• 전기의세계
• /
• v.21 no.3
• /
• pp.41-47
• /
• 1972

The requirements of a successful design for single phase induction motors with a high efficiency have, in recent years, led to the use of non-quadrature stator windings motors in which a high starting torque is a prime requisite. The capacitor motor is one of above machines in which various possible forms of asymmetry can be occur. These forms of asymmetry in the stator phase windings, encountered in machine designs, are 1) an asymmetrical disposition in space of their magnetic axes, 2) a difference in their effective number of turns, 3) a difference in the distribution of their coil groups per pole and 4) amounts of capacitance of an auxiary winding. In order to apply the effective performance prediction of these form to motors, mading of lower quality-domestic magnetic materials, the analysis and the experimental investigations of its sample motors are described in this paper. The utility of such a motor is demonstrated and it is shown that the effects- a good efficiency, good power factor and high starting torque-of the motor mechanism with non-quadrature stator phase windings can development disadvantages by using the lower quality-domestis magnetic materials.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.6-8
• /
• 1996

Induction Motors are preferred because of their ability to achieve higher power density, efficiency and reliability than permanent DC Motors for Electric Vehicle Drives. This paper describes induction motor design procedure to achieve high power density for EV using nonlinear optimization technique. Objective functions are considered to improve power density and a set of eight design variables is identified. As a numerical example, an induction motor of 15kW, 3 phase and 4 pole is designed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1888-1893
• /
• 1991

Systematic design of a controller for a water temperature system was considered, with the intention of devising an accurate control experiment. The results of an experiment using a water temperature system based on the pole placement regulator showed water temperature oscillation and steady state error. This paper proposed a. method for eliminating both the oscillation and the steady state error. The oscillation was eliminated by a drive delay compensation technique, in which a future state value of the system was predicted through a real time computer simulation. The steady state error was eliminated by an steady state error correction technique, in which an actual steady state heatrate in the system model was replaced by an imaginary heatrate. By combining these two techniques, we obtained an experimental result for water temperature control of 0.01 (.deg. C) accuracy. Furthermore, the proposed method was evaluated relatively by comparing the experimental results using several other methods and proved to be the most accurate and convenient control method for the delay system.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.117-120
• /
• 2010

A novel stepped-patch loaded coplanar waveguide(SPLCPW) structure is proposed and applied to the design of a low-pass filter(LPF). The stepped-patch loaded on the opposite side of the CPW plane is shown to provide a shunt-connected series L-C resonance, which is dual to that of a conventional CPW defected ground structure(DGS). As a simple example of the proposed SPLCPW circuit, a 3-pole SPLCPW LPF is designed and good results are obtained.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.106-109
• /
• 1991

A magnet is designed and analysed using a finite element method program (FLUX2D), which will be employed to the 2-module MAGLEV test vehicle for developing of DAE JEON EXPO '93 Magnetic Levitation System. Levitation force. guidance force and thermal characteristics are examined according to the variation of parameters of the magnet ie. pole width, window area, rail configuration, input current and so on. An optimal geometry of the magnet are provided.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.86-89
• /
• 1991

In recent years, Vacuum Circuit Breaker(VCB) has been widely used to enhance the confidence and at the same time to ease maintenance of waterworks requipment as the power supply breaker of high voltage motor. When making and breaking the sources as VCB the powerful surge voltage, repetitive reignition phenomenon resulted from exceeding inter-pole endurance voltage of CB, has occured. It has transmitted to the winding of motor stator through the cable, and this surge voltage is repeated over and over again before finishing making and breaking action of CB according to cumulation of repetitive reignition surge, motor has become burned in the end. This paper describes surge voltage occuring in making and breaking of VCB as circuit parameters by transient phenonenon and examines closely the variance of peak values, wavefront-length, wavetail-length, when changing inductance and capacitance of a cable. Finally we will expect to protect motor winding breakdown from surge voltage through parallel connection of suitable-size in the motor.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.292-295
• /
• 1991

The life of the transformers is significantly dependent upon the rate of thermal deterioration in the employed insulating materials. Therefore, the study should be based on hot-spot temperature considerations for the life expectancy and possible overload of transformer. We have measured directly temperature of the winding using thermocouples and these test results are compared with those obtained from computer simulation. In this work, our fundamental investigations are well described for the analysis in the thermal distribution of the oil-immersed transformer with the rating of 30kVA.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1089-1090
• /
• 2011

This paper presents a novel two-phase two-pole permanent magnet synchronous motor (PMSM) with asymmetric U-core stator structure. The construction and parameters of the novel two-phase U-core PMSM are compared with a conventional U-core single-phase PMSM (SPMSM). Then transient characteristics such as torque, back-emf, and power loss of the both PMSMs are analyzed by using 3-D Finite Element Method (FEM). Under the same condition of rated input current, synchronous speed, similar dimensions and volume, FE results show that the two-phase PMSM with U-core stator has significantly less torque ripple than single-phase U-core PMSM, with similar power loss and efficiency.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.941-942
• /
• 2011

A thermal equivalent circuit of IPMSM considering eddy current loss of PM and core loss of rotor is proposed. This thermal equivalent model is represented by the thermal resistances and thermal capacitances. In order to determine the factor of each parameter, a heating test is processed. Additionally, the eddy current loss of PM is calculated by a transient 3D finite element analysis. Finally, this thermal equivalent model is verified by a temperature test in a 25kW 12-pole/18-slot IPMSM with varying load.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1495-1496
• /
• 2011

Anodic aluminum oxide (AAO) nanotemplates for nano electronic device applications have been attracting increasing interest because of ease of fabrication, low cost process, and possible fabrication in large area. The size and density of the nanostructured materials can be controlled by changing the pore diameter and the pole density of AAO nanotemplate. In this paper, AAO nanotemplate was fabricated by second anodization method. In addition, effects of electrolyte and anodization voltate on the microstructure of porous alumina films were investigated. Vertically well aligned pores had the average pore sizes of 15-70 nm and the length of approximately 40 ${\mu}m$.