• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.734-740
• /
• 2023

Hydrogen emphasis on safety management due to its high potential for accidents from wide explosive limits and low ignition energy. To prevent accidents, appropriate explosion-proof electrical equipment with installed to safe management of ignition sources. However, designing all facilities with explosion-proof structures can significantly increase costs and impose limitations. In this study, we optimize the barrier to effectively control the initial momentum in case of hydrogen release and form the control room as a non-hazardous area. We employed response surface method (RSM), the barrier distance, width and height of the barrier were set as variables. The Box-Behnken design method the selection of 15 cases, and FLACS assessed the presence of hazardous area. Analysis of variance (ANOVA) analysis resulting in an optimized barrier area. Through this methodology, the workplace can optimize the barrier according to the actual workplace conditions and classify reasonable hazardous area, which is believed to secure safety in hydrogen facilities and minimize economic burden.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.183-191
• /
• 2021

A battery management system (BMS) provides some functions for ensuring safety and reliability that includes algorithms estimating battery states. Given the changes caused by various operating conditions, the state-of-health (SOH), which represents a figure of merit of the battery's ability to store and deliver energy, becomes challenging to estimate. Machine learning methods can be applied to perform accurate SOH estimation. In this study, we propose a Long-Term Recurrent Convolutional Network (LRCN) that combines the Convolutional Neural Network (CNN) and Long Short-term Memory (LSTM) to extract aging characteristics and learn temporal mechanisms. The dataset collected by the battery aging experiments of NASA PCoE is used to train models. The input dataset used part of the charging profile. The accuracy of the proposed model is compared with the CNN and LSTM models using the k-fold cross-validation technique. The proposed model achieves a low RMSE of 2.21%, which shows higher accuracy than others in SOH estimation.

• 교육녹색환경연구
• /
• 제17권2호
• /
• pp.22-37
• /
• 2018

본 연구는 '유치원 어린이집 간 격차 완화'를 위한 하나의 방안으로 '교육시설 질 균등화'를 위해 우선적으로 영유아 교육 보육 통합시설이 갖추어야 할 필요공간과 면적기준(안)을 제시하는 데 목적을 두었다. 그 결과 첫째, 영유아 교육 보육 통합시설에 필요한 공간의 종류를 표15와 같이 반드시 필요한 필수공간과 교육 보육 활동의 질적 수준을 높이기 위해 추가되면 좋을 권장공간으로 구분하여 제시하였다. 둘째, 영유아 교육 보육 통합시설의 필요 공간별 면적기준(안)을 표23과 같이 제시하였다. 아울러 영유아 교육 보육 통합시설에 필요한 영유아 1인당 대지면적과 연면적, 연면적 대비 공용면적의 비율을 각각 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.492-494
• /
• 1999

To improve safety operation of urban transit, compatible design of signaling system is most important factor at future train operation and management. Therefore, signaling system should be designed compatible transport demand of target year. In addition, signaling system should be designed improved train safety, based fail-safe principle. Most of all, to solve passenger concentration, high density and to improve efficiency of train operation. Headway improvement of train is most important. Train organization length of new urban transit as light rail is generally shorter than EMU. Therefore, to increase passenger service and operation efficiency, minimum headway of one minute in this system should be important required.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1579-1582
• /
• 2005

철도 운전사고의 대부분을 차지하는 철도건널목에 대한 기존의 사고예측식은 국외의 경우 Peabody Dimmick Formula, New Hampshire Index, National Cooperative Highway Research Program(NCHRP) report 50, U.S. Department of Transportation(DOT) 사고예측식 등을 이용하고 있었으며, 국내의 경우, U.S. DOT 사고예측식의 입력변수를 다변량 분석법을 이용하여 국내에 맞게 조정한 사고예측식을 이용하고 있다. 그러나 위에서 제시한 철도건널목 사고예측식은 철도건널목에서 발생하는 사고를 단순히 철도통행량, 도로통행량, 선로수, 도로수 등의 요인에 국한하여 분석한 것이고, 사고예측식 자체가 철도건널목에만 국한된다는 맹점을 안고 있어서 철도건널목장치라든지 철도건널목을 이용하는 사람들의 성향 등, 여러 인자를 고려한 철도건널목에서의 안전성분석 및 대책을 제시할 필요가 있다. 본 논문에서는 철도건널목장치를 포함하여 다른 시스템에도 범용적으로 적용할 수 있고, 제한된 변수에만 국한하지 않아 여러 사항을 고려할 수 있는 안전성분석 절차를 제시하였는데 이 안전성 분석 절차를 철도건널목에 적용함으로써 시스템의 위험요인을 분석하고, 이에 대한 원인 및 결과, 손실을 도출한 후 대책을 제시할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.871-872
• /
• 2009

