• 제목/요약/키워드: Electro activity

Search Result 155, Processing Time 0.025 seconds

A Study on the Electrochemical Characteristics of Biosensor with HRP Enzyme Immobilized on SPCE (SPCE에 HRP 효소가 고정화된 바이오센서의 전기화학적 특성에 관한 연구)

  • Han, Kyoung Ho;Lee, Dae Hyun;Yoon, Do Young;Choi, Sangil
    • Journal of the Korean Electrochemical Society
    • /
    • v.23 no.3
    • /
    • pp.73-80
    • /
    • 2020
  • Fenton oxidation method using hydrogen peroxide is an eco-friendly oxidation method used in water treatment and soil restoration. When removing pollutants by this method, it is quite important to properly regulate the concentration of hydrogen peroxide according to the concentration of the contaminants. In this study, electrochemical biosensors using HRP (horseradish peroxidase) enzymes were manufactured and studies were conducted on the activity of enzymes and the detection characteristics of hydrogen peroxide. HRP were electro deposited with chitosan and AuNP on the working electrode surface of the SPCE (Screen Printed Carbon Electrode). Then, the fixation of enzymes was confirmed using the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The activity of HRP enzymes was also identified from chronoamperometry (CA) and UV spectroscopy. After immersing the biosensor in PBS solution the current generated from electrodes by titrating hydrogen peroxide was measured from CA analysis. The generated current increased linearly for the concentration of hydrogen peroxide, and a calibration curve was derived that could predict the concentration of hydrogen peroxide from the current.

Implementation of the Wearable Sensor Glove Using EDA Sensor and Conducting Fabric

  • Lee, Young-Bum;Lee, Byung-Woo;Choo, Young-Min;Kim, Jin-Kwon;Jung, Wan-Jin;Kang, Dae-Hoon;Lee, Myoung-Ho
    • Journal of Biomedical Engineering Research
    • /
    • v.28 no.2
    • /
    • pp.280-286
    • /
    • 2007
  • The wearable sensor glove was developed using EDA sensors and conducting fabric. EDA(Electro-dermal Activity) signal is an electric response of human skin. There are SIL(Skin Impedance Level) and SIR(Skin Impedance Response) in EDA. SIL consists mostly of a DC component while SIR consists of an AC component. The relationship between drowsiness and the EDA signal is utilized. EDA sensors were made using a conducting fabric instead of AgCl electrodes, for a more suitable, more wearable device. The EDA signal acquisition module was made by connecting the EDA sensor gloves through conductive fabric lines. Also, the EDA signal acquisition module can be connected to a PC that shows the results of the EDA signal processing analysis and gives proper feedback to the user. This system can be used in various applications to detect drowsiness and prevent accidents from drowsiness for automobile drivers.

Visualization of oxygen distribution on leaf surfaces using VisiSens oxygen planar optode system (VisiSens 산소 평면광 센서 시스템을 이용한 식물 잎 표면의 산소분포 가시화)

  • Hwang, BaeGeun;Kim, HyeJeong;Lee, SangJoon
    • Journal of the Korean Society of Visualization
    • /
    • v.14 no.1
    • /
    • pp.51-56
    • /
    • 2016
  • Oxygen is a key factor in aerobic reactions and most biological activities. Visualization of oxygen distribution of a chemical process or biological system has been a very challenging object despite of its significance and potential impact. To monitor and visualize the spatial distribution of oxygen concentration, various techniques such as electro-chemical probe, polarographic electrode, LIF(laser-induced fluorescence) and so on have been introduced. Oxygen planar optode which utilizes the oxygen quenching of fluorescence light is one of the currently available methods for time-resolved visualization of oxygen distribution on a planar surface. In this study, we utilized VisiSens oxygen planar optode system to visualize the spatial distribution of oxygen concentration on leaves of Korean azalea. As a result, temporal variation of oxygen concentration distribution caused by respiratory activity of the leaf could be quantitatively monitored.

Preparation of Pt/C catalyst for PEM fuel cells using polyol process (Polyol Process를 통한 PEM Fuel Cell용 Pt/C촉매 제조)

