
• 제15권5호
• /
• pp.352-356
• /
• 2006

In this paper, we developed enzyme electrode of a new form to improve performance of disposable glucose sensor. We could fabricate electrode of Cu/Ni/Au structure which has very low electrical resistance (0.1 $\Omega$) by sticking copper film to plastic film with laminating method and electro-plated nickle and gold on it. The enzyme electrode was completed by immobilizing enzyme on the fabricated electrode. The fabricated glucose sensor has very quick sensing time as 3 seconds, and excellent reproducibility, fabrication yield as well.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.287-287
• /
• 2012

주석합금도금 피막은 약한 전류가 흐르는 전자제품, 휴대전화, 자동차 공업용, 장식용으로 사용되고 있다. 현재까지 공업적으로 사용되고 있는 주석합금도금의 합금원소로서 은, 코발트, 니켈 등의 높은 가격의 금속과 납과 같이 ELV 및 RoHS 유해환경물질규제지침에 따라 수출제한을 받는 6가 크롬, 카드뮴 등이 알려져 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.414.1-414.1
• /
• 2016

스크린 프린팅법을 이용한 태양전지의 전극은 주로 고가의 은을 사용하기에 태양전지의 저가화에 한계를 가지고 있다. 고효율 결정질 실리콘 태양전지의 원가절감의 문제 해결방안으로 박형 웨이퍼 연구개발이 많은 관심을 받고 있다. 본 연구에서는 은 전극을 대체 할 수 있는 니켈/구리 전극을 사용하였고, 박형 웨이퍼에서도 전극 공정이 가능한 도금법을 사용하여 전극을 형성 하였다. 니켈 전극형성은 광유도 도금법(Light-Induced Plating), 구리 전극형성은 광유도전해도금법(Light-Induced Electro Plating)을 이용하여 실험을 진행 하였다. 니켈 광유도 도금 공정시 공정시간 3 ~ 9분까지 가변하였다. 니켈실리사이드 형성 위해 열처리 공정을 $300{\sim}450^{\circ}C$까지 가변하였고 유지시간 30초 ~ 3분까지 가변하여 실험을 진행하였다. 니켈 도금 수용액의 pH 6 ~ 7.5까지 가변하여 실험하였다. 구리 광유도 전해도금 공정 전류밀도를 $1.6mA/cm^2{\sim}6.4mA/cm^2$까지 가변하여 실험을 진행 후, 전류밀도 $3.2mA/cm^2$로 시간 5 ~ 7분까지 가변하여 실험 하였다. 니켈 도금 공정 시간 5분, 니켈실리사이드 형성 열처리 온도 $350^{\circ}C$, 유지시간 1분에서 DIV(Dark I-V) 분석결과 가장 적은 누설전류를 확인하였다. 니켈 도금액 pH 6.5에서 니켈입자 및 구리입자의 균일성이 좋은 최적의 조건임을 확인하였다. 구리 도금 공정 전류밀도 $3.2mA/cm^2$, 시간 5분에서 TLM(Transmission Line Method) 측정결과 접촉 저항 $0.39{\Omega}$과 접촉 비저항 $12.3{\mu}{\Omega}{\cdot}cm^2$의 저항을 확인하였다. 도금법을 이용하여 전극을 형성함으로써 접촉저항 및 접촉 비저항이 낮고 전극 품질이 향상됨으로서 셀의 전류밀도 $42.49mA/cm^2$를 얻을 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.386.1-386.1
• /
• 2014

The ionic polymer-metal composite (IPMC), a type of electro-active polymer material, has received enormous interest in various fields such as robotics, medical sensors, artificial muscles because it has many advantages of flexibility, light weight, high displacement, and low voltage activation, compare to traditional mechanical actuators. Mostly noble metal materials such as gold or platinum were used to form the electrode of an IPMC by using electroless plating process. Furthermore, carbon-based materials, which are carbon nanotube (CNT) and reduced graphene-CNT composite, were used to alter the electrode of IPMC. To form the electrode of IPMC, we employ the synthesized graphene on copper foil by chemical vapor deposition method and use the transfer process by using a support of PET/silicone film. The properties of graphene were evaluated by Raman spectroscopy, UV/Vis spectroscopy, and 4-point probe. The structure and surface of IPMC were analyzed via field emission scanning electron microscope. The fabricated IPMC performance such as displacement and operating frequency was measured in underwater.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2248-2250
• /
• 2000

We investigated properties of PZT composite for medical ultrasonic transducer array (briefly UTA) for medicine applications fabricated by micro pressing and dicing method. Dicing method was the fabrication process of conventional ultrasonic transducer array by dicing sintered PZT sheet. Micro pressing method was the proposed process using pressing PZT green sheet by PMMA micro mold from LIGA process. Microstructures, electrical and electro -mechanical properties of fabricated UTAs of two cases were analyzed. Thickness mode electro-mechanical coupling coefficient of two cases have same values of 51%. Sintered PZT Microstructures of them showed dense and uniform. Micro pressing method was very mass productive process because of using batch type LIGA process. From results, we found micro pressing method was more competitive than dicing method for UTA fabrication. For further study, uniformity of microstructures and electro-mechanical properties of large scale, and fabrication processes of Ni plating and PMMA molding should be improved and investigated.