• Title/Summary/Keyword: Electrical parameter

Search Result 3,283, Processing Time 0.031 seconds

Open Circuit Fault Diagnosis Using Stator Resistance Variation for Permanent Magnet Synchronous Motor Drives

  • Park, Byoung-Gun;Kim, Rae-Young;Hyun, Dong-Seok
    • Journal of Power Electronics
    • /
    • v.13 no.6
    • /
    • pp.985-990
    • /
    • 2013
  • This paper proposes a novel fault diagnosis scheme using parameter estimation of the stator resistance, especially in the case of the open-phase faults of PMSM drives. The stator resistance of PMSMs can be estimated by the recursive least square (RLS) algorithm in real time. Fault diagnosis is achieved by analyzing the estimated stator resistance of each phase according to the fault condition. The proposed fault diagnosis scheme is implemented without any extra devices. Moreover, the estimated parameter information can be used to improve the control performance. The feasibility of the proposed fault diagnosis scheme is verified by simulation and experimental results.

Num Worker Tuner: An Automated Spawn Parameter Tuner for Multi-Processing DataLoaders

  • Synn, DoangJoo;Kim, JongKook
    • Annual Conference of KIPS
    • /
    • 2021.11a
    • /
    • pp.446-448
    • /
    • 2021
  • In training a deep learning model, it is crucial to tune various hyperparameters and gain speed and accuracy. While hyperparameters that mathematically induce convergence impact training speed, system parameters that affect host-to-device transfer are also crucial. Therefore, it is important to properly tune and select parameters that influence the data loader as a system parameter in overall time acceleration. We propose an automated framework called Num Worker Tuner (NWT) to address this problem. This method finds the appropriate number of multi-processing subprocesses through the search space and accelerates the learning through the number of subprocesses. Furthermore, this method allows memory efficiency and speed-up by tuning the system-dependent parameter, the number of multi-process spawns.

An Estimation Algorithm for the Earth Parameter and Resistivity using Artificial Neural Network (신경회로망을 이용한 대지파라미터와 대지저항률 해석 알고리즘)

  • Ryu, Bo-Hyuk;Kim, Jung-Hoon
    • Proceedings of the KIEE Conference
    • /
    • 2005.07a
    • /
    • pp.563-565
    • /
    • 2005
  • In this study, a algorithm to estimate Equivalent earth resistivity and Earth parameter using Artificial Neural Network(ANN) was proposed. Structures of the soil are grouped by using SOM algorithm before estimation. Earth parameter and Equivalent earth resistivity are obtained by using BP algorithm. The effectiveness of the proposed algorithm was verified. In the case study. afterwards, the algorithm proposed in this study will be used in more applications and gained more reliability.

  • PDF

Performance evaluation and simulations of control systems with parameter perturbation (매개변수 섭동에 대한 제어계의 성능 평가 및 시뮬레이션)

  • Yun, Kyong-Han;Lee, Jong-Gun;Hur, Myung-Joon;Kim, Young-Chol
    • Proceedings of the KIEE Conference
    • /
    • 1992.07a
    • /
    • pp.330-332
    • /
    • 1992
  • This paper tries to evaluate the control performance of systeme in cases of parameter perturbations. Six cases of the root distribution and location changes of each characteristic roots by the parameter perturbation are considered as evaluation factors. A qualitative evaluation is performed through several simulations. These results will be used as a basic data for the complete analysis of the control performance.

  • PDF

분포매개정수를 갖는 원자로의 최적제어 2

  • 지창열
    • 전기의세계
    • /
    • v.29 no.4
    • /
    • pp.256-259
    • /
    • 1980
  • A singular pertubation theory is applied to obtain an approximate solution for suboptimal control of nuclear reactors with spatially distributed parameters. The inverse of the neutron velocity is regarded as a small perturbing parameter, and the model, adopted for simplicity, is a cylindrically symmetrical reactor whose dynamics are described by the one group diffusion equation with one delayed neutron group. The Helmholtz mode expansion is used for the application of the optimal theory for lumped parameter systems to the spatially distributed parameter systems. An asymptotic expansion of the feedback gain matrix is obtained with construction of the boundary layer correction up to the first order.