  • Oh, Hyoung-Seok;Kim, Han-Sung
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.11a
    • /
    • pp.443-446
    • /
    • 2006
  • Carbon-supported Platinum (Pt) is the potential electro-catalyst material for anodic and cathodic reactions in fuel cell. Catalytic activity of the metal strongly depends on the particle shape, size and distribution of the metal in the porous supportive network. Conventional preparation techniques based on wet impregnation and chemical reduction of the metal precursors often do not provide adequate control of particle size and shape. We have proposed a novel route for preparing nano sized Pt colloidal particles in solution by oxidation of ethylene glycol. These Pt nano particles were deposited on large surface area carbon support. The process of nano Pt colloid formation involves the oxidation of solvent ethylene glycol to mainly glycolic acid and the presence of its anion glycolate depends on the solution pH. In the process of colloidal Pt formation glycolate actsas stabilizer for the Pt colloidal particle and prevents the agglomeration of colloidal Pt particles. These mono disperse Pt particles in carbon support are found uniformly distributed in nearly spherical shape and the size distribution was narrow for both supported and unsupported metals. The average diameter of the Pt nano particle was controlled in the range off to 3 nm by optimizing reaction parameters. Transmission electron microscopy, CV and RRDE experiments were used to compliment the results.

  • PDF

Characterization of CNT/TiO2 Electrode Prepared Through Impregnation with TNB and Their Photoelectrocatalytic Properties

  • Zhang, Feng-Jun;Chen, Ming-Liang;Oh, Won-Chun
    • Environmental Engineering Research
    • /
    • v.14 no.1
    • /
    • pp.32-40
    • /
    • 2009
  • In this study, we have prepared three kinds of carbon nanometer tube $CNT/TiO_{2}$ electrodes through impregnation with different concentration titanium n-butoxide (TNB) solution. The prepared electrodes were characterized with surface properties, structural crystallinity, elemental identification and photoelectrocatalytic activity. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine CNT. This indicated the blocking of micropores on the surface of CNT, which was further supported by observation via SEM. XRD results showed patterns for the composites and a typical single and clear anatase crystal structure. The main elements such as C, O and Ti were existed for all samples from the EDX data. The catalytic efficiency of the developed electrode was evaluated by the photoelectrodegradation of methylene blue (MB). The positive potential applied in photoelectrocatalytic (PEC) oxidation was studied. It was found that photoelectrocatalytic (PEC) decomposition of MB solution could be attributed to combination effects between $TiO_2$ photocatalytic and CNT electro-assisted. Through the comparison between photocatalytic (PC) oxidation and photoelectrocatalytic (PEC) oxidation, it was found that the PEC oxidation efficiency for MB is higher than that of PC oxidation.

Chemical Composition and Seasonal Variation of Acid Deposition in Chiang Mai, Thailand

  • Sillapapiromsuk, S.;Chantara, S.
    • Environmental Engineering Research
    • /
    • v.15 no.2
    • /
    • pp.93-98
    • /
    • 2010
  • This study aims to determine the chemical composition and seasonal variation of atmospheric acid deposition in order to identify possible sources contributing to precipitation. Sampling and analysis of 132 wet deposition samples were carried out from January to December 2008 at Mae Hia Research Center, Chiang Mai University, Chiang Mai Province. Total precipitation was 1,286.7 mm. Mean electro-conductivity and pH values were 0.94 mS/m and 6.27, respectively. Major cations ($Na^+$, ${NH_4}^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) and major anions ($HCOO^-$, $CH_3COO^-$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were determined by Ion Chromatography. The relative volume weight mean concentrations of anions, in descending order, were ${SO_4}^{2-}$ > ${NO_3}^-$ > $Cl^-$ > $CH_3COO^-$ > $HCOO^-$ and those of cations were $NH_4^+$ > $Ca^{2+}$ > $Mg^{2+}$ > $K^{+}$ > $Na^+$. Results of a principle component analysis highlighted the influence of various possible sources of ions such as agricultural activity, fuel combustion, marine sources, soil resuspension, and biomass burning.

A Simple and Rapid Method to Isolate Low Molecular Weight Proteinase Inhibitors from Soybean

  • Krishnan Bari B.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.49 no.4
    • /
    • pp.342-348
    • /
    • 2004
  • Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the $60\%$ isopropanol extract of soybean(Glycine max [L.] Merr.) seed revealed two abundant proteins with molecular masses of 19 and 10 kDa. Amino acid analysis revealed that the isopropanol-extractable protein fraction was rich in cysteine. Two-dimensional gel electro-phoretic analysis indicated that the 19kDa and 10kDa proteins had pI of 4.2 and 4.0 respectively. Peptide mass fingerprints of trypsin digests of the two proteins obtained using matrix-assisted, laser desorption/ionization-time of flight (MALDI-TOF) mass spectroscopy revealed the 19kDa protein was Kunitz trypsin inhibitor and the 10kDa protein was Bowman-Birk proteinase inhibitor. When resolved under non-denaturing conditions, the isopropanol-extracted proteins inhibited trypsin and chymotrypsin activity. Results presented in this study demonstrate that isopropanol extraction of soybean seed could be used as a simple and rapid method to obtain a protein fraction enriched in Kunitz trypsin and Bowman-Birk proteinase inhibitors. Since proteinase inhibitors are rich in sulfur amino acids and are putative anticarcinogens, this rapid and inexpensive isolation procedure could facilitate efforts in nutrition and cancer research.

