• 정보통신설비학회논문지
• /
• 제9권4호
• /
• pp.164-167
• /
• 2010

In this paper, an artificial transmission line of triangular-patch type with slots is proposed. This artificial transmission line is useful for miniaturizing the electrical lengths of conventional transmission lines. Also, this structure is easy to regulate the characteristic impedance and electrical lengths. The electrical lengths and the characteristic impedances of the proposed artificial transmission line with some parameters are researched and summarized The proposed artificial transmission line could be useful for compact designs for most of the passive microwave components. The optional-artificial transmission line is fabricated and measured at 2.45GHz.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1585-1591
• /
• 2009

This paper describes a new method for extracting characteristic impedance of transmission line using Substrate Integrated Artificial Dielectric (SIAD). The new procedure to calculate the characteristic impedance of SIAD transmission line is described with the proper equations and basic transmission line theory. The characteristic impedance is determined as an almost fixed value in the proposed method, while it fluctuates according to frequency in the previous method. As the result, the effective dielectric constant of SIAD transmission line is calculated as a fixed value rather than fluctuating one. In order to show the validity of the proposed method, SIAD microstrip lines are simulated and measured, and characteristic impedances and effective dielectric constant are calculated and compared to the previous method.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권8호
• /
• pp.432-437
• /
• 2004

Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2541-2548
• /
• 2010

본 논문에서는 결함접지구조와 포토닉 밴드갭과 같은 주기구조가 삽입된 전송선로의 특성 임피던스 계산에 대하여 기술한다. ${\lambda}$/4 전송선로 이론을 이용한 계산하는 종래 방법을 고찰하고, 이 방법에 의한 계산 결과가 주파수 의존성이 커서 신뢰도가 낮다는 문제점을 제시한다. 균일한 유전체 기판에 구현된 전송선로의 특성 임피던스 계산에 적용되는 해석적인 방법을 주기구조가 결합된 전송선로에서도 적용될 수 있음을 보인다. ${\lambda}$/4 전송선로 방법과 대신 해석적 방법으로 특성 임피던스를 구하고, 후자의 결과가 주파수에 관계없이 비교적 고정된 값을 가짐을 제시한다. 또한 종래에 특성 임피던스 계산 사례가 없었던 PBG 구조를 지닌 전송선로에 대해서도 특성 임피던스를 계산한다. 시뮬레이션뿐만 아니라 직접 제작하여 측정한 S-파라미터로부터 각각 특성 임피던스를 계산하고 서로 비교하여 상당히 유사함을 보인다. 그리고 이를 통하여 해석적 방법에 의한 특성 임피던스의 결정 방법이 DGS와 PBG와 같은 주기구조가 결합된 전송선로의 특성 임피던스 계산에 잘 적용될 수 있음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2699-2701
• /
• 2002

In this study, a system for measurement of impedance (transmission parameter) on the human muscle was constructed. The system composed of the stimulating part for input with milli-voltage and the measuring part for measurement of transmission voltage in human muscle. As a result of this experiment, the frequency characteristic of each subject represent that the transmission voltage goes up in spite of a constant input voltage according to frequency (1Hz -50kHz) increment. Namely, the amplitude of input signal was not reflected but frequency was reflected on the measured results. This result be estimated that the proposed system is able to measure passive electrical characteristic of human body.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.349-355
• /
• 2009

As electrical power demand is gradually increasing, the construction of power transmission facility is unavoidable. However difficulties which resulted from increasing of complaints and NYMBY make power transmission tower to be more environmentally friendly. As an alternative proposal, a new method which is changing conventional iron arm for insulation arm which is made of FRP(Fiber Glass Reinforced Plastics) is in progress. In this paper, we discussed environmentally friendly characteristic of domestic 154 kV testing transmission tower whose insulation arms have same mechanical and excellent electrical properties compare to conventional heavy iron arm.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1500-1506
• /
• 2008

In this paper, we proposed new reliability characteristic curve, which-can clearly show reliability property of transmission and substation system considering uncertainty such as frequency and duration of device fault. It express the relationship of duration of load curtailments, demand not supplied, and energy not served as “ y = $ax^{-1}$ " curve. and we proposed the method, which can objectively assess reliability of transmission and substation system using proposed characteristic curve as new reliability index. In this method, we used energy index of reliability(EIR) as a criterion of assessment. Finally, we performed a variety of case study for KEPCO system in order to verify usefulness of proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2050-2058
• /
• 2018

Impulse characteristic of transmission tower grounding grid is needed for lightning protection of transmission line. This paper describes an outdoor experimental test facility established for large-scale grounding grid of transmission tower, made up of four impulse current generators and a circle current return electrode. The amplitude of impulse current is up to 100 kA. The results of the CDEGS simulation and GPR measurement reveal the uniform current distribution in the test arrangement. An impulse test for a square electrode with extended conductors is carried out in condition of three current waveforms with different amplitude. Based on the electrical network model and iterative algorithm method, a calculation model is proposed to simulate the impulse characteristic of large-scale grounding grid considering soil ionization. The curve of impulse resistance against the current amplitude shows the soil ionization both from the simulation and test. Deviation between the simulation and test result is less than 15%.

• 한국항행학회논문지
• /
• 제21권3호
• /
• pp.287-293
• /
• 2017

본 논문은 균일한 임피던스를 갖는 출력 포트사이 전송선로의 전기적 길이를 다르게 함으로서 비대칭 Bagley 분배기 설계에 대한 내용을 서술하였다. 이 분배기는 입력 포트와 연결된 출력 포트의 전기적 길이만을 조정하여 출력 포트에 원하는 임의의 출력 비율을 얻을 수 있고, 모든 전송선로의 특성 임피던스는 균일한 것이 특징이다. 이러한 설계 방법을 사용하면 비대칭 출력을 얻을 수 있음에도 출력포트에는 임피던스 변환기를 사용하지 않는다. 이것을 증명하기 위해서 동작주파수 2 GHz에서 1:2:1 비율의 3차와 2:3:4:3:2 비율의 5차 비대칭 Bagley 분배기를 시뮬레이션과 제작하였다. 측정 결과는 시뮬레이션과 동일함을 확인하였다.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1725-1729
• /
• 2013

In this paper, the modeling and simulation of infrared absorption in an infrared absorbing structure with the cascaded transmission line model were carried out. Each layer in the infrared absorbing structure can be modeled as a characteristic impedance of the cascaded transmission line model. The simulation results show that the cavity thickness to get a maximum absorption should be less than a quarter wavelength, which is somewhat different from prevalent thickness. It can be assured that the sheet resistance of an absorbing layer to get a maximum absorption is $377{\Omega}/{\square}$, that the thickness of the absorbing layer dose not affect the spectral characteristics of absorption. It is also shown that the thickness of the active layer is not critical to the IR absorption. It can also be assured that the validation of this modeling is proved in comparison with the previous results from similar absorbing structures.