• ETRI Journal
• /
• 제30권6호
• /
• pp.844-849
• /
• 2008

A new transcutaneous energy transmission (TET) system was developed for transmitting electrical power to an implanted device, such as an artificial heart in a patient's body. This new design can maintain a stable output voltage independent of the load resistance. The system includes a compensation capacitor to reduce energy loss and increase power transfer efficiency. Experimental results show that the output voltage of the receiving coil changes very little as the load resistance varies from 14.8 ${\Omega}$ to 15 $k{\Omega}$, which corresponds to a change in output power from 0.1 to 97 W.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권5호
• /
• pp.332-337
• /
• 2004

A number of techniques have been developed for estimation of speed or position in motor drives. The accuracy of these techniques is affected by the variation of motor parameters such as the stator resistance, stator inductance or torque constant. This paper is proposed a neural network based estimator for torque and stator resistance in IPMSM Drives. The neural weights are initially chosen randomly and a model reference algorithm adjusts those weights to give the optimum estimations. The neural network estimator is able to track the varying. parameters quite accurately at different speeds with consistent performance. The neural network parameter estimator has been applied to slot and flux linkage torque ripple minimization of the IPMSM. The validity of the proposed parameter estimator is confirmed by the operating characteristics controlled by neural networks control.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1903-1914
• /
• 2011

In this paper, we propose vehicle running characteristic simulator. The developed simulator is configured by two induction motors which are directly coupled with each other. One motor is to simulate the vehicle drive and another motor is to simulate the vehicle dynamic load including running resistance, gradient resistance and adhesive characteristics between rail and wheel. The running characteristics of vehicle are modeled by numerical formulas. These are programed by software of embedded controller. Thus, it is possible to change several running characteristics during the running test freely and instantly. To evaluate the feasibility of the simulator, the experiments on slip and adhesion coefficient are performed. Additionally the adhesion control and speed control of vehicle are tested with simulator. Experimental results show that the simulator can produce the driving characteristics similar to the vehicle system.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1150-1154
• /
• 2003

The voltage profile during discharge of the zinc air battery has very flat pattern until reach to end of discharge voltage. But, when zinc air battery is discharged by high current, the discharge voltage and energy becomes low. Therefore, we focused on effects of catalyst size to solve this problems by increasing active sites of oxygen reduction reaction. The size of catalyst was reduced from 27 to l${\mu}{\textrm}{m}$ and we examined average discharge voltage, capacity, energy, resistance and characteristics during GSM pulse discharge of zinc air battery with change of current density. And we also measured porosity of the cathode according to the ASTM. So we have got improvement of average discharge voltage and energy when catalyst was minimized and we have got optimum size of catalyst at 5${\mu}{\textrm}{m}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.354-354
• /
• 2010

In this study, we studied the nature of thin films formed by photodoping chalcogenide materials with for use in programmable metallization cell devices, a type of ReRAM. We investigated the resistance of Ag-doped chalcogenide thin films varied in the applied voltage bias direction from about $1\;M{\Omega}$ to several hundreds of $\Omega$. As a result of these resistance change effects, it was found that these effects agreed with PMC-RAM. The results imply that a Ag-rich phase separates owing to the reaction of Ag with free atoms from the chalcogenide materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.86-87
• /
• 2008

In this study, we studied the nature of thin films formed by photodoping chalcogenide materials with for use in programmable metallization cell devices, a type of ReRAM. We investigated the resistance of Ag-doped chalcogenide thin films varied in the applied voltage bias direction from about 1 M$\Omega$ to several hundreds of $\Omega$. As a result of these resistance change effects, it was found that these effects agreed with PMC-RAM. The results imply that a Ag-rich phase separates owing to the reaction of Ag with free atoms from the chalcogenide materials.

• 대한임상검사과학회지
• /
• 제44권3호
• /
• pp.112-117
• /
• 2012

Escherichia coli biofilm, reported to be produced in the human intestine causing a significant health risk, was successfully grown on transwell$^{(R)}$. This biofilm layer was identified by crystal violet staining and prepared for the in vitro E. coli biofilm system which can be used to screen for inhibitors. The biofilm formation did not show a change in transepithelial electrical resistance values. Furthermore, rhodamine 123 staining showed that the dye did not pass through the membrane once biofilm was formed.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.1016-1021
• /
• 1997

Magneto resistance properties in spin-valve sandwiches with various thickness of nanmagnetic layer in contact with the ferromagnetic NiFe film were investigated. The NiFe layer in contact with the NiO film was pinned by strongly exchange-biased coupling and the free NiFe layer at the film surface induced a sharp change in the magnetoresistance at -5~15Oe due to small coercivity. The NiO/NiFe/Cu/NiFe film showed a magnetoresistance ratio in the range of 2.3~2.9% and a field sensitivity above 2.2%/Oe with various of nonmagnetic layer. The NiO/NiFe/Cu/NiFe film of the field sensitivity above 2.2%/Oe suggests stang possibility of magnetic sensor matter.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.293-300
• /
• 2011

A number of techniques have been developed for estimation of speed or position in motor drives. The accuracy of these techniques is affected by the variation of motor parameters such as the stator resistance, stator inductance or torque constant. This paper is proposed a neural network based estimator for torque and stator resistance and adaptive fuzzy learning contrroller(AFLC) for speed control in IPMSM Drives. AFLC is chaged fuzzy rule base by rule base modifier for robust control of IPMSM. The neural weights are initially chosen randomly and a model reference algorithm adjusts those weights to give the optimum estimations. The neural network estimator is able to track the varying parameters quite accurately at different speeds with consistent performance. The neural network parameter estimator has been applied to slot and flux linkage torque ripple minimization of the IPMSM. The validity of the proposed parameter estimator and AFLC is confirmed by comparing to conventional algorithm.

• Composites Research
• /
• 제30권2호
• /
• pp.138-144
• /
• 2017

탄소나노튜브(CNT)를 이용하여 신율이 뛰어난 p-DCPD를 지로 사용하여 손상감지용 고분자 필름 센서를 연구하였다. CNT를 수지에 혼합시킬 경우 중합을 방해하여 1차 개환만 진행되었다. CNT 농도에 따른 정적접 촉각을 측정하여 계면의 젖음성을 측정하였다. 높은 신율을 가지는 p-DCPD에 CNT를 혼합시킴으로써 전도성을 확보하였고, CNT 농도에 따른 인장강도 및 전기저항 분산도 평가를 실시하였을 경우 0.5 wt% CNT/p-DCPD 조건이 최적의 조건임을 확인하였다. CNT/p-DCPD 센서의 내구성을 평가하기 위해 동적 피로 실험을 실시하여 인장응력에 따른 전기저항 변화를 평가하였다. 초기 3회 사이클 동안은 전기저항 변화도와 응력간의 결과가 유사한 경향을 나타내었다. CNT/p-DCPD 센서의 활용을 위해 에폭시 기지 표면에 센서를 붙이고 기지 재료의 파괴거동을 확인하였다. 기지 파괴가 발생되기 전에 CNT/p-DCPD 센서의 전기저항 점핑 신호를 관찰할 수 있었다. 이는 기지재료에 발생된 균열에 의해 CNT/p-DCPD 센서와 기지간의 접착 파괴로 발생된 신호이며, 이러한 신호를 이용하여 기지재료의 균열 및 파괴를 예측해 볼 수 있었다.