Fundamental Investigation of Functional Property of Concrete Mixed with Functional Materials

  • Lee, Jong-Chan;Lee, Moon-Hwan;Lee, Sae-Hyun;Park, Young-Sin;Park, Jae-Myung
    • International Journal of Concrete Structures and Materials
    • /
    • v.18 no.3E
    • /
    • pp.165-171
    • /
    • 2006
  • Environment-friendly materials are increasingly used as building construction materials nowadays, and the market share of those is growing. Accordingly, the research and developments in terms of environmental value are progressing steadily now. The main characteristics of environmental products are far-infrared radiation, negative-ion emission, electromagnetic wave shielding, and antimicrobial property. These products are often used in mortar and as spray on the finishing material. Nevertheless, there are hardly any research on the functional properties of concrete, the main material in construction field. Thus, we evaluated such basic properties of concrete as slump, compressive strength and air content while using such functional materials as sericite, wood-pattern sandstone, carbon black and nano-metric silver solution to focus on their functional properties like far-infrared radiation, negative ion emission, electro magnetic wave shielding, and antimicrobial activity in this research. The results indicated that the most useful material in the functional materials was carbon black. Sericite and nano-metric silver solution had a little effect on the functional property. Moreover, although wood-pattern sandstone had very high functional property, it exhibited too low compressive strength to be applied, to concrete as a factory product. Antimicrobial property of nano-metric silver solution in the concrete was not clear demonstrated, but if these specimens were to be aged in $CO_2$ gas for a long time, it might be apparent.

Electro-chemical Preparation of TiO2/CNT Electrodes with TNB Electrolyte and Their Photoelectrocatalytic Effect

  • Zhang, Feng-Jun;Chen, Ming-Liang;Oh, Won-Chun
    • Journal of the Korean Ceramic Society
    • /
    • v.46 no.6
    • /
    • pp.554-560
    • /
    • 2009
  • We investigate a method for the electrochemical preparation of titanium dioxide/carbon nanotube ($TiO_2$/CNT) composites involving the electroplating of Ti in a titanium n-butoxide (TNB) electrolyte into a CNT matrix. The Brunauer-Emmett-Teller (BET) surface areas of $TiO_2$/CNT composites decrease as the electrochemical operating time increases. Changes in XRD patterns show a typical anatase type on the $TiO_2$/CNT composite prepared with a CNT matrix by the electroplating method in a TNB solution. In SEM micrographs, the titanium complex particles are uniformly distributed on the CNT surface. The results of chemical elemental analysis for the $TiO_2$/CNT composites show that most of the spectra for these samples produce stronger peaks for carbon and Ti metal than for any other element. Finally, the prominent photoelectrocatalytic activities of the $TiO_2$/CNT composites can be attributed to the combined effects of photodegradation of $TiO_2$, electron assistance of CNT, and the application of a sufficient voltage.

Effects of a Recreation Therapy Program on Mental Health and Heart Rate Variability in Burn Rehabilitation Patients (치료레크리에이션 프로그램이 화상재활환자의 정신건강 상태와 심박동 변이에 미치는 효과)

  • Kil, Myung-Sook;Lee, Mi-Hwa;Lee, Yong-Mi
    • Journal of Korean Biological Nursing Science
    • /
    • v.17 no.2
    • /
    • pp.179-187
    • /
    • 2015
  • Purpose: This study was done to evaluate the effects of a recreation therapy program on burn rehabilitation patients to determine if the program is an effective nursing intervention which can affect mental health problems and heart rate variability. Methods: Subjects were 54 hospitalized burn rehabilitation patients (25 in the control group, 29 in the experimental group). The experimental group participated 6 times in a recreation therapy program led by a qualified instructor. Brief symptoms inventory-18 (somatization, anxiety, depression) questionnaire, and heart rate variability were checked before and after the recreation therapy program. Results: The mental health scale showed significant differences in somatization (p<.001), anxiety (p<.001) and depression (p<.001). There was no significant difference in heart rate variability (autonomic activity, autonomic balance, stress resistance, stress parameter and fatigue, mean heart rate, electro-cardiac stability). Conclusion: The findings from this study suggest that a recreation therapy program is an effective nursing intervention to decrease the level of mental health problems of burn rehabilitation patients. However, a subsequent study is needed to develop an intervention program that will induce the effect of physiological parameters like heart rate variability (HRV).