  • PDF

An Algorithm for Transformer Tap Estimation by WLAV State Estimator (가중최소절대값을 이용한 변압기 텝 추정 알고리즘)

  • Kim, Hong-Rae;Kwon, Hyung-Seok
    • Proceedings of the KIEE Conference
    • /
    • 1999.11b
    • /
    • pp.279-281
    • /
    • 1999
  • This paper addresses the issues of the parameter error detection and identification in power system. The parameter error identification is carried out as part of the state estimation procedure. The weighted least absolute value(WLAV) estimation method is used for this procedure. The standard formulation of the state estimation problem is modified to include the effects of the parameter errors as well. A two step procedure for the detection and identification of faulted parameters is proposed. Supporting examples are given using IEEE 14 bus system.

  • PDF

An Analysis on Effects of Phase Compensation on Power System Stability in the PSS Parameter Tuning (PSS Tuning시 위상보상이 계통안정도에 미치는 영향 분석)

  • Kim, Tae-Kyun;Shin, Jeong-Hoon
    • Proceedings of the KIEE Conference
    • /
    • 1998.07c
    • /
    • pp.1147-1149
    • /
    • 1998
  • This paper presents the result of an analysis on effects of phase compensation on power system stability in the PSS parameter tuning. Synchronizing and damping coefficients are induced from lineal model for generator with PSS. Synchronizing and damping coefficients corresponding to time constants of phase compensation control block are calculated on a single machine, infinite bus test system. The Parameter tuning concepts, basic function, structural elements and performance criteria of PSS are introduced.

  • PDF

Dead Beat Controlled PWM Inverter with On Line Parameter Estimation (적응 추정 기법을 이용한 PWM 인버터의 Dead Beat 제어)

  • Roh, Chung-Wook;Moon, Gun-Woo;Jung, Young-Seok;Yoon, Myung-Joong
    • Proceedings of the KIEE Conference
    • /
    • 1995.07a
    • /
    • pp.388-390
    • /
    • 1995
  • A new control scheme based on dead beat control with adaptive parameter estimation for PWM Inverter is proposed. The proposed scheme updates dead beat control parameters continouously, and make PWM inverter excellent performance at any load or parameter condition. Simulation results show very attractive features in this proposed scheme.

  • PDF

합성시험에 관한 연구

  • 변승봉
    • 전기의세계
    • /
    • v.29 no.6
    • /
    • pp.354-361
    • /
    • 1980
  • Weil-Dobke 회로 및 2-parameter TRV회로의 문제점을 검토하고 비교적 간단한 네가지의 4-parameter TRV 회로에 대한 기초적인 검토가 이루어졌으나 현단계에서 각 회로에 대한 회로계산등의 적극적인 검토를 할 수는 없었고 앞으로 컴퓨터나 TNA등의 설비를 이용할 수 있을 경우 전반적인 비교검토를 하고 그것을 바탕으로 우리 연구소의 기존 설비를 최대로 활용할 수 있는 회로를 채택하는 것이 바람직하다.

  • PDF

Effect of Electrical Stimulation using ABR and ECochG Analysis based on Jastreboff Tinnitus Mocel (Jastreboff 이명 모델에서의 ABR과 ECochG 신호분석을 통한 전기자극의 효과)

  • 임재중;김경식;김남균;전병훈
    • Journal of Biomedical Engineering Research
    • /
    • v.20 no.4
    • /
    • pp.471-477
    • /
    • 1999
  • Many researches have been performed whether electrical stimulation could be used for diagnosis and treatment on the auditory system impairment. Unfortunately, there were no standard methods or theoretical background for choosing stimulus conditions because of the lack of understanding on the transmission of electrical stimulation through the auditory pathway. This research was conducted to observe the effect of electrical stimulation on the tinnitus-induced animals. Nine guniea pigs were used for the experment and divided into two groups, five animals for the experimental group(A) and four animals for the control group(B). Experimental conditions were divided into four steps, before tinnitus induction and 1, 6, 12 hours after tinnitus induction using salicylate based on the Jastreboff model. In each experimental condition, ABR and ECochG were obtained, and autocorrelation coefficients were calculated from normalized waveforms based on rms values. Sum of all the autocorrelation coefficients was extracted as a parameter to observe the changes between before and after the electrical stimulation. As a result, ABR parameter values were rapidly increased 6 hours after tinnitus induction, the gradually returned back to the initial state. On the other hand, when electrical stimulation was applied, parameter values did not change compared with the initial sate. Parameter values of ECochG showed that the effect of electrical stimulation appeared 12 hours after the tinnitus induction. It was concluded that an electrical stimulation to the tinnitus-induced model changes the correlation coefficients of ABR and ECochG waveforms.

  • PDF