비행자료처리시스템은 항공기의 안전 운항을 위한 비행전문, 관제사 입력 정보 등의 각종 비행자료를 처리하고 배포하는 시스템이다. 본 논문에서는 현재 국내에서 진행되고 있는 차세대 항공관제시스템 개발과 관련하여 비행자료처리시스템에 적용하기 위한 항공기 항적 추정 및 위치 오차 발생 시 보정하는 방법에 대한 요구사항을 정의하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.212-214
• /
• 2006

Air Management System is composed by Pump, Fan, Compressor and Blower In general their performances depend on the capability of the motor, power converter device and controller. Especially, it should be noticed upon designing Air Management System using for Fuel Cell System, that Pump, Fan, Compressor and Blower satisfy the condition of the high performance, high efficiency, high density and reasonable price considering the safety and Economic Efficiency. In order for this, it should be studied that which kind of Motor is the most suited for Air Management System for Fuel Cell, such as Induction Motor, Brushless DC Motor, and Switched Reluctance Motor which is widely using in industry. This paper presents the designing and manufacturing of Outer Rotor Type BLDC Motor and Driver for Air Blower of Air Management System. Experimental results from a laboratory prototype arc presented to validate the feasibility of the proposed Air Blower Motor and Driver.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.705-711
• /
• 2022

Roadway lighting is an integral element of a highway system. Luminaires on roadways provide viewing conditions for drivers and pedestrians during nighttime in order to improve safety. It is time-consuming and labor-intensive to manually measure roadway illuminance at predetermined spots with a handheld illuminance meter. To improve the efficiency of illuminance measurement, a remote-control electrical cart and a drone were utilized to carry an illuminance meter for the measurements. The measurements were performed on the marked grid points along the pavement. To measure the illuminance manually, one person measures illuminance at each grid point with the handheld meter and another person records the illuminance value. To measure the illuminance with the remote-control cart, the illuminance meter is attached to the cart and it measures illuminance values continuously as the cart moves along the grid lines. With the drone, the meter records the illuminance continuously as the drone carries the meter and flies along the grid line. Because the drone can fly at different heights, the measurements can be done at different altitudes. The illuminance measurements using the cart and the drone are described in detail and compared with manual measurements in this paper. It is shown through this study that automated measurements can greatly improve the efficiency of roadway illuminance data measurements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.756-760
• /
• 2005

By development of a robot technology, personal robot is being developed very actively. Various infra-technologies are accumulated in hardware and software how by internal a lot of research and development efforts, and it is circumstance that actual commodity is announced. But, personal robot is applied to be acting near human, and takes charge of safety and connected directly a lot of works of home security, gas-leakage, fire-warning facilities, or/and etc. So personal robot must do safe and stable action even if any unexpected accidents are happened, important functions are always operated. In this paper, we are wished to show design structures for supporting fault-tolerant operation from our real-time robot middleware viewpoint. Personal robot, in being developed, was designed by module structure to do to interconnect and to interoperate among each module that is mutually implemented by each research facilities or company. Also, each modules can use appreciate network system that is fit for handling and communicating its data. To guarantee this, we have being developed a real-time network middleware, for especially personal robot. Recent our working is to add and to adjust some functions like connection management, distributed routing mechanism, remote object management, and making platform independent robot application execution environment with self-moving of robot application, for fault-tolerant personal robot.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.327-332
• /
• 2019

Recently, inverter control systems have attracted immense attention to increase the energy efficiency. However, such systems use repeated on/off high currents for linear operation control, instead of the prevalent step variable current control method. Hence, there arise concerns of personal and property damage, especially due to the durability, explosive characteristics, and operating speed of the fuse, which is responsible for safety and is one of the internal components using current control. Therefore, in this paper, we propose an IEC60127-4 SMD sub-miniature fuse, consisting of Ag-Cu alloys and ceramic powder for arc soothing. The IEC60127-4 SMD sub-miniature fuse has high durability and cut-off capacity, and operates safely in dangerous circumstances caused by the inverter control system.